GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693PRG300 |
| Series: | Series 90-30 |
| UPC: | 458302419455 |
Description:
The GE Fanuc Emerson IC693PRG300 is a hand-held programmer (HHP) that offers the possibility to the user to debug, troubleshoot, develop, monitor, and control logic programs. The IC693PRG300 can control data tables and tune parameters for I/O points and PLC units. The IC693PRG300 supports the statement list language (STL). This HHP draws a current rating of 170 milliamperes at a voltage of +5 Volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE IC693PRG300 is a hand-held programmer (HHP) that offers the possibility to the user to debug, troubleshoot, develop, monitor, and control logic programs. The IC693PRG300 can control data tables and tune parameters for I/O points and PLC units. The IC693PRG300 supports the statement list language (STL) and is compatible with some models of the Series 90-30 PLC. The IC693PRG300 contains a 15-pin D type serial port connector to connect to CPU baseplate serial port through a cable with a length of 2 meters (6 foot) which will electrically supply the HHP and generate a signal to tell the PLC that an HHP is connected. The IC693PRG300 includes a sealed keypad with tactile feedback and forty-two (42) keys which are arranged and organized in a matrix of six keys across by seven keys down.
The IC693PRG300 can be either connected or disconnected while the PLC is turned on. The IC693PRG300 provides a two-line by sixteen character LCD screen. The IC693PRG300 includes a dedicated slot for a removable memory card which can be employed to save and recover off-line and non-volatile program and the memory card can be plugged on a slot that is located on the lower right side. This HHP draws a current rating of 170 milliamperes at a voltage of +5 Volts DC. The IC693PRG300 can operate with four modes: program, protection, data, and configuration mode, which are chosen through a key sequence located on the keypad. The IC693MDL241 weighs approximately 320 grams (0.71 pounds) while shipping.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | Hand-held programmer (HHP) for Series 90-30 PLCs |
| Part Number | IC693PRG300 |
| Supported Programing Language | Statement List Language (STL) |
| Number of Communication Ports | 1 |
| Port Connector | 15-pin D type serial port connector |
| Type of Display | LCD 16 x02 |
| Type of Input | Keypad |
| Number of Keys | 42 |
| Load Requirement | 170 mA at +5 VDC |
| Weight | 320 g (0.71 lb) |
| Memory External Slot | Yes |
| Number of Operation Modes | 4 |
| Operation Modes | Program, protection, data and configuration mode |
FAQ
Question: Does Automation Stop offer repairs on the IC693PRG300?
Answer: Yes. We offer repairs for the IC693PRG300 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693PRG300?
Answer: If you buy the IC693PRG300 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693PRG300 online?
Answer: Yes. Automation Stop sells the IC693PRG300 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693PRG300?
Answer: The IC693PRG300 is made by Emerson - GE Fanuc.
Question: What Brand does the IC693PRG300 have?
Answer: The IC693PRG300 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Load Requirement of the IC693PRG300?
Answer: The Allen-Bradley IC693PRG300 has a Load Requirement of 170 mA at +5 VDC.
Question: Does the Rockwell Automation IC693PRG300 have a random-access memory (RAM) External Slot?
Answer: Yes.
Question: What Number of Communication Ports does the IC693PRG300 have?
Answer: The Number of Communication Ports of the Rockwell Automation IC693PRG300 is 1.
Question: What is the Number of Keys of the IC693PRG300?
Answer: The Number of Keys of the Allen-Bradley IC693PRG300 is 42.
Question: What is the Number of Operation Modes of the IC693PRG300?
Answer: The Number of Operation Modes of the IC693PRG300 is 4.
Question: What kind of Operation Modes does the IC693PRG300 have?
Answer: The IC693PRG300 has Operation Modes Program, protection, data and configuration mode .
Question: What component Number does the IC693PRG300 have?
Answer: The Allen-Bradley IC693PRG300 has a part Number of IC693PRG300.
Question: What is the Port Connector of the IC693PRG300?
Answer: The Allen-Bradley IC693PRG300 has a Port Connector of 15-pin D type serial port connector.
Question: What Supported Programing Language does the Allen Bradley-Rockwell Automation IC693PRG300 have?
Answer: The IC693PRG300 has a Statement List Language (STL) Supported Programing Language.
Question: What is the Type of Display of the IC693PRG300?
Answer: The Type of Display of the Rockwell-Automation IC693PRG300 is LCD 16 x02.
Question: What Type of Input is included with the Allen Bradley IC693PRG300?
Answer: The Allen Bradley IC693PRG300 has a key Type of Input.
Question: What Weight does the IC693PRG300 have?
Answer: The Rockwell-Automation IC693PRG300 has a Weight of 320 g (0.71 lb).
Series information for IC693PRG300
For additional information about IC693PRG300 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693PRG300.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693PRG300B | IC693PRG300 Series B, Rev B | Request a Quote |
| IC693PRG300C | IC693PRG300 Series C, Rev C | Request a Quote |
Common Misspellings:
- IC693PRG30O
- IC693PRG3O0
- IC693PRG3OO
- IC693PR6300
- IC693PR630O
- IC693PR63O0
- IC693PR63OO
- ICG93PRG300
- ICG93PRG30O
- ICG93PRG3O0
- ICG93PRG3OO
- ICG93PR6300
- ICG93PR630O
- ICG93PR63O0
- ICG93PR63OO
- 1C693PRG300
- 1C693PRG30O
- 1C693PRG3O0
- 1C693PRG3OO
- 1C693PR6300
- 1C693PR630O
- 1C693PR63O0
- 1C693PR63OO
- 1CG93PRG300
- 1CG93PRG30O
- 1CG93PRG3O0
- 1CG93PRG3OO
- 1CG93PR6300
- 1CG93PR630O
- 1CG93PR63O0
- 1CG93PR63OO
