GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC698CRE020

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC698CRE020
Series: RX7i
UPC: 176789445254

Description:

The GE Fanuc Emerson IC698CRE020 is a CPU that can be employed for PACSystems* RX7i. The IC698CRE020 offers a speed of 700 Megahertz and high calculation efficiency employing an Intel Pentium III microprocessor. The IC698CRE020 includes LED indicators to show the redundancy memory exchange module status. The IC698CRE020 includes a battery-backed memory of ten (10) megabytes.


Key Features:

  • utilizes an operating temperature of 32 to 140 degrees fahrenheit

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC698CRE020 is a CPU that can be employed for PACSystems* RX7i. The IC698CRE020 offers a speed of 700 Megahertz and high calculation efficiency employing an Intel Pentium III microprocessor with an HSB redundancy for critical applications. The IC698CRE020 can be configured using C, ladder diagram, FBD, and ST programming languages over either RS-232 or RS-485 serial port. The IC698CRE020 includes LED indicators to show the redundancy memory exchange module status. The IC698CRE020 includes a battery-backed memory of ten (10) megabytes and ten (10) megabytes of flash memory. The IC698CRE020 offers 32-kilo discrete inputs and outputs. The IC698CRE020 provides 0.14 microseconds per 1000 boolean function. The IC698CRE020 supports RS-485, RS-232, and Ethernet serial communication ports. The IC698CRE020 Ethernet port offers a data rate of either ten (10) megabytes per second or one hundred (100) megabytes per second.

This CPU has configurable data and program memory. The IC698CRE020 supports floating-point calculations, error detecting, and a correction feature. The IC698CRE020 support serial I/O, SNP, and Modbus RTU slave protocols. The IC698CRE020 contains a battery-backed memory to maintain data, program memory, and calendar clock operation; it requires a current of 4.5 Amperes at a voltage of 5 Volts DC, 42 milliamperes at 12 Volts DC, or 8 milliamperes at -12 Volts DC. The IC698CRE020 includes flash memory to store and save CPU firmware and user data during the upgrading process between PC and the serial port. The IC698CRE020 weighs approximately 790 grams (1.74 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 700 MHz, Pentium III microprocessor with redundancy CPU for PACSystems* RX7i
Part Number IC698CRE020
Product Type Redundancy CPU
Processor Speed 700 MHz
Microprocessor Intel Pentium III microprocessor
CPU Memory 10 Mbyte
Number of Points 32Kbits discrete inputs and outputs
Battery-Backed User Memory 10 Mbytes
Supported Programming Ladder Diagram, C, Structured Text, and Function Block Diagram
Floating Point Yes
Serial Ports 3
Serial Protocols Modbus RTU Slave, SNP, Serial I/O
Embedded Comms RS-232, RS-486. Ethernet interface
Power Requirements +5 VDC: 4.5 Amps nominal / +12 VDC: 0.042 Amps nominal / -12 VDC: 0.008 Amps nominal
Operating Temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Weight 790 g (1.74 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC698CRE020?

Answer: Yes. We offer repairs for the IC698CRE020 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC698CRE020?

Answer: If you buy the IC698CRE020 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC698CRE020 online?

Answer: Yes. Automation Stop sells the IC698CRE020 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC698CRE020?

Answer: The IC698CRE020 is made by Emerson - GE Fanuc.


Question: What is the Battery-Backed User random-access memory (RAM) of the IC698CRE020?

Answer: The Battery-Backed User random-access memory (RAM) of the IC698CRE020 is 10 Mbytes.


Question: What Brand does the Allen Bradley-Rockwell Automation IC698CRE020 have?

Answer: The Allen Bradley-Rockwell Automation IC698CRE020 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the central processing unit (CPU) random-access memory (RAM) of the IC698CRE020?

Answer: The central processing unit (CPU) random-access memory (RAM) of the Rockwell Automation IC698CRE020 is 10 Mbyte.


Question: What is the Embedded Comms of the IC698CRE020?

Answer: The Allen Bradley IC698CRE020 has a Embedded Comms of RS-232, RS-486. Ethernet interface.


Question: Does the IC698CRE020 have a Floating Point?

Answer: Yes.


Question: What Microprocessor is included with the Allen Bradley Automation IC698CRE020?

Answer: The Allen Bradley Automation IC698CRE020 has a Intel Pentium III microprocessor Microprocessor .


Question: What is the Number of Points of the IC698CRE020?

Answer: The Allen Bradley-Rockwell Automation IC698CRE020 has a Number of Points of 32Kbits discrete inputs and outputs.


Question: What is the Operating Temperature of the Allen Bradley/Rockwell Automation IC698CRE020?

Answer: The Allen Bradley/Rockwell Automation IC698CRE020 has a Operating Temperature of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).


Question: What is the component Number of the IC698CRE020?

Answer: The IC698CRE020 has a part Number of IC698CRE020.


Question: What is the Power Requirements of the IC698CRE020?

Answer: The Power Requirements of the IC698CRE020 is +5 VDC: 4.5 amperes nominal / +12 VDC: 0.042 amperes nominal / -12 VDC: 0.008 amperes nominal.


Question: What is the Processor Speed of the Allen Bradley IC698CRE020?

Answer: The IC698CRE020 has a Processor Speed of 700 gigahertz.


Question: What Product Type is included with the Allen-Bradley IC698CRE020?

Answer: The IC698CRE020 has a Redundancy central processing unit (CPU) Product Type.


Question: What is the Serial Ports of the Allen Bradley/Rockwell Automation IC698CRE020?

Answer: The IC698CRE020 has a Serial Ports of 3.


Question: What kind of Serial Protocols does the Rockwell Automation IC698CRE020 have?

Answer: The IC698CRE020 includes Modbus RTU Slave, SNP, Serial input/output for its Serial Protocols.


Question: What Supported Programming is included with the Rockwell Automation IC698CRE020?

Answer: The Rockwell Automation IC698CRE020 has a Ladder Diagram, C, Structured Text, and Function Block Diagram Supported Programming.


Question: What Weight does the Rockwell Automation IC698CRE020 have?

Answer: The Rockwell Automation IC698CRE020 has a Weight of 790 g (1.74 lb).


Series information for IC698CRE020

For additional information about IC698CRE020 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC698CRE020.

Revision Part # Also Known As Availability
IC698CRE020-AA IC698CRE020 Series AA, Rev AA Request a Quote
IC698CRE020-AB IC698CRE020 Series AB, Rev AB Request a Quote
IC698CRE020-ED IC698CRE020 Series ED, Rev ED Request a Quote
IC698CRE020-FE IC698CRE020 Series FE, Rev FE Request a Quote
IC698CRE020-JT IC698CRE020 Series JT, Rev JT Request a Quote

Common Misspellings:

  • IC698CRE02O
  • IC698CREO20
  • IC698CREO2O
  • IC69BCRE020
  • IC69BCRE02O
  • IC69BCREO20
  • IC69BCREO2O
  • ICG98CRE020
  • ICG98CRE02O
  • ICG98CREO20
  • ICG98CREO2O
  • ICG9BCRE020
  • ICG9BCRE02O
  • ICG9BCREO20
  • ICG9BCREO2O
  • 1C698CRE020
  • 1C698CRE02O
  • 1C698CREO20
  • 1C698CREO2O
  • 1C69BCRE020
  • 1C69BCRE02O
  • 1C69BCREO20
  • 1C69BCREO2O
  • 1CG98CRE020
  • 1CG98CRE02O
  • 1CG98CREO20
  • 1CG98CREO2O
  • 1CG9BCRE020
  • 1CG9BCRE02O
  • 1CG9BCREO20
  • 1CG9BCREO2O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP