GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC693TCM302

IC693TCM302 Image 1 thumbnail
IC693TCM302 Image 2 thumbnail
IC693TCM302 Image 3 thumbnail
IC693TCM302 Image 4 thumbnail
IC693TCM302 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693TCM302
Series: Series 90-30
UPC: 799705798540

Description:

The GE Fanuc Emerson IC693TCM302 is a high-performance temperature control module that has eight (8) channels with eight (8) thermocouple inputs and eight (8) relay outputs which support a voltage rating range from 18 Volts DC to 30 Volts DC. The IC693TCM302 can operate either in open or closed-loop mode. This module provides a resolution of 12 bits or 0.2 degrees Celsius. The IC693TCM302 TCM module can operate either in auto or manual mode and weighs approximately 290 grams (0.65 pounds) while shipping.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC693TCM302 is a high-performance temperature control module that has eight (8) channels with eight (8) thermocouple inputs and eight (8) relay outputs which support a voltage rating range from 18 Volts DC to 30 Volts DC. The IC693TCM302 can operate either in open or closed-loop mode. This module provides a resolution of 12 bits or 0.2 degrees Celsius. The IC693TCM302 TCM module can operate either in auto or manual mode. This TCM contains twelve (12) LED indicators located on the faceplate of the module, four (4) LEDs are employed to show the current status of the TCM, and eight (8) LED indicators are employed to indicate thermocouple inputs status. This module draws a current of 150 milliamperes at a voltage of +5 Volts DC.

The IC693TCM302 can be electrically supplied by a DC supply. The IC693TCM302 includes a single replaceable fuse that has a current rating of 2 Amperes and located behind the faceplate cover. The TCM J and L thermocouples support a temperature range zero (0) to 450 degrees Celsius (32 to 842 degrees Fahrenheit) and K thermocouples support a temperature range zero (0) to 600 degrees Celsius (32 to 1112 degrees Fahrenheit). The IC693TCM302 includes a pair of plug-in connectors with captive screw terminals to connect and link RTD, relays, thermocouples and the external power to supply output relays. The IC693TCM302 weighs approximately 290 grams (0.65 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Temperature control module (TCM) for Series 90-30 PLCs
Part Number IC693TCM302
Module Type Temperature control module
Number of Channels 8
Modes Open Loop or Closed Loop mode
Temperature Range, J and L Thermocouples 0 - 450 degrees Celsius
Temperature Range, K Thermocouples 0 - 600 degrees Celsius
Resolution 12 bits / 0.2 degree Celsius
Output Status LEDs 8
Number of Thermocouple Inputs 8
Number of Relay Outputs 8
Functionality Modes Auto Mode and Manual Mode
Number of Front Panel LED Indicators 12
Load Required from Power Supply 150 milliamperes from +5 V DC supply
Output Voltage Range 18 to 30 Volts DC
Load Current 100 mA per point
DC Power Yes
Weight 290 g (0.65 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC693TCM302?

Answer: Yes. We offer repairs for the IC693TCM302 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693TCM302?

Answer: If you buy the IC693TCM302 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693TCM302 online?

Answer: Yes. Automation Stop sells the IC693TCM302 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693TCM302?

Answer: The IC693TCM302 is made by Emerson - GE Fanuc.


Question: What Brand does the Rockwell Automation IC693TCM302 have?

Answer: The IC693TCM302 has a GE Automation Fanuc / Emerson Automation Brand.


Question: Does the IC693TCM302 have a DC (direct current) Power?

Answer: Yes.


Question: What Functionality Modes does the IC693TCM302 have?

Answer: The Allen Bradley/Rockwell Automation IC693TCM302 has a Auto Mode and Manual Mode Functionality Modes .


Question: What is the Load Current of the IC693TCM302?

Answer: The Load Current of the IC693TCM302 is 100 mA per point.


Question: What is the Load Required from power supply component of the Allen Bradley/Rockwell Automation IC693TCM302?

Answer: The Load Required from power supply unit of the IC693TCM302 is 150 milliamperes from +5 V direct current (DC) supply.


Question: What kind of Modes does the Allen Bradley Automation IC693TCM302 have?

Answer: The IC693TCM302 includes Open Loop or Closed Loop mode for its Modes.


Question: What Module Type does the IC693TCM302 have?

Answer: The IC693TCM302 has a Temperature control module Module Type.


Question: What is the Number of Channels of the IC693TCM302?

Answer: The Allen Bradley/Rockwell Automation IC693TCM302 has a Number of Channels of 8.


Question: What is the Number of Front panel LED Indicators of the IC693TCM302?

Answer: The Number of Front panel unit LED Indicators of the Rockwell Automation IC693TCM302 is 12.


Question: What Number of Relay Outputs does the IC693TCM302 have?

Answer: The Allen-Bradley IC693TCM302 has a Number of Relay Outputs of 8.


Question: What Number of Thermocouple Inputs does the IC693TCM302 have?

Answer: The IC693TCM302 has a Number of Thermocouple Inputs of 8.


Question: What Output Status LEDs does the IC693TCM302 have?

Answer: The Output Status LEDs of the Allen Bradley/Rockwell Automation IC693TCM302 is 8.


Question: What is the Output Voltage Range of the Allen Bradley Automation IC693TCM302?

Answer: The Allen Bradley Automation IC693TCM302 has a Output Voltage Range of 18 to 30 Volts DC.


Question: What is the component Number of the Allen Bradley/Rockwell Automation IC693TCM302?

Answer: The Allen Bradley/Rockwell Automation IC693TCM302 has a part Number of IC693TCM302.


Question: What Resolution does the Allen Bradley/Rockwell Automation IC693TCM302 have?

Answer: The Resolution of the IC693TCM302 is 12 bits / 0.2 degree Celsius.


Question: What is the Temperature Range, J and L Thermocouples of the Rockwell Automation IC693TCM302?

Answer: The IC693TCM302 has a Temperature Range, J and L Thermocouples of 0 - 450 degrees Celsius.


Question: What Temperature Range, K Thermocouples does the Allen Bradley IC693TCM302 have?

Answer: The Allen Bradley IC693TCM302 has a Temperature Range, K Thermocouples of 0 - 600 degrees Celsius.


Question: What Weight does the IC693TCM302 have?

Answer: The Allen-Bradley IC693TCM302 has a Weight of 290 g (0.65 lb).


Series information for IC693TCM302

For additional information about IC693TCM302 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693TCM302.

Revision Part # Also Known As Availability

Common Misspellings:

  • IC693TCM3O2
  • ICG93TCM302
  • ICG93TCM3O2
  • 1C693TCM302
  • 1C693TCM3O2
  • 1CG93TCM302
  • 1CG93TCM3O2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP