GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL753 |
| Series: | Series 90-30 |
| UPC: | 371361265361 |
Description:
The GE Fanuc Emerson IC693MDL753 is a discrete logic output module that includes 32 discrete output points which can be positive logic outputs and support a voltage rating range from 12 Volts DC to 24 Volts DC. The IC693MDL753 outputs are grouped into four (4) well-isolated groups of eight (8) outputs (A1 - A8, B1 - B8, C1 - C8, and D1 - D8) with a separate common power terminal for each group. The IC693MDL753 weighs approximately 220 grams (0.48 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC693MDL753 is a discrete logic output module that includes 32 discrete output points which can be positive logic outputs and support a voltage rating range from 12 volts DC to 24 volts DC. The IC693MDL753 outputs are grouped into four (4) well-isolated groups of eight (8) outputs (A1 - A8, B1 - B8, C1 - C8, and D1 - D8) which are labeled with green LED indicators to show the status of outputs with a separate common power terminal for each group. The IC693MDL753 employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 1500 Volts between logic and field sides and 250 Volts between groups. The IC693MDL753 can be easily mounted in an I/O slot of either 5 or 10-slot baseplate.
The IC693MDL753 can be electrically supplied either by the operator or from an isolated 12/24 Volt DC supply which can be found with I/O module connectors. This module draws a current rating of 260 milliamperes at a voltage of +5 Volts DC, a current rating of 16.5 milliamperes at a voltage of 24 Volts DC, and a current rating of 9.6 milliamperes at a voltage of 12 Volts DC. The IC693MDL753 outputs draw a current rating of 0.5 milliamperes per point. The IC693MDL753 has two male 24-pin connectors (Fujitsu FCN-365P024-AU) on the faceplate which permit to link user outputs to this module. The IC693MDL753 output right-side connector is interfaced with A and B output groups and the output left side connector is interfaced with C and D output groups. The IC693MDL753 weighs approximately 220 grams (0.48 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | 32 discrete points, 12/24 volts DC 0.5 A positive logic output module for Series 90-30 PLCs |
| Part Number | IC693MDL753 |
| Number of I/O Points | 32 |
| Output Groups | 4, eight outputs each |
| Rated Voltage | 12 through 24 volts DC, positive logic |
| Output Voltage Range | 10.2 to 28.8 Volts DC |
| Isolation | 1500 Volts between field side and logic side 250 Volts between groups |
| Output Current | 0.5 Amperes per point with 4 Amperes maximum per group and 3 Amperes maximum per group common pin |
| On-State Voltage Drop | 0.3 Volts DC |
| Off-State Leakage Current | 0.1 mA maximum |
| On Response Time | 0.5 milliseconds, maximum |
| Off Response Time | 0.5 milliseconds, maximum |
| Internal Power Consumption | 260 mA (maximum) from 5 Volt bus on backplane; (13 mA + 3 mA/point ON + 4.7 mA/LED) |
| Weight | 220 g (0.48 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL753?
Answer: Yes. We offer repairs for the IC693MDL753 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL753?
Answer: If you buy the IC693MDL753 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL753 online?
Answer: Yes. Automation Stop sells the IC693MDL753 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL753?
Answer: The IC693MDL753 is made by Emerson - GE Fanuc.
Question: What Brand is included with the Allen Bradley IC693MDL753?
Answer: The IC693MDL753 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Internal Power Consumption of the Allen Bradley IC693MDL753?
Answer: The Internal Power Consumption of the Allen Bradley IC693MDL753 is 260 mA (maximum) from 5 Volt bus on backplane; (13 mA + 3 mA/point ON + 4.7 mA/LED).
Question: What Isolation does the IC693MDL753 have?
Answer: The Isolation of the IC693MDL753 is 1500 Volts between field side and logic side 250 Volts between groups.
Question: What is the Number of input/output Points of the IC693MDL753?
Answer: The Number of input/output Points of the IC693MDL753 is 32.
Question: What is the Off Response Time of the IC693MDL753?
Answer: The Off Response Time of the IC693MDL753 is 0.5 milliseconds, maximum.
Question: What is the Off-State Leakage Current of the IC693MDL753?
Answer: The IC693MDL753 has a Off-State Leakage Current of 0.1 mA maximum.
Question: What On Response Time does the Rockwell Automation IC693MDL753 have?
Answer: The IC693MDL753 has a On Response Time of 0.5 milliseconds, maximum.
Question: What is the On-State Voltage Drop of the IC693MDL753?
Answer: The On-State Voltage Drop of the IC693MDL753 is 0.3 Volts direct current.
Question: What is the Output Current of the IC693MDL753?
Answer: The Rockwell Automation IC693MDL753 has a Output Current of 0.5 Amperes per point with 4 Amperes maximum per group and 3 Amperes maximum per group common pin.
Question: What Output Groups does the IC693MDL753 have?
Answer: The IC693MDL753 has a Output Groups of 4, eight outputs each.
Question: What is the Output Voltage Range of the IC693MDL753?
Answer: The Output Voltage Range of the Allen Bradley/Rockwell Automation IC693MDL753 is 10.2 to 28.8 Volts direct current (DC).
Question: What component Number does the IC693MDL753 have?
Answer: The component Number of the Allen-Bradley IC693MDL753 is IC693MDL753.
Question: What is the Rated Voltage of the IC693MDL753?
Answer: The Rated Voltage of the Allen Bradley Automation IC693MDL753 is 12 through 24 volts DC (direct current), positive logic.
Question: What is the Weight of the IC693MDL753?
Answer: The Allen Bradley-Rockwell Automation IC693MDL753 has a Weight of 220 g (0.48 lb).
Series information for IC693MDL753
For additional information about IC693MDL753 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL753.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL753C | IC693MDL753 Series C, Rev C | Request a Quote |
| IC693MDL753D | IC693MDL753 Series D, Rev D | Request a Quote |
| IC693MDL753E | IC693MDL753 Series E, Rev E | Request a Quote |
| IC693MDL753F | IC693MDL753 Series F, Rev F | Request a Quote |
| IC693MDL753G | IC693MDL753 Series G, Rev G | Request a Quote |
| IC693MDL753K | IC693MDL753 Series K, Rev K | Request a Quote |
Common Misspellings:
- IC693MDL7S3
- ICG93MDL753
- ICG93MDL7S3
- 1C693MDL753
- 1C693MDL7S3
- 1CG93MDL753
- 1CG93MDL7S3
