GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC697CPX782 |
| Series: | Series 90-70 |
| UPC: | 799705792791 |
Description:
The IC697CPX782 is a 96 Megahertz, 32-Bit, Floating Point CPU with 1 Megabyte of memory. It is branded and manufactured by GE Fanuc Emerson. This hardware is programmed with MS-DOS or Windows based programming software to provide real-time control of machines, processes, and material handling systems.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC697CPX782 is a 96 Megahertz, 32-Bit, Floating Point CPU with 1 Megabyte of memory. This hardware serves as a single-slot CPU with three serial ports and provides 1 Megabyte of battery-backed memory in the same slot. Additional features of the IC697CPX782 include 256K of non-volatile user flash memory, BMA support (7.92 or later), and support of floating-point calculations. The IC697CPX782 has 12K inputs and outputs and up to 8K analog I/O. The microprocessor used for this module is an 80486DX4 (96 Megahertz). It has configurable program and data memory, a battery-backed calendar clock, a three-position operation mode switch, and password-controlled access. The IC697CPX782 also provides remote programmer key switch memory protection, seven status LEDs, software configuration (No DIP switches or jumpers), in-system upgradable firmware, and three Series Ninety Protocol (SNP Slave) ports.
This IC697CPX782 CPU utilizes non-volatile flash memory for storage of the system firmware; by doing this, it allows for updates without having to disassemble the IC697CPX782 module or replace EPROMs. To update the operating system firmware, connect a PC compatible computer to the serial port on the module and run the software included with the firmware upgrade kit. Specifications for the IC697CPX782 include a battery shelf life of 5 years at 20 degrees Celsius (68 degrees Fahrenheit) and a battery memory retention of 6 months nominal without applied power. The current required from 5 Volt bus is 3.1 Amperes nominal and the module has an operating temperature range between 0 and 60 degrees Celsius, or 32 to 140 degrees Fahrenheit. Time of day clock accuracy for the IC697CPX782 is 3.5 seconds per day maximum, while elapsed time clock accuracy is .01% maximum.
Technical Specifications
| Brand | GE Fanuc Emerson |
| Battery-Backed Memory | 1 Megabyte |
| Non-Volatile User Flash Memory | 256K |
| Floating Point Calculations | Yes |
| Microprocessor | 96 Megahertz, 80486DX4 |
| Status LEDs | 7 |
| Battery Shelf Life | 5 Years at 20 Degrees Celsius |
| Battery Memory Retention | 6 Months nominal without Applied Power |
| Current required from 5 Volt Bus | 3.1 Amperes nominal |
| Operating Temperature | 0 to 60 degrees Celsius |
| Time of Day Clock Accuracy | 3.5 Seconds per Day (Maximum) |
| Elapsed Time Clock (internal timing) Accuracy | .01% maximum |
FAQ
Question: Does Automation Stop offer repairs on the IC697CPX782?
Answer: Yes. We offer repairs for the IC697CPX782 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC697CPX782?
Answer: If you buy the IC697CPX782 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC697CPX782 online?
Answer: Yes. Automation Stop sells the IC697CPX782 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC697CPX782?
Answer: The IC697CPX782 is made by Emerson - GE Fanuc.
Question: What is the Battery random-access memory (RAM) Retention of the IC697CPX782?
Answer: The Allen-Bradley IC697CPX782 has a Battery random-access memory (RAM) Retention of 6 Months nominal without Applied Power.
Question: What Battery Shelf Life does the Rockwell-Automation IC697CPX782 have?
Answer: The IC697CPX782 has a Battery Shelf Life of 5 Years at 20 Degrees Celsius.
Question: What is the Battery-Backed random-access memory (RAM) of the Allen Bradley IC697CPX782?
Answer: The Battery-Backed random-access memory (RAM) of the IC697CPX782 is 1 MB (megabyte).
Question: What Brand is included with the IC697CPX782?
Answer: The IC697CPX782 has a GE Fanuc Emerson Brand.
Question: What is the Current required from 5 Volt Bus of the Allen Bradley Automation IC697CPX782?
Answer: The IC697CPX782 has a Current required from 5 Volt Bus of 3.1 Amperes nominal.
Question: What is the Elapsed Time Clock (internal timing) Accuracy of the IC697CPX782?
Answer: The Elapsed Time Clock (internal timing) Accuracy of the Rockwell-Automation IC697CPX782 is .01% maximum.
Question: Does the Allen Bradley/Rockwell Automation IC697CPX782 have a Floating Point Calculations?
Answer: Yes.
Question: What Microprocessor does the IC697CPX782 have?
Answer: The Allen Bradley IC697CPX782 has a Microprocessor of 96 Megahertz, 80486DX4.
Question: What Non-Volatile User Flash random-access memory (RAM) does the IC697CPX782 have?
Answer: The Non-Volatile User Flash random-access memory (RAM) of the IC697CPX782 is 256K.
Question: What is the Operating Temperature of the Allen-Bradley IC697CPX782?
Answer: The Operating Temperature of the Allen-Bradley IC697CPX782 is 0 to 60 degrees Celsius.
Question: What is the Status LEDs of the Allen Bradley/Rockwell Automation IC697CPX782?
Answer: The IC697CPX782 has a Status LEDs of 7.
Question: What is the Time of Day Clock Accuracy of the Allen Bradley IC697CPX782?
Answer: The IC697CPX782 has a Time of Day Clock Accuracy of 3.5 Seconds per Day (Maximum).
Series information for IC697CPX782
For additional information about IC697CPX782 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC697CPX782.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC697CPX782-CB | IC697CPX782 Series CB, Rev CB | Request a Quote |
| IC697CPX782-ED | IC697CPX782 Series ED, Rev ED | Request a Quote |
| IC697CPX782-GD | IC697CPX782 Series GD, Rev GD | Request a Quote |
| IC697CPX782-HD | IC697CPX782 Series HD, Rev HD | Request a Quote |
| IC697CPX782-JD | IC697CPX782 Series JD, Rev JD | Request a Quote |
Common Misspellings:
- IC697CPX7B2
- ICG97CPX782
- ICG97CPX7B2
- 1C697CPX782
- 1C697CPX7B2
- 1CG97CPX782
- 1CG97CPX7B2
