GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC693MDL655

✓ In Stock

IC693MDL655 Image 1 thumbnail
IC693MDL655 Image 2 thumbnail
IC693MDL655 Image 3 thumbnail
IC693MDL655 Image 4 thumbnail
IC693MDL655 Image 5 thumbnail
IC693MDL655 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC693MDL655
Series: Series 90-30
UPC: 755202969838

Description:

The GE Fanuc IC693MDL655 is a Positive/Negative Logic Input module with a 24-volt DC supply. The Series 90-30 Programmable Logic Controller is compatible with this module. There are 32 discrete input bits in total, separated into four sets of eight. Each group is isolated from the others and has a common ground between the eight points. The module's input points all run at a max of 30V.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC693MDL655 is a product type of Discrete I/O. The module is from GE Fanuc Automation's product family of 90-30. Since it is an I/O module of the 24V DC range, it is compatible with the programmable logic controllers(PLC). Hence, the module can handle power supplies for a vast range of automation components and CPU models. The power supply category of the module is DC only. The input voltage range of the IC693MDL655 ranges from 0V to 30V for the DC power supply. The inrush surge current rating of this digital input/output module is 7milliAmps. The module has a response time rate of 2ms for turning on similarly 2ms for the turning off. The IC693MDL655 comes with 32 points, which make up four groups; each group has eight inputs. And with a trigger voltage range from 11.5V to 30V. The isolation rated for this discrete I/O is 1500V among the module's field and logic sides. Similarly, the backplane isolation for this model is by the OptoCouplers, featuring 32-Bits digital input data. Because the module has 32 points, all of which represent four groups. As a result, the module can provide improved communication. The module also comes with LED indicators that help display status on the topmost of the product. The module extends 90-30 PLC features which help make interfacing compatibility between modules quicker. GE Fanuc is a famous automation manufacturer in the industry, and the IC693MDL655 discrete I/O module is one of their durable I/O modules, especially in the 90-30 series for PLC.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 32 discrete points, 24 volts DC Positive/Negative logic input module for Series 90-30 PLCs
Part Number IC693MDL655
Number of I/O Points 32
Input Groups 4, eight inputs each
Rated Voltage 24 Volts DC, Positive or Negative Logic
Input Voltage Range 0 to 30 Volts DC
Isolation 1500 Volts between field side and logic side 250 volts between groups
Input Current 7.0 mA
On-State Voltage 11.5 to 30 Volts DC
Off-State Voltage 0 to 5 Volts DC
On-State Current 3.2 mA (minimum)
Off-State Current 1.1 mA (maximum)
On Response Time 2 milliseconds maximum
Off Response Time 2 milliseconds maximum
Internal Power Consumption 195 mA (maximum) from +5V bus on backplane / 224 mA (typical) from isolated +24V bus on backplane
Weight 290 g (0.65 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC693MDL655?

Answer: Yes. We offer repairs for the IC693MDL655 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL655?

Answer: If you buy the IC693MDL655 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC693MDL655 online?

Answer: Yes. Automation Stop sells the IC693MDL655 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC693MDL655?

Answer: The IC693MDL655 is made by Emerson - GE Fanuc.


Question: What Brand is included with the Allen Bradley/Rockwell Automation IC693MDL655?

Answer: The IC693MDL655 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Input Current does the Rockwell-Automation IC693MDL655 have?

Answer: The Rockwell-Automation IC693MDL655 has a Input Current of 7.0 mA.


Question: What is the Input Groups of the Allen Bradley-Rockwell Automation IC693MDL655?

Answer: The Allen Bradley-Rockwell Automation IC693MDL655 has a Input Groups of 4, eight inputs each.


Question: What is the Input Voltage Range of the Allen-Bradley IC693MDL655?

Answer: The IC693MDL655 has a Input Voltage Range of 0 to 30 Volts DC.


Question: What Internal Power Consumption does the Allen Bradley/Rockwell Automation IC693MDL655 have?

Answer: The Internal Power Consumption of the Allen Bradley/Rockwell Automation IC693MDL655 is 195 mA (maximum) from +5 volts bus on backplane / 224 mA (typical) from isolated +5 volts bus on backplane.


Question: What Isolation does the IC693MDL655 have?

Answer: The Allen-Bradley IC693MDL655 has a Isolation of 1500 Volts between field side and logic side 250 volts between groups.


Question: What Number of input/output Points does the Allen Bradley Automation IC693MDL655 have?

Answer: The Allen Bradley Automation IC693MDL655 has a Number of input/output Points of 32.


Question: What is the Off Response Time of the IC693MDL655?

Answer: The Off Response Time of the IC693MDL655 is 2 milliseconds maximum.


Question: What is the Off-State Current of the Rockwell-Automation IC693MDL655?

Answer: The Off-State Current of the Rockwell-Automation IC693MDL655 is 1.1 mA (maximum).


Question: What is the Off-State Voltage of the IC693MDL655?

Answer: The Allen-Bradley IC693MDL655 has a Off-State Voltage of 0 to 5 Volts DC (direct current).


Question: What is the On Response Time of the IC693MDL655?

Answer: The Rockwell-Automation IC693MDL655 has a On Response Time of 2 milliseconds maximum.


Question: What is the On-State Current of the IC693MDL655?

Answer: The On-State Current of the Allen-Bradley IC693MDL655 is 3.2 mA (minimum).


Question: What On-State Voltage does the IC693MDL655 have?

Answer: The Rockwell Automation IC693MDL655 has a On-State Voltage of 11.5 to 30 Volts direct current.


Question: What unit Number does the IC693MDL655 have?

Answer: The IC693MDL655 has a unit Number of IC693MDL655.


Question: What is the Rated Voltage of the IC693MDL655?

Answer: The Rated Voltage of the Allen Bradley IC693MDL655 is 24 Volts DC (direct current), Positive or Negative Logic.


Question: What is the Weight of the IC693MDL655?

Answer: The Weight of the Allen-Bradley IC693MDL655 is 290 g (0.65 lb).


Series information for IC693MDL655

For additional information about IC693MDL655 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL655.

Revision Part # Also Known As Availability
IC693MDL655B IC693MDL655 Series B, Rev B Request a Quote
IC693MDL655C IC693MDL655 Series C, Rev C Request a Quote
IC693MDL655D IC693MDL655 Series D, Rev D Request a Quote
IC693MDL655E IC693MDL655 Series E, Rev E Request a Quote
IC693MDL655F IC693MDL655 Series F, Rev F Request a Quote
IC693MDL655G IC693MDL655 Series G, Rev G Request a Quote
IC693MDL655H IC693MDL655 Series H, Rev H Request a Quote
IC693MDL655K IC693MDL655 Series K, Rev K Request a Quote
IC693MDL655L IC693MDL655 Series L, Rev L Request a Quote

Common Misspellings:

  • IC693MDL65S
  • IC693MDL6S5
  • IC693MDL6SS
  • IC693MDLG55
  • IC693MDLG5S
  • IC693MDLGS5
  • IC693MDLGSS
  • ICG93MDL655
  • ICG93MDL65S
  • ICG93MDL6S5
  • ICG93MDL6SS
  • ICG93MDLG55
  • ICG93MDLG5S
  • ICG93MDLGS5
  • ICG93MDLGSS
  • 1C693MDL655
  • 1C693MDL65S
  • 1C693MDL6S5
  • 1C693MDL6SS
  • 1C693MDLG55
  • 1C693MDLG5S
  • 1C693MDLGS5
  • 1C693MDLGSS
  • 1CG93MDL655
  • 1CG93MDL65S
  • 1CG93MDL6S5
  • 1CG93MDL6SS
  • 1CG93MDLG55
  • 1CG93MDLG5S
  • 1CG93MDLGS5
  • 1CG93MDLGSS

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP