GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC693MDL732 |
Series: | Series 90-30 |
UPC: | 101068327358 |
Description:
The IC693MDL732 is a Digital I/O module. The module is designed to work with the GE Fanuc 90-30 PLCs. The rated voltage of the module is 12 / 24 Volts DC. The maximum input current of the module is 50 milliamps. The supply voltage of the IC693MDL732 is 5 Volts DC. It has 6 points terminals for the outputs.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
GE Fanuc's Discrete Input Module from the 90 - 30 series PLC supplies 16 Input points with one commonplace Power Input terminal. It requires an AC Power supply for convenient operation. Besides that, the module has LED signs at the pinnacle to provide every point's ON/OFF Status. As a result, users can track the status of the module's operation. Aside from the AC power supply requirements, the module has circuit wiring data, which is embedded on the surface closer to the inside of the module. Similarly, it has circuit identification data at the outside surface. The module has a voltage rating of 120 VAC at 50/60 Hz, 0 - 132 VAC at 50/60 Hz. Moreover, it has an input current rating of 12 milli-Amps, and a power score of 90 milli-Amps at five VDC. It has a maximum ON response time of 30 milliseconds and a maximum OFF response time of forty-five milli-seconds. The module is also compatible with input gadgets, such as pushbuttons, restriction switches, and electronic proximity switches. Furthermore, the Input/Output module provides the interface between the PLC controllers and external input devices, including proximity sensors, pushbuttons, switches, and BCD thumbwheels. Besides that, it also helps different voltage levels and current capacities, isolation categories, and response time rates meet users' applications. Hence, it is a versatile model by the manufacturer in the context of power modules. In brief, it is CE approved product and has an overall durable build quality and a good brand reputation by the GE Fanuc.
Question: Does Automation Stop offer repairs on the IC693MDL732?
Answer: Yes. We offer repairs for the IC693MDL732 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL732?
Answer: If you buy the IC693MDL732 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL732 online?
Answer: Yes. Automation Stop sells the IC693MDL732 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL732?
Answer: The IC693MDL732 is made by Emerson - GE Fanuc.
For additional information about IC693MDL732 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL732.
Revision Part # | Also Known As | Availability |
---|---|---|
IC693MDL732C | IC693MDL732 Series C, Rev C | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.