GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC695PSA040 |
| Series: | RX3i PacSystem |
| UPC: | 37444057338 |
Description:
The IC695PSA040 is a power supply unit from RX3i PACSystems. The supply runs on an input voltage of 85 to 264 volts AC and 100 to 300 volts DC, and it has a power rating of 40 watts. This device has an isolation voltage, from the input to the backplane, of 250 volts AC when operating continuously and 1500 volts AC when operating for one (1) minute. This device has a current of 6 amperes per terminal.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC695PSA040 is a high capacity power supply that delivers a power of 40 Watts. The IC695PSA040 supports either an input voltage range from 100 Volts DC to 300 Volts DC or an input voltage range from 85 Volts AC to 264 Volts AC. The IC695PSA040 delivers three (3) different output voltages with different electrical powers: 3.3 Volts DC with an electrical power of 30 Watts, 5.1 Volts DC with an electrical power of 30 Watts and 24 Volts DC with an electrical power of 10 Watts. The IC695PSA040 includes single fuse protection. The IC695PSA040 has four (4) LED status indicators at the power supply front side. This power supply supports an overcurrent of 7 Amperes on the 5 Volt DC output and an overcurrent of 10 Amperes on the 3.3 Volt DC output.
The IC695PSA040 employs a backplane optical isolation offered by optocouplers to provide electrical isolation of 250 Volts between the input and the backplane. The IC695PSA040 power supply supports a maximum input power of 70 Watts with DC input and an inrush current of 4 Amperes within a short time of 250 milliseconds. The IC695PSA040 delivers a total electrical power of 40 Watts. The IC695PSA040 has a holdup time of 20 milliseconds. The IC695PSA040 has a door to cover and protect the user from accidental shock hazard. The IC695PSA040 power supply can be easily installed alone in an RX3i universal backplane. This power supply weighs approximately 1.55 kilograms (3.41 pounds) while shipping and operates at 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.
The IC695PSA040 is a power supply module by GE Fanuc/Emerson Automation that belongs to the PACSystems RX3i product family. It comes equipped with three different voltage ratings. The module comes with compatibility with other similar products that belong to the same IC695 product family. This module comes in compliance with the RX3i universal backplane. However, user discretion is advised as this power should not meddle with other power supplies belonging to the same backplane. The GE Fanuc / Emerson Automation IC695PSA040 does not come with support for redundancy or increased capacity. For power, the GE Fanuc/Emerson Automation IC695PSA040 requires 125 VDC or 120-240 VAC nominal voltage rating. 84-264 VAC or 100-300 VDC is the voltage range on this module. 70 watts is the input power requirement on this module. The withstand rating on this module is 4 amperes for a maximum duration of 250 milliseconds. For 24 VDC nominal output, 19.2 VDC to 28.8 VDC is its output voltage range. For 5.1 VDC nominal output, the output voltage range is 5.0 VDC to 5.2 VDC. For the nominal output of 3.3 VDC, the output voltage range is 3.1 VDC to 3.5 VDC. For 24 VDC 0 -1.6 amperes is the output power current rating. For 5.1 VDC, the output power rating is 0-6 amperes. For 3.3 VDC output, the output power rating is 0-9 amperes. The GE Fanuc/Emerson Automation IC695PSA040 comes equipped with four different LED indicators. The LEDs are used for P/S fault, overload, power, and over-temperature. For ease of use, it comes with an on/off switch.
The universal RX3i backplane is compatible with the IC695PSA040 power supply. The RX3i PacSystem modules that exceed the output power capacity of the IC695PSA040 must be mounted on expansion backplanes, as the IC695PSA040 does not allow a higher capacity or redundancy. The output voltage ranges from 19.2 volts DC to 28.8 volts DC for a 24 volts DC nominal output, 5.0 volts DC to 5.2 volts DC for a 5.1 volts DC nominal output, and 3.1 volts DC to 3.5 volts DC for a 3.3 volts DC nominal output with an output current of 0 to 1.6 amperes at 24 volts DC, 0.6 amperes at 5.1 volts DC, and 0.9 amperes at 3.3 volts DC output. This power supply is equipped with a total of four LED (light emitting diode) indicators. These LED indicators are power, P/S error, over-temperature, and overload. It also features a hidden ON/OFF switch in the power supply hinged door. This switch does not interrupt incoming power and has a protruding tab that prevents the switch from being accidentally turned on or off. The terminal block on this supply supports a wire size of 14 to 22 AWG, and the terminals are screw-type terminals with a maximum torque limit of 0.5 Nm, or the equivalent of 4.4 lb-in. The maximum current per terminal is approximately 6 amperes. In case of overloading and short-circuiting, the supply automatically shuts down to prevent damage to itself and connected hardware. It is important to keep this power supply module in an area that will allow for proper ventilation.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | 120/240 VAC /125 VDC, 40 Watts, 2 slots power supply for Rx3i PacSystem |
| Part Number | IC695PSA040 |
| Power Supply Type | AC/DC input power supply |
| Load Capacity | 40 Watts |
| Nominal Input | 120/240 VAC or 125 VDC |
| Input Voltage Range | 85 VAC to 264 VAC or 100 VDC to 300 VDC |
| Input Power | 70 Watts, maximum |
| Inrush Current | 4 Amperes peak, 250 ms maximum |
| Output Capacities | +5,1 VDC, 30 watts / +3,3 VDC, 30 watts |
| Output Voltage | 24 VDC: 19.2 VDC to 28.8 VDC / 5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) / 3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal) |
| Number of Fuses | 1 |
| Current per Terminal | 6 Amperes |
| Overcurrent | 5 VDC output: 7 A maximum / 3,3 VDC output: 10 A maximum |
| Output Current | 24 VDC: 0 to 1.6 Amps / 5.1 VDC: 0 to 6 Amps / 3.3 VDC: 0 to 9 Amps |
| Isolation (input to backplane) | 250 VAC continuous; 1500 VAC for 1 minute |
| Ripple (all outputs) / Noise (all outputs) | 150 mV / 150 mV |
| Weight | 1.55 g (3.41 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC695PSA040?
Answer: Yes. We offer repairs for the IC695PSA040 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695PSA040?
Answer: If you buy the IC695PSA040 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695PSA040 online?
Answer: Yes. Automation Stop sells the IC695PSA040 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695PSA040?
Answer: The IC695PSA040 is made by Emerson - GE Fanuc.
Question: What Brand is included with the IC695PSA040?
Answer: The Allen Bradley/Rockwell Automation IC695PSA040 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Current per Terminal of the IC695PSA040?
Answer: The Rockwell Automation IC695PSA040 has a Current per Terminal of 6 Amperes.
Question: What is the Input Power of the IC695PSA040?
Answer: The Allen Bradley IC695PSA040 has a Input Power of 70 Watts, maximum.
Question: What is the Input Voltage Range of the IC695PSA040?
Answer: The Allen Bradley Automation IC695PSA040 has a Input Voltage Range of 85 VAC (voltage alternating current) to 264 VAC (voltage alternating current) or 100 VDC to 300 VDC.
Question: What is the Inrush Current of the Allen Bradley-Rockwell Automation IC695PSA040?
Answer: The Inrush Current of the Allen Bradley-Rockwell Automation IC695PSA040 is 4 Amperes peak, 250 ms maximum.
Question: What is the Isolation (input to backplane) of the Allen Bradley Automation IC695PSA040?
Answer: The IC695PSA040 has a Isolation (input to backplane) of 250 VAC (voltage alternating current) continuous; 1500 VAC (voltage alternating current) for 1 minute.
Question: What is the Load Capacity of the Allen Bradley-Rockwell Automation IC695PSA040?
Answer: The Allen Bradley-Rockwell Automation IC695PSA040 has a Load Capacity of 40 Watts.
Question: What is the Nominal Input of the IC695PSA040?
Answer: The Nominal Input of the Allen Bradley Automation IC695PSA040 is 120/240 voltage alternating current (VAC) or 125 VDC.
Question: What is the Number of Fuses of the IC695PSA040?
Answer: The Number of Fuses of the IC695PSA040 is 1.
Question: What Output Capacities does the IC695PSA040 have?
