GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC695PSD140 |
| Series: | RX3i PacSystem |
| UPC: | 799705798700 |
Description:
The GE Fanuc Automation RX3i PacSystem IC695PSD140 is a multipurpose power supply module. It can be combined with three other modules at the same time. Twenty-four (24) volts DC, or direct current, is the voltage rating of this module. The power supply rating on this module is forty (40) watts. 5.1 volts DC is the output current rating of this module. For ease of use, it comes with an on/off switch.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC695PSD140 is a high-efficiency power supply that delivers a power of 40 Watts. The IC695PSD140 supports an input voltage range from 18 to 30 volts DC and delivers three (3) different output voltages with different electrical powers: 3.3 Volts DC with an electrical power of 30 Watts, 5.1 Volts DC with an electrical power of 30 Watts, and 24 Volts DC with an electrical power of 10 Watts. The IC695PSD140 includes single fuse protection and has four (4) LED status indicators and an on/off output switch at the front side. This power supply supports an overcurrent of 7 Amperes on the 5 Volts DC output and an overcurrent of 10 Amperes on the 3.3 Volts DC output. The IC695PSD140 terminals for ground, ±24V power, and MOV can be wired individually with 14 to 22 AWG cable.
The IC695PSD140 supports a maximum input power of 60 Watts with DC input and an inrush current of 4 Amperes within a short time of 100 milliseconds. The IC695PSD140 delivers a total electrical power of 40 Watts and has a holdup time of ten (10) milliseconds. The IC695PSD140 has a door to cover and protect the user from accidental shock hazard. The IC695PSD140 can be easily installed alone in an RX3i universal backplane as either a single backplane power supply or with up to three (3) other multipurpose power supplies. This power supply weighs approximately 250 grams (0.55 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.
Part number IC695PSD140 is an automation RX3i PacSystem manufactured by GE Fanuc. This device comes with four (4) different light-emitting diode (LED) indicators. The color of the LED that indicates power can be amber or green, while red is the color for the LED that indicates a power supply fault. The amber indicator is also used to indicate overload and over temperature errors. All of the LED Indicators are used to display the current status of the module. 24 volts DC, or direct current, is the current nominal voltage rating. Eighteen to thirty (18 to 30) volts direct current is the input voltage range on this module. 40 (forty) watts maximum is the output power rating on this module. Using all of its three (3) outputs, the IC695PSD140 can generate a maximum output rated power of forty (40) watts. However, isolation is not provided. This module should not be used with other power supply modules, such as the IC695PSD040 or the IC695PSA040. Also, it must not be used in the increased capacity mode, or the redundant mode. This device supports installation using the RX3i universal backplane.
As stated before, the IC695PSD140 power supply module must not be used with either the IC695PSD040 or the IC695PSA040 power supply module. This is applicable for especially the increased capacity mode and the redundant mode. If users fail to comply with these requirements, they might end up causing serious damage to the module. The terminal current rating on this module is 6 amperes. 5.1 Volts Direct Current is the Output Current Rating for this module.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | 24 VDC, 40 Watts, multi-purpose power supply for Rx3i PacSystem |
| Part Number | IC695PSD140 |
| Power Supply Type | DC input power supply |
| Load Capacity | 40 Watts |
| Nominal Input | 24 VDC |
| Input Voltage Range | 18 to 30 VDC |
| Input Power | 60 Watts maximum at full load |
| Inrush Current | 4 Amperes, 100 milliseconds maximum |
| Output Capacities | +5,1 VDC, 30 watts / +3,3 VDC, 30 watts / 40 Watts maximum total of both outputs. |
| Output Voltage | 5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) / 3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal) |
| Number of Daisy-Chained PSD140 Supplies / Number of PSD140 Supplies in Universal Backplane | Up to 4 / Up to 4 |
| Current per Terminal | 6 Amperes |
| Overcurrent | 5 VDC output: 7 A maximum / 3,3 VDC output: 10 A maximum |
| Output Current | 5.1 VDC: 0 to 6 Amperes / 3.3 VDC: 0 to 9 Amperes |
| Isolation (input to backplane) | None |
| Ripple (all outputs) / Noise (all outputs) | 50 mV / 50 mV |
| Weight | 250 g (0.55 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC695PSD140?
Answer: Yes. We offer repairs for the IC695PSD140 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695PSD140?
Answer: If you buy the IC695PSD140 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695PSD140 online?
Answer: Yes. Automation Stop sells the IC695PSD140 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695PSD140?
Answer: The IC695PSD140 is made by Emerson - GE Fanuc.
Question: What Brand is included with the Allen-Bradley IC695PSD140?
Answer: The IC695PSD140 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Current per Terminal of the IC695PSD140?
Answer: The Current per Terminal of the IC695PSD140 is 6 Amperes.
Question: What Input Power does the Allen Bradley-Rockwell Automation IC695PSD140 have?
Answer: The Input Power of the IC695PSD140 is 60 Watts maximum at full load.
Question: What Input Voltage Range does the Rockwell-Automation IC695PSD140 have?
Answer: The IC695PSD140 has a Input Voltage Range of 18 to 30 VDC.
Question: What is the Inrush Current of the IC695PSD140?
Answer: The Rockwell Automation IC695PSD140 has a Inrush Current of 4 Amperes, 100 milliseconds maximum.
Question: Does the IC695PSD140 have a Isolation (input to backplane)?
Answer: None.
Question: What Load Capacity does the IC695PSD140 have?
Answer: The Load Capacity of the IC695PSD140 is 40 Watts.
Question: What is the Nominal Input of the IC695PSD140?
Answer: The IC695PSD140 has a Nominal Input of 24 VDC.
Question: What Number of Daisy-Chained PSD140 Supplies / Number of PSD140 Supplies in Universal Backplane does the IC695PSD140 have?
Answer: The Number of Daisy-Chained PSD140 Supplies / Number of PSD140 Supplies in Universal Backplane of the IC695PSD140 is Up to 4 / Up to 4.
Question: What is the Output Capacities of the IC695PSD140?
Answer: The Output Capacities of the IC695PSD140 is +5,1 VDC, 30 watts / +3,3 VDC, 30 watts / 40 Watts maximum total of both outputs..
Question: What is the Output Current of the Rockwell-Automation IC695PSD140?
Answer: The Rockwell-Automation IC695PSD140 has a Output Current of 5.1 VDC: 0 to 6 Amperes / 3.3 VDC: 0 to 9 Amperes.
Question: What Output Voltage does the Rockwell-Automation IC695PSD140 have?
Answer: The Rockwell-Automation IC695PSD140 has a Output Voltage of 5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) / 3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal).
Question: What is the Overcurrent of the IC695PSD140?
Answer: The IC695PSD140 has a Overcurrent of 5 VDC output: 7 A maximum / 3,3 VDC output: 10 A maximum.
Question: What part Number does the Allen Bradley-Rockwell Automation IC695PSD140 have?
Answer: The part Number of the Allen Bradley-Rockwell Automation IC695PSD140 is IC695PSD140.
Question: What power supply unit Type does the IC695PSD140 have?
Answer: The Allen Bradley/Rockwell Automation IC695PSD140 has a DC (direct current) input power supply component power supply component Type.
Question: What is the Ripple (all outputs) / Noise (all outputs) of the IC695PSD140?
Answer: The Ripple (all outputs) / Noise (all outputs) of the IC695PSD140 is 50 mV / 50 mV.
Question: What Weight does the IC695PSD140 have?
Answer: The Weight of the IC695PSD140 is 250 g (0.55 lb).
Series information for IC695PSD140
For additional information about IC695PSD140 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695PSD140.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC695PSD140A | IC695PSD140 Series A, Rev A | Request a Quote |
| IC695PSD140B | IC695PSD140 Series B, Rev B | Request a Quote |
| IC695PSD140D | IC695PSD140 Series D, Rev D | Request a Quote |
| IC695PSD140E | IC695PSD140 Series E, Rev E | Request a Quote |
| IC695PSD140J | IC695PSD140 Series J, Rev J | Request a Quote |
Common Misspellings:
- IC695PSD14O
- IC695PSDI40
- IC695PSDI4O
- IC695P5D140
- IC695P5D14O
- IC695P5DI40
- IC695P5DI4O
- IC69SPSD140
- IC69SPSD14O
- IC69SPSDI40
- IC69SPSDI4O
- IC69SP5D140
- IC69SP5D14O
- IC69SP5DI40
- IC69SP5DI4O
- ICG95PSD140
- ICG95PSD14O
- ICG95PSDI40
- ICG95PSDI4O
- ICG95P5D140
- ICG95P5D14O
- ICG95P5DI40
- ICG95P5DI4O
- ICG9SPSD140
- ICG9SPSD14O
- ICG9SPSDI40
- ICG9SPSDI4O
- ICG9SP5D140
- ICG9SP5D14O
- ICG9SP5DI40
- ICG9SP5DI4O
- 1C695PSD140
- 1C695PSD14O
- 1C695PSDI40
- 1C695PSDI4O
- 1C695P5D140
- 1C695P5D14O
- 1C695P5DI40
- 1C695P5DI4O
- 1C69SPSD140
- 1C69SPSD14O
- 1C69SPSDI40
- 1C69SPSDI4O
- 1C69SP5D140
- 1C69SP5D14O
- 1C69SP5DI40
- 1C69SP5DI4O
- 1CG95PSD140
- 1CG95PSD14O
- 1CG95PSDI40
- 1CG95PSDI4O
- 1CG95P5D140
- 1CG95P5D14O
- 1CG95P5DI40
- 1CG95P5DI4O
- 1CG9SPSD140
- 1CG9SPSD14O
- 1CG9SPSDI40
- 1CG9SPSDI4O
- 1CG9SP5D140
- 1CG9SP5D14O
- 1CG9SP5DI40
- 1CG9SP5DI4O
