GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693PWR330 |
| Series: | Series 90-30 |
| UPC: | 799705798588 |
Description:
The GE Fanuc IC693PWR330 is a High Load Power Supply component for the Series 90-30 platforms from GE Fanuc. With a nominal input voltage of 100 to 240 VAC or 125 VDC, this power source has a peak limit of 30 Watts. It includes 30 watts @ 5VDC, 20 watts @ 24VDC, and 15 watts @ +24VDC Relay output capacities.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693PWR330, a power supply for the programmable logic controllers, is from the 90-30 GE Fanuc Automation product line. The device is a high capacity power supply version, which can be plugged into a leftmost baseplate of the controllers and systems of PLC in the said series. The easy integration of the device with the 90-30 PLC(s) makes it time and cost-effective. This specific device allows a high capacity power supply between modules and other peripherals, mostly automation. The device has three outputs and 6 terminal points and has a 5VDC limit for overvoltage protection. The device can deal with both AC and DC inputs. It can operate on an input source for voltage that ranges from 58V to 264V AC. Whereas for DC, its input voltage source goes from 100V to 300V DC. The module can allow more than +5V DC even when the limit exceeds the device range. It does it by utilizing a 30W load to be consumed from the 5V DC rated supply. Besides, the input power ranges of this device are 100VA with VAC or 50 W with VDC. Moreover, the nominal rated voltage range is 120/240 VAC or 125 VDC. Apart from the input and nominal power ranges, the device has a holdup time which is 20 milliseconds, minimum. Furthermore, for communication, the device allows ports from the standards such as RS 485, a common serial port for most of the GE Fanuc's power supplies. The device also meets the CE and UL standards for its operations.
Technical Specifications
| Brand | GE Fanuc Emerson |
| Nominal Rated Voltage | 120/240 Volts AC or 125 Volts DC |
| Input Voltage Range (AC) | 85 to 264 Volts AC |
| Input Voltage Range (DC) | 100 to 300 Volts DC |
| Input Power | 100 Volt-amperes with VAC Input |
| Input Power (Maximum with Full Load) | 50 Watts with VDC Input |
| Inrush Current | 4 Amperes peak, 250 milliseconds, maximum |
| Protective Limits (Overvoltage) | 5 VDC Output: 6.4 to 7 Volts |
| Protective Limits (Overcurrent) | 5 VDC Output: 7 Amperes, maximum |
| Holdup Time | 20 milliseconds, minimum |
FAQ
Question: Does Automation Stop offer repairs on the IC693PWR330?
Answer: Yes. We offer repairs for the IC693PWR330 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693PWR330?
Answer: If you buy the IC693PWR330 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693PWR330 online?
Answer: Yes. Automation Stop sells the IC693PWR330 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693PWR330?
Answer: The IC693PWR330 is made by Emerson - GE Fanuc.
Question: What Brand is included with the Rockwell-Automation IC693PWR330?
Answer: The Rockwell-Automation IC693PWR330 has a GE Fanuc Emerson Brand.
Question: What Holdup Time does the Allen Bradley IC693PWR330 have?
Answer: The Holdup Time of the IC693PWR330 is 20 milliseconds, minimum.
Question: What Input Power does the Allen Bradley IC693PWR330 have?
Answer: The Allen Bradley IC693PWR330 has a Input Power of 100 Volt-amperes with voltage alternating current (VAC) Input.
Question: What Input Power (Maximum with Full Load) does the IC693PWR330 have?
Answer: The Input Power (Maximum with Full Load) of the Allen Bradley/Rockwell Automation IC693PWR330 is 50 Watts with VDC Input.
Question: What is the Input Voltage Range (AC (alternating current)) of the Allen Bradley-Rockwell Automation IC693PWR330?
Answer: The IC693PWR330 has a Input Voltage Range (AC (alternating current)) of 85 to 264 Volts AC (alternating current).
Question: What Input Voltage Range (DC) does the IC693PWR330 have?
Answer: The Input Voltage Range (direct current) of the Allen Bradley IC693PWR330 is 100 to 300 Volts direct current.
Question: What is the Inrush Current of the IC693PWR330?
Answer: The Inrush Current of the IC693PWR330 is 4 Amperes peak, 250 milliseconds, maximum.
Question: What is the Nominal Rated Voltage of the Allen Bradley IC693PWR330?
Answer: The Allen Bradley IC693PWR330 has a Nominal Rated Voltage of 120/240 Volts AC (alternating current) or 125 Volts direct current (DC).
Question: What is the Protective Limits (Overcurrent) of the Allen Bradley Automation IC693PWR330?
Answer: The Allen Bradley Automation IC693PWR330 has a Protective Limits (Overcurrent) of 5 VDC Output: 7 Amperes, maximum.
Question: What Protective Limits (Overvoltage) does the Rockwell-Automation IC693PWR330 have?
Answer: The Protective Limits (Overvoltage) of the Rockwell-Automation IC693PWR330 is 5 VDC Output: 6.4 to 7 Volts.
Series information for IC693PWR330
For additional information about IC693PWR330 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693PWR330.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693PWR330D | IC693PWR330 Series D, Rev D | Request a Quote |
| IC693PWR330B | IC693PWR330 Series B, Rev B | Request a Quote |
| IC693PWR330C | IC693PWR330 Series C, Rev C | Request a Quote |
| IC693PWR330F | IC693PWR330 Series F, Rev F | Request a Quote |
| IC693PWR330G | IC693PWR330 Series G, Rev G | Request a Quote |
| IC693PWR330H | IC693PWR330 Series H, Rev H | Request a Quote |
| IC693PWR330J | IC693PWR330 Series J, Rev J | Request a Quote |
Common Misspellings:
- IC693PWR33O
- ICG93PWR330
- ICG93PWR33O
- 1C693PWR330
- 1C693PWR33O
- 1CG93PWR330
- 1CG93PWR33O