Answer: The IC695PSA040 has a Output Capacities of +5,1 VDC, 30 watts / +3,3 VDC, 30 watts.
Question: What Output Current does the Allen-Bradley IC695PSA040 have?
Answer: The Output Current of the Allen-Bradley IC695PSA040 is 24 VDC: 0 to 1.6 amperes / 5.1 VDC: 0 to 6 amperes / 3.3 VDC: 0 to 9 amperes.
Question: What is the Output Voltage of the IC695PSA040?
Answer: The Output Voltage of the IC695PSA040 is 24 VDC: 19.2 VDC to 28.8 VDC / 5.1 VDC: 5.0 VDC to 5.2 VDC (5.1 VDC nominal) / 3.3 VDC: 3.1 VDC to 3.5 VDC (3.3 VDC nominal).
Question: What is the Overcurrent of the Rockwell-Automation IC695PSA040?
Answer: The Overcurrent of the IC695PSA040 is 5 VDC output: 7 A maximum / 3,3 VDC output: 10 A maximum.
Question: What part Number does the Rockwell Automation IC695PSA040 have?
Answer: The part Number of the IC695PSA040 is IC695PSA040.
Question: What power supply Type is included with the Allen Bradley/Rockwell Automation IC695PSA040?
Answer: The IC695PSA040 has a AC (alternating current)/direct current input power supply unit power supply unit Type.
Question: What is the Ripple (all outputs) / Noise (all outputs) of the IC695PSA040?
Answer: The Ripple (all outputs) / Noise (all outputs) of the Rockwell Automation IC695PSA040 is 150 mV / 150 mV.
Question: What is the Weight of the IC695PSA040?
Answer: The Weight of the IC695PSA040 is 1.55 g (3.41 lb).
Series information for IC695PSA040
For additional information about IC695PSA040 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695PSA040.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC695PSA040-AK | IC695PSA040 Series AK, Rev AK | Request a Quote |
| IC695PSA040B | IC695PSA040 Series B, Rev B | Request a Quote |
| IC695PSA040F | IC695PSA040 Series F, Rev F | Request a Quote |
| IC695PSA040H | IC695PSA040 Series H, Rev H | Request a Quote |
| IC695PSA040K | IC695PSA040 Series K, Rev K | Request a Quote |
| IC695PSA040N | IC695PSA040 Series N, Rev N | Request a Quote |
Common Misspellings:
- IC695PSA04O
- IC695PSAO40
- IC695PSAO4O
- IC695P5A040
- IC695P5A04O
- IC695P5AO40
- IC695P5AO4O
- IC69SPSA040
- IC69SPSA04O
- IC69SPSAO40
- IC69SPSAO4O
- IC69SP5A040
- IC69SP5A04O
- IC69SP5AO40
- IC69SP5AO4O
- ICG95PSA040
- ICG95PSA04O
- ICG95PSAO40
- ICG95PSAO4O
- ICG95P5A040
- ICG95P5A04O
- ICG95P5AO40
- ICG95P5AO4O
- ICG9SPSA040
- ICG9SPSA04O
- ICG9SPSAO40
- ICG9SPSAO4O
- ICG9SP5A040
- ICG9SP5A04O
- ICG9SP5AO40
- ICG9SP5AO4O
- 1C695PSA040
- 1C695PSA04O
- 1C695PSAO40
- 1C695PSAO4O
- 1C695P5A040
- 1C695P5A04O
- 1C695P5AO40
- 1C695P5AO4O
- 1C69SPSA040
- 1C69SPSA04O
- 1C69SPSAO40
- 1C69SPSAO4O
- 1C69SP5A040
- 1C69SP5A04O
- 1C69SP5AO40
- 1C69SP5AO4O
- 1CG95PSA040
- 1CG95PSA04O
- 1CG95PSAO40
- 1CG95PSAO4O
- 1CG95P5A040
- 1CG95P5A04O
- 1CG95P5AO40
- 1CG95P5AO4O
- 1CG9SPSA040
- 1CG9SPSA04O
- 1CG9SPSAO40
- 1CG9SPSAO4O
- 1CG9SP5A040
- 1CG9SP5A04O
- 1CG9SP5AO40
- 1CG9SP5AO4O
