GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC695RMX128

✓ In Stock

IC695RMX128 Image 1 thumbnail
IC695RMX128 Image 2 thumbnail
IC695RMX128 Image 3 thumbnail
IC695RMX128 Image 4 thumbnail
IC695RMX128 Image 5 thumbnail
IC695RMX128 Image 6 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC695RMX128
Series: RX3i PacSystem
UPC: 799705798694

Description:

The GE Fanuc Automation IC695RMX128 is a redundancy memory module. It features a dynamic packet size. Five hundred and eighty (580) milliamps at three point three (3.3) volts direct current (DC) is the required input power requirement for this redundancy memory module. It can support up to two hundred and fifty-six (256) nodes per each network. The input power rating on this module is 580 mA at 3.3 VDC / 220 mA at 5 VDC.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE IC695RMX128 is a redundancy memory exchange module that can be employed as either a reflective memory network node or a specific connection between CPUs in a hot standby CPU. The IC695RMX128 can be easily mounted in the main RX3i rack which can support six (6) RMX modules. The IC695RMX128 can be removed or inserted under power and servefs as a high-speed module that can be employed in a 2.12 gigabaud fibre-optic network. The IC695RMX128 offers a transfer rate of 2.1 gigabits per second. The IC695RMX128 senses and detects network errors and offers the possibility to configure output interrupt; it provides four (4) 32-bit general-purpose network interrupts. The IC695RMX128 contains ten (10) LED indicators located on the faceplate to show the module and communication status.

The IC695RMX128 offers a user memory of 128 megabytes. This module draws a current of 220 milliamperes at a voltage of +5 Volts DC and a current of 580 milliamperes at a voltage of +3.3 Volts DC. The IC695RMX128 provides a connection distance of 10 kilometers (6.2 miles) over a single-mode fibre optic network. The IC695RMX128 controls dynamic packet sizes of 4 bytes to 68 byte and is an open type module that should be mounted in an enclosure to protect the internal circuitry and to meet the IP20 and NEMA Type 1 enclosure rating. The IC695RMX128 minimizes the packet loss on the network by introducing the optional redundant transfer mode. It weighs approximately 230 grams (0.5 pounds) while shipping.

The GE Fanuc Automation IC695RMX128 comes with a user memory of 128 megabytes SDRAM. It comes with Compatibility with RMC128/RMX228 modules. As far as error alerts are concerned, this device is equipped with network error detection, hot insertion and removal, and configurable network. This GE Fanuc device is ideal for use where a hot standby CPU redundancy system is used. As a backup device, these systems must be using a secondary CPU. There must be a solid and continuous data transfer between these two devices at all times. When the link formed by this module is not in use, it is similar to the main module. The GE Fanuc Automation IC695RMX128 is used to share data between different PCs and other computing devices. In order to establish a connection, these devices must be connected using a high-speed fiber-optic network. Using a daisy chain loop, part number IC695RMX128 is capable of being connected to other devices. One hundred and twenty-eight (128) kilobytes, or KB, is the reflective memory rating on this module.

The IC695RMX128 module is able to be used with other external devices using a fiber optic cable. The cable must be installed in a daisy-chain loop. Until the transmission reaches the final receiver, it passes through various nodes. The resolution of this product is four (4) networks of thirty-two (32) bits each. It comes with a 128 MB SDRAM user memory. It allows the sharing of data between connected computers and other computing devices. The connection is established with such devices using the fiber optic cable. 

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series Redundancy memory exchange (RMX) module for Rx3i PacSystems
Part Number IC695RMX128
Module Type Redundancy Module
Applications Reflective networks, hot standby CPU redundancy systems
Reflective Memory 128 MB
Optic Network Speed 2.12 Gbaud
Transfer Rate 2.1 GB/second
Network Error Detection Supported
Hot Insertion Supported
Packet Size Dynamic, automatically controlled by RMX128/RMX228 module
User Memory 128MB SDRAM
Input Power 580 mA @ +3.3 VDC / 220 mA @ +5 VDC
Connectors Fiber-optic LC type, conforms to IEC 61754-20 \ Insertion loss: refer to cable/connector specifications \ Return loss: refer to cable/connector specifications
Weight 230 g (0.5 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC695RMX128?

Answer: Yes. We offer repairs for the IC695RMX128 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC695RMX128?

Answer: If you buy the IC695RMX128 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC695RMX128 online?

Answer: Yes. Automation Stop sells the IC695RMX128 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC695RMX128?

Answer: The IC695RMX128 is made by Emerson - GE Fanuc.


Question: What kind of Applications does the Allen Bradley/Rockwell Automation IC695RMX128 have?

Answer: The Allen Bradley/Rockwell Automation IC695RMX128 includes Reflective networks, hot standby central processing unit (CPU) redundancy systems for its Applications.


Question: What Brand does the Allen Bradley/Rockwell Automation IC695RMX128 have?

Answer: The IC695RMX128 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the Connectors of the IC695RMX128?

Answer: The Connectors of the IC695RMX128 is Fiber-optic LC type, conforms to IEC 61754-20 \ Insertion loss: refer to cable/connector specifications \ Return loss: refer to cable/connector specifications.


Question: What Hot Insertion does the Rockwell Automation IC695RMX128 have?

Answer: The IC695RMX128 has a Supported Hot Insertion.


Question: What is the Input Power of the IC695RMX128?

Answer: The Input Power of the IC695RMX128 is 580 mA @ +3.3 VDC / 220 mA @ +5 VDC.


Question: What Module Type does the Allen Bradley/Rockwell Automation IC695RMX128 have?

Answer: The Allen Bradley/Rockwell Automation IC695RMX128 has a Redundancy Module Module Type.


Question: What Network Error Detection does the IC695RMX128 have?

Answer: The IC695RMX128 has a Supported Network Error Detection.


Question: What is the Optic Network Speed of the IC695RMX128?

Answer: The IC695RMX128 has a Optic Network Speed of 2.12 Gbaud.


Question: What is the Packet Size of the Rockwell Automation IC695RMX128?

Answer: The IC695RMX128 has a Packet Size of Dynamic, automatically controlled by RMX128/RMX228 module.


Question: What is the part Number of the Allen-Bradley IC695RMX128?

Answer: The IC695RMX128 has a unit Number of IC695RMX128.


Question: What is the Reflective random-access memory (RAM) of the IC695RMX128?

Answer: The Reflective random-access memory (RAM) of the Allen-Bradley IC695RMX128 is 128 MB.


Question: What Transfer Rate does the IC695RMX128 have?

Answer: The IC695RMX128 has a Transfer Rate of 2.1 gigabyte/second.


Question: What is the User random-access memory (RAM) of the IC695RMX128?

Answer: The User random-access memory (RAM) of the Allen Bradley/Rockwell Automation IC695RMX128 is 128MB (megabytes)SDRAM.


Question: What is the Weight of the Allen Bradley/Rockwell Automation IC695RMX128?

Answer: The Weight of the IC695RMX128 is 230 g (0.5 lb) .


Series information for IC695RMX128

For additional information about IC695RMX128 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695RMX128.

Revision Part # Also Known As Availability
IC695RMX128-AB IC695RMX128 Series AB, Rev AB Request a Quote
IC695RMX128-AC IC695RMX128 Series AC, Rev AC Request a Quote
IC695RMX128-BE IC695RMX128 Series BE, Rev BE Request a Quote
IC695RMX128-CG IC695RMX128 Series CG, Rev CG Request a Quote
IC695RMX128-DG IC695RMX128 Series DG, Rev DG Request a Quote
IC695RMX128-EG IC695RMX128 Series EG, Rev EG Request a Quote
IC695RMX128-FH IC695RMX128 Series FH, Rev FH Request a Quote
IC695RMX128-HH IC695RMX128 Series HH, Rev HH Request a Quote
IC695RMX128-JH IC695RMX128 Series JH, Rev JH Request a Quote

Common Misspellings:

  • IC695RMX12B
  • IC695RMXI28
  • IC695RMXI2B
  • IC69SRMX128
  • IC69SRMX12B
  • IC69SRMXI28
  • IC69SRMXI2B
  • ICG95RMX128
  • ICG95RMX12B
  • ICG95RMXI28
  • ICG95RMXI2B
  • ICG9SRMX128
  • ICG9SRMX12B
  • ICG9SRMXI28
  • ICG9SRMXI2B
  • 1C695RMX128
  • 1C695RMX12B
  • 1C695RMXI28
  • 1C695RMXI2B
  • 1C69SRMX128
  • 1C69SRMX12B
  • 1C69SRMXI28
  • 1C69SRMXI2B
  • 1CG95RMX128
  • 1CG95RMX12B
  • 1CG95RMXI28
  • 1CG95RMXI2B
  • 1CG9SRMX128
  • 1CG9SRMX12B
  • 1CG9SRMXI28
  • 1CG9SRMXI2B

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP