GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC698CPE010

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC698CPE010
Series: RX7i
UPC: 800214679296

Description:

The GE Fanuc IC698CPE010 is a central processing unit. It is designed and manufactured by GE Fanuc and belongs to the PACSystems RX7i series. It is mostly used for controlling industrial machinery. Furthermore, it is also used for real-time material processing. Thanks to the built-in VME64 connection backplane, this module is able to communicate with other devices and units. You need a Cat5 cable for connection. The IC698CPE010 comes with 10 MB of RAM.


Key Features:

  • contains 3.4 amps as current rating

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC698CPE010 is a Central Processing Unit by GE Fanuc. It is from the RX7i series and can control the industrial machinery in real-time. The CPU communicates with other modules and devices through the VME64 connection backplane. It consists of a 300 Megahertz Celeron microprocessor that allows users to perform floating-point calculations. Each of its Boolean function has a standard speed of 0.33 milliseconds per coil. The key features of the CPU include 2x ethernet ports, 3x embedded serial ports, a test edit mode, supports bit-in-word reference, supports symbolic variable, and a data monitoring feature. The IC698CPE010 has a RAM memory of 10 Megabytes for storing programming information and data. A CMOS battery sustains this memory in case of power loss. It also includes 10 Megabytes of nonvolatile flash memory (NVRAM). The operating system firmware is stored in this flash memory. A user can update the firmware of the device without taking out the memory or replacing its EPROMs.

The IC698CPE010 can be operated by two means: using the three-position switch to run or stop the device, and connecting it to a computer and then running the appropriate software. The device can be connected to a computer using the Ethernet or serial port. To connect the device with the computer using an Ethernet port, the user will require a Cat5 cable and IP addressing. To connect using the serial port, use an SNP protocol. To program and configure the device, use a Proficy Machine Edition PLC-Logic Developer software on the computer. Data configuration in the device is secured with a password.

The GE Fanuc IC698CPE010 is a central processing unit that comes with a built-in VME64 connection interface that is mounted on the rack. This GE Fanuc CPU is equipped with a 300 MHz Celeron microprocessor. Thanks to this advanced chip, this central processing unit is capable of performing floating-point calculations. 0.33ms per coil is the standard execution speed of each Boolean function. The module comes with several other advanced features including, two Ethernet ports, three embedded serial ports, symbolic variable support, bit-in-word reference support, data monitoring over the web, and a test edit mode. As far as memory is concerned, the GE Fanuc IC698CPE010 central processing unit comes with 10 MB of RAM. The RAM is primarily used for storing data and programming information. The RAM is backed up using a CMOS battery. Along with the RAM, this module also hosts a non-volatile flash memory of 10 MB. The flash memory is primarily used to store operating system firmware data. This module can be upgraded without having to dismantle the device. Users can use this module in two ways. First, users can resort to using the three-position run/stop switch. The second option is connecting this module to a device and operating it using a computer. This GE IC698CPE010 central processing unit can be connected to the internet via serial or Ethernet ports. However, if users opt-in with using the Ethernet port, they must provide the port with an IP address. Furthermore, for an Ethernet connection, this cable requires a Cat5 cable. 

Technical Specifications

Processing Speed 300 Megahertz
CPU Memory 10 Megabytes
Program Storage Up to 10 Megabytes of battery-backed RAM and 10 Megabytes of nonvolatile flash memory
Power requirements : +5V DC for 3.2 Ampere nominal, +12V DC for 0.042 Ampere nominal, and -12V DC for 0.008 Amperes nominal
Serial Port 3
Floating Point Yes
Embedded Communications RS-486, RS-232, and Ethernet interface
Serial Protocols SNP, Modbus RTU Slave, and Serial I/O
Operating temperature 0 to 60 degrees Celsius with fan tray
Clock accuracy 9 seconds per day, maximum
Ethernet port Embedded 10/100 Mbps half/full-duplex interface
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC698CPE010?

Answer: Yes. We offer repairs for the IC698CPE010 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC698CPE010?

Answer: If you buy the IC698CPE010 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC698CPE010 online?

Answer: Yes. Automation Stop sells the IC698CPE010 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC698CPE010?

Answer: The IC698CPE010 is made by Emerson - GE Fanuc.


Question: What is the Clock accuracy of the Allen-Bradley IC698CPE010?

Answer: The Clock accuracy of the IC698CPE010 is 9 seconds per day, maximum.


Question: What is the central processing unit (CPU) random-access memory (RAM) of the IC698CPE010?

Answer: The IC698CPE010 has a central processing unit (CPU) random-access memory (RAM) of 10 Megabytes.


Question: What is the Embedded Communications of the Rockwell Automation IC698CPE010?

Answer: The IC698CPE010 has a Embedded Communications of RS-486, RS-232, and Ethernet interface.


Question: What is the Ethernet port of the Allen-Bradley IC698CPE010?

Answer: The IC698CPE010 has a Ethernet port of Embedded 10/100 Mbps half/full-duplex interface.


Question: Does the Allen Bradley IC698CPE010 have a Floating Point?

Answer: Yes.


Question: What is the Operating temperature of the Allen Bradley IC698CPE010?

Answer: The Operating temperature of the Allen Bradley IC698CPE010 is 0 to 60 degrees Celsius with fan tray .


Question: What Power requirements does the Allen Bradley/Rockwell Automation IC698CPE010 have?

Answer: The IC698CPE010 has a Power requirements of : +5 volts direct current (DC) for 3.2 Ampere nominal, +5 volts direct current (DC) for 0.042 Ampere nominal, and -5 volts direct current (DC) for 0.008 Amperes nominal.


Question: What Processing Speed does the IC698CPE010 have?

Answer: The Processing Speed of the Allen Bradley/Rockwell Automation IC698CPE010 is 300 Megahertz.


Question: What is the Program Storage of the Allen Bradley-Rockwell Automation IC698CPE010?

Answer: The Allen Bradley-Rockwell Automation IC698CPE010 has a Program Storage of Up to 10 Megabytes of battery-backed RAM (random-access random-access memory (RAM)) and 10 Megabytes of nonvolatile flash random-access memory (RAM).


Question: What is the Serial Port of the IC698CPE010?

Answer: The Serial Port of the Allen Bradley-Rockwell Automation IC698CPE010 is 3.


Question: What kind of Serial Protocols does the IC698CPE010 have?

Answer: The Allen Bradley-Rockwell Automation IC698CPE010 has Serial Protocols SNP, Modbus RTU Slave, and Serial input/output.


Series information for IC698CPE010

For additional information about IC698CPE010 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC698CPE010.

Revision Part # Also Known As Availability
IC698CPE010-AA IC698CPE010 Series AA, Rev AA Request a Quote
IC698CPE010-JS IC698CPE010 Series JS, Rev JS Request a Quote
IC698CPE010-JV IC698CPE010 Series JV, Rev JV Request a Quote

Common Misspellings:

  • IC698CPE01O
  • IC698CPE0I0
  • IC698CPE0IO
  • IC698CPEO10
  • IC698CPEO1O
  • IC698CPEOI0
  • IC698CPEOIO
  • IC69BCPE010
  • IC69BCPE01O
  • IC69BCPE0I0
  • IC69BCPE0IO
  • IC69BCPEO10
  • IC69BCPEO1O
  • IC69BCPEOI0
  • IC69BCPEOIO
  • ICG98CPE010
  • ICG98CPE01O
  • ICG98CPE0I0
  • ICG98CPE0IO
  • ICG98CPEO10
  • ICG98CPEO1O
  • ICG98CPEOI0
  • ICG98CPEOIO
  • ICG9BCPE010
  • ICG9BCPE01O
  • ICG9BCPE0I0
  • ICG9BCPE0IO
  • ICG9BCPEO10
  • ICG9BCPEO1O
  • ICG9BCPEOI0
  • ICG9BCPEOIO
  • 1C698CPE010
  • 1C698CPE01O
  • 1C698CPE0I0
  • 1C698CPE0IO
  • 1C698CPEO10
  • 1C698CPEO1O
  • 1C698CPEOI0
  • 1C698CPEOIO
  • 1C69BCPE010
  • 1C69BCPE01O
  • 1C69BCPE0I0
  • 1C69BCPE0IO
  • 1C69BCPEO10
  • 1C69BCPEO1O
  • 1C69BCPEOI0
  • 1C69BCPEOIO
  • 1CG98CPE010
  • 1CG98CPE01O
  • 1CG98CPE0I0
  • 1CG98CPE0IO
  • 1CG98CPEO10
  • 1CG98CPEO1O
  • 1CG98CPEOI0
  • 1CG98CPEOIO
  • 1CG9BCPE010
  • 1CG9BCPE01O
  • 1CG9BCPE0I0
  • 1CG9BCPE0IO
  • 1CG9BCPEO10
  • 1CG9BCPEO1O
  • 1CG9BCPEOI0
  • 1CG9BCPEOIO

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP