GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL645 |
| Series: | Series 90-30 |
| UPC: | 290046192207 |
Description:
The IC693MDL645, which is manufactured and designed by GE Fanuc, belongs to the 90-30 series of programmable logic controllers. This module contains 16 input channels, and it is a positive/negative logic input module. This module is used to interface input devices, such as pushbuttons and other similar devices. The input voltage ranges between 0 to 30 volts direct current (DC), where for the ON-state, the voltage rating is 11.5 to 30 volts DC, and for the OFF-state, the voltage rating is 0 to 5 volts DC.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC693MDL645, which was designed and produced by GE Fanuc, belongs to the 90 and 30 series of programmable logic controllers. It contains sixteen (16) input channels, and it is a positive/negative logic input module. The input voltage ranges from 0 to 30 volts direct current (DC), where for the ON-state, the voltage rating is 11.5 to 30 volts direct current (DC) and for OFF-state, the voltage rating is 0 to 5 volts direct current (DC). This GE Fanuc module has positive logic or negative logic feature only and can be used to interface input devices such as pushbuttons and other similar devices. Additionally, the input current for this module is seven (7) milliamperes. The field side and logic side isolation are rated at 1500 volts. If operators need to check the energy level of channels or if they need to troubleshoot, light emitting diode (LED) indicators are present on the top of the module and if needed, the wiring and current identification information is also present on an insert that is located between the inner and outer surface of the hinged door. Therefore, it is important to open the hinged door and follow all the necessary information. This module created by GE Fanuc is also a low voltage module, which is clearly indicated by the outside edge of the insert, which is color coded blue. Furthermore, this module can be installed in any input output slot of a five (5) to ten (10) slot base plate of any PLC system.
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL645?
Answer: Yes. We offer repairs for the IC693MDL645 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL645?
Answer: If you buy the IC693MDL645 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL645 online?
Answer: Yes. Automation Stop sells the IC693MDL645 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL645?
Answer: The IC693MDL645 is made by Emerson - GE Fanuc.
Series information for IC693MDL645
For additional information about IC693MDL645 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL645.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL645A | IC693MDL645 Series A, Rev A | Request a Quote |
| IC693MDL645B | IC693MDL645 Series B, Rev B | Request a Quote |
| IC693MDL645C | IC693MDL645 Series C, Rev C | Request a Quote |
| IC693MDL645D | IC693MDL645 Series D, Rev D | Request a Quote |
| IC693MDL645E | IC693MDL645 Series E, Rev E | Request a Quote |
| IC693MDL645F | IC693MDL645 Series F, Rev F | Request a Quote |
| IC693MDL645G | IC693MDL645 Series G, Rev G | Request a Quote |
| IC693MDL645H | IC693MDL645 Series H, Rev H | Request a Quote |
| IC693MDL645J | IC693MDL645 Series J, Rev J | Request a Quote |
| IC693MDL645K | IC693MDL645 Series K, Rev K | Request a Quote |
Common Misspellings:
- IC693MDL64S
- IC693MDLG45
- IC693MDLG4S
- ICG93MDL645
- ICG93MDL64S
- ICG93MDLG45
- ICG93MDLG4S
- 1C693MDL645
- 1C693MDL64S
- 1C693MDLG45
- 1C693MDLG4S
- 1CG93MDL645
- 1CG93MDL64S
- 1CG93MDLG45
- 1CG93MDLG4S
