GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC698RMX016

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC698RMX016
Series: RX7i
UPC: 470821724278

Description:

Part number IC698RMX016 is a redundancy exchange module (RMX) that belongs to the RX7i PacSystem series of products. This device was designed and manufactured by GE Fanuc. This product has 16 megabytes of SDRAM. The operational voltage of this device's power supply is rated at 5 volts direct current (DC). Additionally, this device requires a rated current of 1.8 amperes. The GE Fanuc IC698RMX016 has physical dimensions that measure 6.299 inches x 9.187 inches (width x height).


Key Features:

  • comes with 16 mb sdram memory
  • operates at a voltage of 5 volts dc

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC698RMX016 is an RX7i PacSystem Redundant Memory Exchange module. It features a user memory of 16 MB SDRAM. The operational voltage of the power supply is 5 volts direct current. This device requires a current of 1.8 amperes. An IEC 61754-20-compliant LC-type fiber optic connector and a ceramic zirconium ferrule are included in the kit. Zero-point-three-five (0.35) dB is the maximum insertion loss on this PacSystem. Negative thirty (-30) dB is the return loss on this controller. This GE Fanuc device is capable of being operated in a temperature range of -20 to +85 degrees Celsius.

To complete the installation, check that you have the following items: a PacSystem CPU (Ed. 2.00 or later), a PacSystem CPU RX7i rack with dedicated power supply, and one PC-compatible computer that comes preinstalled with the CIMPLICITY Machine Ed. software. You will also need Logic Developer (Ed. 4.5 or later) configuration software and other essential components. Note that RX7i systems with more than one Memory Xchange module must be mounted in a conductive metal enclosure, or equivalent, to meet radiated emission standards. Only RX7i Rack 0 should have memory modules loaded (main). RMX interfaces are recommended to be put in slots 3 & 4 of the main rack. This gives the VME request interrupt priority to the RMX interface. Although such a setup is recommended, RMX modules need not be placed in slots 4 and 3. The IC698RMX016 initially boots into an unconfigured stage, with the optical transmitter turned off. It will be unable to connect to a network until the RX7i CPU provides it with a configuration.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC698RMX016?

Answer: Yes. We offer repairs for the IC698RMX016 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC698RMX016?

Answer: If you buy the IC698RMX016 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC698RMX016 online?

Answer: Yes. Automation Stop sells the IC698RMX016 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC698RMX016?

Answer: The IC698RMX016 is made by Emerson - GE Fanuc.


Series information for IC698RMX016

For additional information about IC698RMX016 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC698RMX016.

Revision Part # Also Known As Availability
IC698RMX016-AA IC698RMX016 Series AA, Rev AA Request a Quote
IC698RMX016-BA IC698RMX016 Series BA, Rev BA Request a Quote
IC698RMX016-CB IC698RMX016 Series CB, Rev CB Request a Quote
IC698RMX016-DC IC698RMX016 Series DC, Rev DC Request a Quote
IC698RMX016-ED IC698RMX016 Series ED, Rev ED Request a Quote

Common Misspellings:

  • IC698RMX01G
  • IC698RMX0I6
  • IC698RMX0IG
  • IC698RMXO16
  • IC698RMXO1G
  • IC698RMXOI6
  • IC698RMXOIG
  • IC69BRMX016
  • IC69BRMX01G
  • IC69BRMX0I6
  • IC69BRMX0IG
  • IC69BRMXO16
  • IC69BRMXO1G
  • IC69BRMXOI6
  • IC69BRMXOIG
  • ICG98RMX016
  • ICG98RMX01G
  • ICG98RMX0I6
  • ICG98RMX0IG
  • ICG98RMXO16
  • ICG98RMXO1G
  • ICG98RMXOI6
  • ICG98RMXOIG
  • ICG9BRMX016
  • ICG9BRMX01G
  • ICG9BRMX0I6
  • ICG9BRMX0IG
  • ICG9BRMXO16
  • ICG9BRMXO1G
  • ICG9BRMXOI6
  • ICG9BRMXOIG
  • 1C698RMX016
  • 1C698RMX01G
  • 1C698RMX0I6
  • 1C698RMX0IG
  • 1C698RMXO16
  • 1C698RMXO1G
  • 1C698RMXOI6
  • 1C698RMXOIG
  • 1C69BRMX016
  • 1C69BRMX01G
  • 1C69BRMX0I6
  • 1C69BRMX0IG
  • 1C69BRMXO16
  • 1C69BRMXO1G
  • 1C69BRMXOI6
  • 1C69BRMXOIG
  • 1CG98RMX016
  • 1CG98RMX01G
  • 1CG98RMX0I6
  • 1CG98RMX0IG
  • 1CG98RMXO16
  • 1CG98RMXO1G
  • 1CG98RMXOI6
  • 1CG98RMXOIG
  • 1CG9BRMX016
  • 1CG9BRMX01G
  • 1CG9BRMX0I6
  • 1CG9BRMX0IG
  • 1CG9BRMXO16
  • 1CG9BRMXO1G
  • 1CG9BRMXOI6
  • 1CG9BRMXOIG

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP