GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC687BEM731

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC687BEM731
Series: RX7i
UPC: 799705792814

Description:

The GE Fanuc Emerson IC687BEM731 is a Genius bus controller that offers communication of thirty-one (31) devices to either a PACSystems RX7i or Series 90-70 system. This unit reserves in a backplane one single slot. The IC687BEM731 can be employed in many standard and redundancy applications. The bus controller draws a current of 1.3 Amperes at a bus voltage of 5 Volts DC. The IC687BEM731 supports GBC communication and datagrams.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC687BEM731 is a Genius bus controller that offers communication of thirty-one (31) devices to either a PACSystems RX7i or Series 90-70 system. This unit reserves in a backplane one single slot. The IC687BEM731 can be employed in many standard and redundancy applications and is compatible with many devices and PLCs. This controller has three (3) LED indicators on the faceplate to show the current status. The IC687BEM731 bus controller is mainly employed to control both the temperature and the voltage of devices. This controller contains a 9-pin HHM connector under LED indicators on the faceplate to connect a Genius hand-held monitor. The unit includes also a serial bus connector to connect with a serial bus.

The IC687BEM731 supports GBC communication and datagrams. The bus controller draws a current of 1.3 Amperes at a bus voltage of 5 Volts DC. This unit offers many configurable baud rates such as 6.8 kilobaud, 153.6 kilobaud, and 38.4 kilobaud with a maximum bus distance of 2286 meters (7500 feet). The IC687BEM731 supports many values of termination resistors at both ends of the bus cable that are: 75 ohms, 100 ohms, 120 ohms, and 150 ohms. This controller supports either shielded twisted pair cable or daisy-chain connections. The controller is conceived with the FSK modulation technology with a supported frequency range from zerp (0) kilohertz to 460.8 kilohertz. The IC687BEM731 weighs approximately 450 grams (0.99 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Rx7i PACsystem
Part Number IC687BEM731
Description Genius bus controller
Voltage Rating 5 Volts DC
Current Rating 1.3 Amperes
Space Single-slot
Redundancy Supported
Built-in Serial Ports 1 (Handheld monitor port)
Devices on the Bus 32 devices at 153.6 Kbaud standard, 153.6 Kbaud extended, or 76.8 Kbaud. 16 devices at 38.4 Kbaud.
Maximum Bus Length 7500 feet at 38.4 Kbaud, 4500 feet at 76.8 Kbaud, 3500 feet at 153.6 Kbaud extended, 2000 feet at 153.6 Kbaud, standard.
Bus Termination 75, 100, 120, or 150 ohm resistor at both ends of electrical bus cable
Modulation Technique FSK
Operating Temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Weight 450 g (0.99 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC687BEM731?

Answer: Yes. We offer repairs for the IC687BEM731 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC687BEM731?

Answer: If you buy the IC687BEM731 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC687BEM731 online?

Answer: Yes. Automation Stop sells the IC687BEM731 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC687BEM731?

Answer: The IC687BEM731 is made by Emerson - GE Fanuc.


Question: What Brand does the Allen Bradley Automation IC687BEM731 have?

Answer: The IC687BEM731 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Built-in Serial Ports does the Rockwell-Automation IC687BEM731 have?

Answer: The Built-in Serial Ports of the Rockwell-Automation IC687BEM731 is 1 (Handheld monitor port).


Question: What is the Bus Termination of the IC687BEM731?

Answer: The Bus Termination of the IC687BEM731 is 75, 100, 120, or 150 ohm resistor at both ends of electrical bus cable.


Question: What Current Rating does the Allen Bradley IC687BEM731 have?

Answer: The IC687BEM731 has a Current Rating of 1.3 Amperes.


Question: What Description does the IC687BEM731 have?

Answer: The Allen Bradley/Rockwell Automation IC687BEM731 has a Genius bus controller Description.


Question: What is the Devices on the Bus of the IC687BEM731?

Answer: The Devices on the Bus of the Rockwell-Automation IC687BEM731 is 32 devices at 153.6 Kbaud standard, 153.6 Kbaud extended, or 76.8 Kbaud. 16 devices at 38.4 Kbaud..


Question: What Maximum Bus Length does the Allen Bradley-Rockwell Automation IC687BEM731 have?

Answer: The Allen Bradley-Rockwell Automation IC687BEM731 has a Maximum Bus Length of 7500 feet at 38.4 Kbaud, 4500 feet at 76.8 Kbaud, 3500 feet at 153.6 Kbaud extended, 2000 feet at 153.6 Kbaud, standard..


Question: What Modulation Technique is included with the IC687BEM731?

Answer: The Allen Bradley/Rockwell Automation IC687BEM731 has a FSK Modulation Technique.


Question: What is the Operating Temperature of the Rockwell-Automation IC687BEM731?

Answer: The Rockwell-Automation IC687BEM731 has a Operating Temperature of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).


Question: What is the unit Number of the Allen Bradley/Rockwell Automation IC687BEM731?

Answer: The IC687BEM731 has a unit Number of IC687BEM731.


Question: What Redundancy is included with the IC687BEM731?

Answer: The IC687BEM731 has a Supported Redundancy.


Question: What Space does the Allen Bradley/Rockwell Automation IC687BEM731 have?

Answer: The IC687BEM731 has a Single-slot Space.


Question: What Voltage Rating does the Allen Bradley/Rockwell Automation IC687BEM731 have?

Answer: The Allen Bradley/Rockwell Automation IC687BEM731 has a Voltage Rating of 5 Volts DC.


Question: What Weight does the IC687BEM731 have?

Answer: The Weight of the IC687BEM731 is 450 g (0.99 lb).


Series information for IC687BEM731

For additional information about IC687BEM731 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC687BEM731.

Revision Part # Also Known As Availability
IC687BEM731-AA IC687BEM731 Series AA, Rev AA Request a Quote
IC687BEM731-AB IC687BEM731 Series AB, Rev AB Request a Quote
IC687BEM731L IC687BEM731 Series L, Rev L Request a Quote
IC687BEM731P IC687BEM731 Series P, Rev P Request a Quote
IC687BEM731S IC687BEM731 Series S, Rev S Request a Quote

Common Misspellings:

  • IC687BEM73I
  • IC6878EM731
  • IC6878EM73I
  • IC6B7BEM731
  • IC6B7BEM73I
  • IC6B78EM731
  • IC6B78EM73I
  • ICG87BEM731
  • ICG87BEM73I
  • ICG878EM731
  • ICG878EM73I
  • ICGB7BEM731
  • ICGB7BEM73I
  • ICGB78EM731
  • ICGB78EM73I
  • 1C687BEM731
  • 1C687BEM73I
  • 1C6878EM731
  • 1C6878EM73I
  • 1C6B7BEM731
  • 1C6B7BEM73I
  • 1C6B78EM731
  • 1C6B78EM73I
  • 1CG87BEM731
  • 1CG87BEM73I
  • 1CG878EM731
  • 1CG878EM73I
  • 1CGB7BEM731
  • 1CGB7BEM73I
  • 1CGB78EM731
  • 1CGB78EM73I

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP