GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL752 |
| Series: | Series 90-30 |
| UPC: | 553640565557 |
Description:
The IC693MDL752 is a 5/24 Volt DC Negative Logic Output module that is manufactured by GE Fanuc as part of the Series 90-30 of PLC systems. It has thirty-two (32) negative logic or sinking type output points. The module uses 32 bits of discrete %Q output data.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693MDL752 is a 5/24 Volt DC TTL Negative Logic Output module designed by GE Fanuc Automation for the Series 90-30 of PLC systems. The module has thirty-two (32) sinking type or negative logic output points and uses 32 bits of discrete %Q output data. The 32 outputs of the module are arranged into four groups; A, B, C, and D; each group comprising of eight (8) outputs numbered 1 to 8, and each group also has its own common. The IC693MDL752 can be installed in any Series 90-30 PLC system that has a 5 or 10 I/O slot baseplate. All four (4) groups of the module have user I/O connectors carrying two pins. Each pin on the connectors has a capacity of handling a current of 3 Amperes. It is recommended to make connections to both the pins when connecting the common for applications that require a high current between 3 to 4 Amperes.
The IC693MDL752 can be operated in two different modes: Transistor-Transistor Logic mode, or TTL, and a 12/24 Volt mode. In the TTL mode, the outputs of the module can switch user loads across +5 Volts DC. In the 12/24 Volt mode, the user loads can be switched in the range +12 to 24 Volts DC. The output points in TTL mode can sink a current of 25 milliamperes per point and 0.5 Amperes per point in the 12/24 Volt mode. Each group of outputs can be utilized in the operating mode appropriate to the load requirements of the specific application. Group A can be applied to TTL load task, Group B to 12 Volt DC loads, and group C and D that can be applied to load tasks of 24 Volts DC. When mixing the operating modes of the module, it is important to take cognizance of electrical noise and its effect on the system.
Technical Specifications
| Rated Voltage | 5 and 12 thru 24 Volts DC |
| Number of Outputs | 32 |
| Output Current | 25 milliamperes per point |
| Isolation | 1500 Volts between field side and logic side, 250 Volts between groups |
| Output Voltage Range | 4.75 to 5.25 Volts DC |
| Outputs per Module | 10.2 to 28.8 Volts DC (12/24 Volts mode) |
| On-state (Active Low) | 4.6 Amperes for 10 milliseconds |
| Off-State Leakage Current | 0.1 milliamperes, maximum |
| On Response Time | 0.5 milliseconds, maximum |
| Voltage Drop | 0.4 Volts DC (maximum in 12/24 Volts mode) |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL752?
Answer: Yes. We offer repairs for the IC693MDL752 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL752?
Answer: If you buy the IC693MDL752 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL752 online?
Answer: Yes. Automation Stop sells the IC693MDL752 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL752?
Answer: The IC693MDL752 is made by Emerson - GE Fanuc.
Question: What is the Isolation of the Allen Bradley IC693MDL752?
Answer: The Allen Bradley IC693MDL752 has a Isolation of 1500 Volts between field side and logic side, 250 Volts between groups.
Question: What Number of Outputs does the IC693MDL752 have?
Answer: The Number of Outputs of the Allen Bradley/Rockwell Automation IC693MDL752 is 32.
Question: What Off-State Leakage Current does the Allen-Bradley IC693MDL752 have?
Answer: The Off-State Leakage Current of the Allen-Bradley IC693MDL752 is 0.1 milliamperes, maximum.
Question: What is the On Response Time of the IC693MDL752?
Answer: The On Response Time of the Rockwell-Automation IC693MDL752 is 0.5 milliseconds, maximum.
Question: What is the On-state (Active Low) of the IC693MDL752?
Answer: The IC693MDL752 has a On-state (Active Low) of 4.6 Amperes for 10 milliseconds.
Question: What is the Output Current of the Allen Bradley/Rockwell Automation IC693MDL752?
Answer: The Output Current of the Allen Bradley/Rockwell Automation IC693MDL752 is 25 milliamperes per point.
Question: What is the Output Voltage Range of the Allen Bradley-Rockwell Automation IC693MDL752?
Answer: The Allen Bradley-Rockwell Automation IC693MDL752 has a Output Voltage Range of 4.75 to 5.25 Volts direct current.
Question: What Outputs per Module does the IC693MDL752 have?
Answer: The Outputs per Module of the Allen Bradley-Rockwell Automation IC693MDL752 is 10.2 to 28.8 Volts DC (12/24 Volts mode).
Question: What is the Rated Voltage of the IC693MDL752?
Answer: The Rated Voltage of the IC693MDL752 is 5 and 12 thru 24 Volts DC (direct current).
Question: What Voltage Drop does the Rockwell-Automation IC693MDL752 have?
Answer: The IC693MDL752 has a Voltage Drop of 0.4 Volts DC (maximum in 12/24 Volts mode).
Series information for IC693MDL752
For additional information about IC693MDL752 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL752.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL752C | IC693MDL752 Series C, Rev C | Request a Quote |
| IC693MDL752D | IC693MDL752 Series D, Rev D | Request a Quote |
| IC693MDL752E | IC693MDL752 Series E, Rev E | Request a Quote |
| IC693MDL752F | IC693MDL752 Series F, Rev F | Request a Quote |
| IC693MDL752G | IC693MDL752 Series G, Rev G | Request a Quote |
| IC693MDL752J | IC693MDL752 Series J, Rev J | Request a Quote |
| IC693MDL752K | IC693MDL752 Series K, Rev K | Request a Quote |
Common Misspellings:
- IC693MDL7S2
- ICG93MDL752
- ICG93MDL7S2
- 1C693MDL752
- 1C693MDL7S2
- 1CG93MDL752
- 1CG93MDL7S2
