GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL740 |
| Series: | Series 90-30 |
| UPC: | 90798663693 |
Description:
The IC693MDL740 of GE Fanuc 90-30 Family is a 12/24 positive logic DC output module. The module supplies current from the positive voltage bus terminal or the standard user to the required loads since it has positive logic. In addition, the output electrical device for this PLC I/O digital module is between the output module and the power bus.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693MDL740 is a Digital I/O module made by GE Fanuc Automation PLC 90-30. Moreover, this positive output logic module is a sourcing circuit type that has 16 channels. The module takes different voltage types. Such as an output voltage range of 12 to 24 V DC (+20%, –15%). The nominal voltage range of 12/24 V DC and Output Voltage Drop of 1 V maximum. It also has two groups. Each has eight channels completing the total number of 16. The output current per channel is 0.5amps and 2amps for 10ms output current per common. Furthermore, the IC693MDL740 has an inrush current of 4.78 amps for 10 ms. The module is ON-Response time is 2ms maximum. Furthermore, it has 16 output points and a module peak current draw range of 110 milliamps. In contrast, the input voltage range for this module is 5 Volts DC. Concerning the environment, it has a relative non-condescending relative humidity that ranges between 5 to 95%. At the same time, the storage temperature for this I/O is -40 to 85 degrees Celsius, and the operating temperature is 0 to 60 degrees Celsius. In addition, it has four LEDs for display features that indicate the operations' status to the users. Besides, these indications help establish the state of the module's 16 channels. The module is capable of integrating with various types of standard electrical loads for a power supply boost. Some of which include buzzers, horns, pilot lamps, contactors, and relay overloads, to name a few. However, this product does not feature inbuilt fusing, so that users might install external fuses for protection.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | 16 discrete points, 12/24 volts DC Positive logic output module for Series 90-30 PLCs |
| Part Number | IC693MDL740 |
| Number of I/O Points | 16 |
| Outputs per Module | 2, eight outputs each |
| Rated voltage | 12/24 Volts DC |
| Output Voltage Range | 12 to 24 volts DC (+20%, –15%) |
| Isolation | 1500 Volts between field side and logic side 500 Volts between groups |
| Output Current | 0.5 Amperes maximum per point, 2 Amperes maximum per common |
| Inrush Current | 4.78 Amperes for 10 milliseconds |
| Output Voltage Drop | 1 Volt maximum |
| Off-State Leakage | 1 mA maximum |
| On Response Time | 2 milliseconds, maximum |
| Off Response Time | 2 milliseconds, maximum |
| Internal Power Consumption | 110 mA (maximum) from +5V bus on backplane |
| Weight | 290 g (0.65 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL740?
Answer: Yes. We offer repairs for the IC693MDL740 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL740?
Answer: If you buy the IC693MDL740 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL740 online?
Answer: Yes. Automation Stop sells the IC693MDL740 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL740?
Answer: The IC693MDL740 is made by Emerson - GE Fanuc.
Question: What Brand is included with the IC693MDL740?
Answer: The Rockwell Automation IC693MDL740 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Inrush Current of the IC693MDL740?
Answer: The Inrush Current of the IC693MDL740 is 4.78 Amperes for 10 milliseconds.
Question: What Internal Power Consumption does the Allen Bradley IC693MDL740 have?
Answer: The IC693MDL740 has a Internal Power Consumption of 110 mA (maximum) from +5 volts bus on backplane.
Question: What Isolation does the Allen Bradley/Rockwell Automation IC693MDL740 have?
Answer: The Isolation of the Allen Bradley/Rockwell Automation IC693MDL740 is 1500 Volts between field side and logic side 500 Volts between groups.
Question: What is the Number of input/output Points of the Rockwell Automation IC693MDL740?
Answer: The Number of input/output Points of the Rockwell Automation IC693MDL740 is 16.
Question: What is the Off Response Time of the IC693MDL740?
Answer: The IC693MDL740 has a Off Response Time of 2 milliseconds, maximum.
Question: What Off-State Leakage does the IC693MDL740 have?
Answer: The Allen Bradley/Rockwell Automation IC693MDL740 has a Off-State Leakage of 1 mA maximum.
Question: What On Response Time does the IC693MDL740 have?
Answer: The On Response Time of the IC693MDL740 is 2 milliseconds, maximum.
Question: What is the Output Current of the Rockwell-Automation IC693MDL740?
Answer: The Output Current of the Rockwell-Automation IC693MDL740 is 0.5 Amperes maximum per point, 2 Amperes maximum per common.
Question: What Output Voltage Drop does the IC693MDL740 have?
Answer: The IC693MDL740 has a Output Voltage Drop of 1 Volt maximum.
Question: What Output Voltage Range does the Rockwell-Automation IC693MDL740 have?
Answer: The Output Voltage Range of the Rockwell-Automation IC693MDL740 is 12 to 24 volts direct current (+20%, –15%).
Question: What is the Outputs per Module of the IC693MDL740?
Answer: The Outputs per Module of the Allen Bradley-Rockwell Automation IC693MDL740 is 2, eight outputs each.
Question: What is the unit Number of the IC693MDL740?
Answer: The unit Number of the Allen Bradley Automation IC693MDL740 is IC693MDL740.
Question: What is the Rated voltage of the IC693MDL740?
Answer: The Allen Bradley Automation IC693MDL740 has a Rated voltage of 12/24 Volts DC (direct current).
Question: What is the Weight of the Allen Bradley/Rockwell Automation IC693MDL740?
Answer: The IC693MDL740 has a Weight of 290 g (0.65 lb).
Series information for IC693MDL740
For additional information about IC693MDL740 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL740.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL740C | IC693MDL740 Series C, Rev C | Request a Quote |
| IC693MDL740E | IC693MDL740 Series E, Rev E | Request a Quote |
| IC693MDL740F | IC693MDL740 Series F, Rev F | Request a Quote |
| IC693MDL740G | IC693MDL740 Series G, Rev G | Request a Quote |
| IC693MDL740H | IC693MDL740 Series H, Rev H | Request a Quote |
| IC693MDL740K | IC693MDL740 Series K, Rev K | Request a Quote |
| IC693MDL740L | IC693MDL740 Series L, Rev L | Request a Quote |
Common Misspellings:
- IC693MDL74O
- ICG93MDL740
- ICG93MDL74O
- 1C693MDL740
- 1C693MDL74O
- 1CG93MDL740
- 1CG93MDL74O
