GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC693MDL390 |
| Series: | Series 90-30 |
| UPC: | 700576459867 |
Description:
The GE Fanuc Emerson IC693MDL390 is a discrete output module that includes five isolated discrete output points that support a voltage rating range from 85 volts AC to 264 volts AC and an output current of 2 amperes. Each output has a separate common power terminal. The outputs are labeled with green LED indicators to show the status of outputs. The IC693MDL390 output module weighs approximately 410 grams (0.90 pounds) while shipping.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC693MDL390 is a discrete output module that includes five isolated discrete output points that support a voltage range from 85 volts AC to 264 volts AC and an output current of 2 amperes. Each output has a separate common power terminal. The outputs are labeled with green LED indicators to show the status of outputs. The module employs the backplane optical isolation offered by optocouplers to provide electrical isolation of 1500 volts between logic and field sides and 500 volts between outputs. This device can be easily mounted in an I/O slot of either 5 or 10-slot baseplate and at any input or output slots of the 90-30 PLC system. The IC693MDL390 offers a high level of inrush current and is used in many industrial applications such as solenoids and motor starters.
The IC693MDL390 can be electrically supplied either by the operator or from 120 volts AC to 240 volts AC power supply. This module draws a current of 110 milliamperes at a voltage of +5 volts DC on the backplane. The outputs are equipped with 3 amperes fuses and include an RC snubber to prevent the power line electric transient noise. These fuses can be shown by the “F” red LED indicator. The outputs draw a maximum current of 2 amperes per point and a maximum current of 5 amperes per module. The output module includes a hinged door that supports an insert in between the outside and the inside surfaces. The outside left edge of the insert is red-colored to show that this device is a high-rating voltage module. The hinged door inside area includes the wiring details of the circuit and the outside area contains the identification detail regarding the circuit. The IC693MDL390 output module weighs approximately 410 grams (0.90 pounds) while shipping.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | 90-30 |
| Part Number | IC693MDL390 |
| Description | Output module |
| Number of I/O points | 5 |
| Outputs per module | 5 isolated output points, each with a separate common |
| Rated voltage | 120/240 volts AC |
| Output voltage range | 85 to 264 volts AC, 50/60 Hz |
| Isolation | 1500 volts between field side and logic side 500 volts between each output |
| Output current | 2 amp maximum per point, 4 amps maximum per group |
| Inrush current | 25 amps maximum for one cycle |
| Output voltage drop | 1.5 volts maximum |
| Minimum load current | 100 mA |
| Output leakage current | 3 mA maximum at 120 volts AC, 6 mA maximum at 240 volts AC |
| On response time | 1 ms maximum |
| Off response time | 1/2 cycle maximum |
| Internal power consumption | 110 mA (all outputs on) from 5 volt bus on backplane |
| Weight | 410 g (0.90 lb.) |
FAQ
Question: Does Automation Stop offer repairs on the IC693MDL390?
Answer: Yes. We offer repairs for the IC693MDL390 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC693MDL390?
Answer: If you buy the IC693MDL390 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC693MDL390 online?
Answer: Yes. Automation Stop sells the IC693MDL390 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC693MDL390?
Answer: The IC693MDL390 is made by Emerson - GE Fanuc.
Question: What Brand is included with the Rockwell Automation IC693MDL390?
Answer: The IC693MDL390 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What Description is included with the Allen Bradley-Rockwell Automation IC693MDL390?
Answer: The Allen Bradley-Rockwell Automation IC693MDL390 has a Output module Description.
Question: What Inrush current does the IC693MDL390 have?
Answer: The IC693MDL390 has a Inrush current of 25 amperes maximum for one cycle.
Question: What is the Internal power consumption of the IC693MDL390?
Answer: The Allen Bradley Automation IC693MDL390 has a Internal power consumption of 110 mA (all outputs on) from 5 volt bus on backplane.
Question: What is the Isolation of the Allen Bradley-Rockwell Automation IC693MDL390?
Answer: The Isolation of the Allen Bradley-Rockwell Automation IC693MDL390 is 1500 volts between field side and logic side 500 volts between each output.
Question: What Minimum load current does the IC693MDL390 have?
Answer: The Rockwell Automation IC693MDL390 has a Minimum load current of 100 mA.
Question: What Number of input/output points does the IC693MDL390 have?
Answer: The Number of input/output points of the IC693MDL390 is 5.
Question: What Off response time does the Allen Bradley/Rockwell Automation IC693MDL390 have?
Answer: The Allen Bradley/Rockwell Automation IC693MDL390 has a Off response time of 1/2 cycle maximum.
Question: What is the On response time of the IC693MDL390?
Answer: The IC693MDL390 has a On response time of 1 ms maximum.
Question: What is the Output current of the IC693MDL390?
Answer: The Allen Bradley IC693MDL390 has a Output current of 2 amp maximum per point, 4 amperes maximum per group.
Question: What Output leakage current does the IC693MDL390 have?
Answer: The Allen Bradley/Rockwell Automation IC693MDL390 has a Output leakage current of 3 mA maximum at 120 volts alternating current (AC), 6 mA maximum at 240 volts alternating current (AC).
Question: What Output voltage drop does the IC693MDL390 have?
Answer: The Output voltage drop of the IC693MDL390 is 1.5 volts maximum.
Question: What is the Output voltage range of the IC693MDL390?
Answer: The IC693MDL390 has a Output voltage range of 85 to 264 volts alternating current (AC), 50/60 Hz.
Question: What Outputs per module does the Allen-Bradley IC693MDL390 have?
Answer: The Outputs per module of the IC693MDL390 is 5 isolated output points, each with a separate common.
Question: What is the component Number of the IC693MDL390?
Answer: The Allen Bradley IC693MDL390 has a component Number of IC693MDL390.
Question: What is the Rated voltage of the Allen Bradley IC693MDL390?
Answer: The Allen Bradley IC693MDL390 has a Rated voltage of 120/240 volts alternating current (AC).
Question: What is the Weight of the IC693MDL390?
Answer: The Allen Bradley IC693MDL390 has a Weight of 410 g (0.90 lb.).
Series information for IC693MDL390
For additional information about IC693MDL390 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC693MDL390.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC693MDL390A | IC693MDL390 Series A, Rev A | Request a Quote |
| IC693MDL390C | IC693MDL390 Series C, Rev C | Request a Quote |
| IC693MDL390E | IC693MDL390 Series E, Rev E | Request a Quote |
| IC693MDL390F | IC693MDL390 Series F, Rev F | Request a Quote |
Common Misspellings:
- IC693MDL39O
- ICG93MDL390
- ICG93MDL39O
- 1C693MDL390
- 1C693MDL39O
- 1CG93MDL390
- 1CG93MDL39O
