GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDR390 |
| Series: | Series 90-30 |
| UPC: | 21559705581 |
Description:
The IC693MDR390 is a 24 Volt DC Input Output Relay Module that is manufactured by GE Fanuc Automation. The module offers eight (8) inputs and one common power input terminal along with eight normally-open relay circuits.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693MDR390 is a 24 Volt DC I/O Relay Module that is manufactured by GE Fanuc Automation. The IC693MDR390 I/O Relay Module provides eight (8) inputs, eight normally-open relay circuits, and one common power input terminal. The input circuits of the module are compatible with positive or negative characteristics in which they sink or source between the input devices and a common user. The input circuits are arranged in a single group for every eight inputs. The relay output circuits are arranged in two groups each containing four circuits. For both the output groups, there is a common terminal. Input characteristics of the module are compatible with a wide range of I/O devices. Some of the devices compatible with the module include pushbuttons, limit switches, and proximity switches which can be very useful for various applications. Field devices can operate on power supplied by the user. The output loads can be controlled by the relay circuits, which are normally-open.
Each output of the module has two Amperes of switching capacity output. Relay outputs of the module can control various load devices supplied by the user like solenoids, motors, and indicators. The backplane of the IC693MDR390 I/O relay module has a 24 Volt DC bus that provides power for the internal relay circuit. The field devices connected to the module can operate on AC or DC source for power and this needs to be supplied by the user. The module includes no fuse for its protection. The IC693MDR390 consists of indicators for providing the operating status of the device indicating if the device is in an ON or OFF state. These green LED indicators are ordered in rows. These indicators are labeled as input and output points and color-coding schemes are included on these indicators to avoid handling errors.
Technical Specifications
| Input Current | 7.5 milliamperes (typical) at rated voltage |
| Inputs per Module | 8 (one group of eight inputs) |
| Isolation | 1500 Volts RMS between field and logic side |
| Input Voltage Range | -30 to +32 Volts DC |
| On-State Current | 4 milliamperes (minimum) |
| Off-State Current | 1.5 milliamperes (maximum) |
| On Response Time | 7 milliseconds, typical |
| Off Response Time | 7 milliseconds, typical |
| Rated Voltage | 24 Volts DC, 120/240 Volts AC |
| Minimum Load | 10 milliamperes |
| Maximum Inrush | 5 Amperes |
| Outputs per Module | 8 (two groups of four outputs each) |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDR390?
Answer: Yes. We offer repairs for the IC693MDR390 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDR390?
Answer: If you buy the IC693MDR390 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDR390 online?
Answer: Yes. Automation Stop sells the IC693MDR390 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDR390?
Answer: The IC693MDR390 is made by Emerson - GE Fanuc.
Question: What is the Input Current of the Rockwell Automation IC693MDR390?
Answer: The Rockwell Automation IC693MDR390 has a Input Current of 7.5 milliamperes (typical) at rated voltage .
Question: What Input Voltage Range does the Allen Bradley/Rockwell Automation IC693MDR390 have?
Answer: The Input Voltage Range of the IC693MDR390 is -30 to +32 Volts direct current.
Question: What is the Inputs per Module of the Allen Bradley-Rockwell Automation IC693MDR390?
Answer: The IC693MDR390 has a Inputs per Module of 8 (one group of eight inputs) .
Question: What is the Isolation of the IC693MDR390?
Answer: The Isolation of the IC693MDR390 is 1500 Volts RMS between field and logic side .
Question: What is the Maximum Inrush of the IC693MDR390?
Answer: The Maximum Inrush of the Rockwell-Automation IC693MDR390 is 5 Amperes .
Question: What is the Minimum Load of the IC693MDR390?
Answer: The Allen-Bradley IC693MDR390 has a Minimum Load of 10 milliamperes .
Question: What is the Off Response Time of the Rockwell-Automation IC693MDR390?
Answer: The Off Response Time of the Rockwell-Automation IC693MDR390 is 7 milliseconds, typical .
Question: What is the Off-State Current of the IC693MDR390?
Answer: The Off-State Current of the Allen-Bradley IC693MDR390 is 1.5 milliamperes (maximum) .
Question: What is the On Response Time of the IC693MDR390?
Answer: The Allen-Bradley IC693MDR390 has a On Response Time of 7 milliseconds, typical .
Question: What is the On-State Current of the IC693MDR390?
Answer: The On-State Current of the IC693MDR390 is 4 milliamperes (minimum) .
Question: What is the Outputs per Module of the IC693MDR390?
Answer: The Outputs per Module of the IC693MDR390 is 8 (two groups of four outputs each) .
Question: What is the Rated Voltage of the Allen-Bradley IC693MDR390?
Answer: The Allen-Bradley IC693MDR390 has a Rated Voltage of 24 Volts direct current (DC), 120/240 Volts AC (alternating current) .
Series information for IC693MDR390
For additional information about IC693MDR390 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDR390.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDR390C | IC693MDR390 Series C, Rev C | Request a Quote |
Common Misspellings:
- IC693MDR39O
- ICG93MDR390
- ICG93MDR39O
- 1C693MDR390
- 1C693MDR39O
- 1CG93MDR390
- 1CG93MDR39O
