GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC695PNS001 |
| Series: | RX3i PacSystem |
| UPC: | 376202219787 |
Description:
The GE Fanuc / Emerson Automation IC695PNS001 is a Profinet scanner module. It belongs to the PACSystems RX3i product family. It establishes connection between a remote I/O rack to a Series 90-30 / RX3i module to Profinet I/O network. It comes equipped with one USB micro port. This port is primarily used for installing upgrades of firmware. Furthermore, it also features 4 Ethernet ports. To install firmware upgrades, users can use the micro-USB port.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC695PNS001 is a PROFINET scanner module that offers the possibility to interface the controller to either RX3i modules or remote universal racks. This scanner supports SDHC and SD cards. This device contains RJ-45 and Micro-B USB 2.0 connectors. The scanner has also Ethernet ports and SFP cages. The module can communicate with a data rate of 10 megabits per second, 100 megabits per second, and 1000 megabits per second. This scanner draws a current of 1.1 amperes at a voltage of +5 volts DC and 1.2 amperes at a voltage of 3.3 volts DC. The IC695PNS001 includes thirty-two input status bits and output control bits. This device has eight LED indicators that provide twenty-two patterns to show the current status of the module. The IC695PNS001 is compatible with CPE310, CPE305, CPU320, and CPU315 RX3i CPUs.
The IC695PNS001 scans the rack modules and exchanges data within the PROFINET I/O LAN. This module supports five MAC addresses and one CIDR IP address. The scanner is an open-type module and should be mounted in an enclosure to protect the internal circuitry. The IC695PNS001 can be mounted in either Slot 6 of an RX3i 7-slot backplane or Slot 1 or Slot 2 of an RX3i universal backplane. This unit supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 10 hertz to 500 hertz. The IC695PNS001 weighs approximately 510 grams (1.12 pounds) while shipping and operates at 0 to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
The Ethernet ports on the GE Fanuc / Emerson Automation IC695PNS001 support data transfer at 10/100/1000 megabytes per second. It is a type of single slot wide module. It is primarily used to manage the various Profinet connections. This scanner module can be used for communication purposes with remote I/O devices. It can also communicate with the universal I/O backplanes. Using the Profinet network, it can also exchange I/O data with all the connected CPUs. Communicating with personal computers in the network is very easy with this module. It is also used for communicating with human machine interface (HMI), supervisory control, and data acquisition (SCADA). It can also establish communication with other similar automation components. The single micro-USB port is ideally used for installing firmware upgrades.
Part number IC695PNS001 comes with four (4) embedded Ethernet ports, all of which support the Profinet protocol. Furthermore, all four ports support modern communication speeds. With the SFP modules, two (2) small form factor (SFP) ports should be installed. These ports are easily pluggable. This enables the conversion of fiber optic media to a regular network. The installation, and configuration for this module are relatively easy. Users can save information such as the I/O device name, and the IP address on the built-in SD card. Users can use this data by inserting this same SD card into other Profinet scanner modules. The rated internal power on this module is 1.2 amperes at 3.3 volts direct current (DC). One-point-one (1.1) amperes at a 5 volt direct current (DC) voltage rating is the rated maximum power of this device.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | PACSystems RX3i |
| Part Number | IC695PNS001 |
| Description | PROFINET scanner module |
| Load requirement | 1.2 A at 3.3VDC, 1.1 A at 5 VDC |
| Number of slots | 1 (single slot) |
| Data rate | 10, 100 or 1000 Mbps link speed |
| Ports | 4 x switched Ethernet ports, 2 RJ-45 connectors, 2 SFP cages, 1 Micro-B USB 2.0 connector |
| Protocol support | PROFINET media redundancy |
| Number of LEDs | 8 |
| LED indicators | OK LED, LAN LED, STATUS LED, CONN LED, individual PORT LEDs, ACTIVE LED and USB LED |
| Backplane support | Universal |
| Weight | 510 g (1.12 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC695PNS001?
Answer: Yes. We offer repairs for the IC695PNS001 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695PNS001?
Answer: If you buy the IC695PNS001 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695PNS001 online?
Answer: Yes. Automation Stop sells the IC695PNS001 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695PNS001?
Answer: The IC695PNS001 is made by Emerson - GE Fanuc.
Question: What Backplane support does the Rockwell-Automation IC695PNS001 have?
Answer: The Rockwell-Automation IC695PNS001 has a Universal Backplane support.
Question: What Brand is included with the Rockwell Automation IC695PNS001?
Answer: The Rockwell Automation IC695PNS001 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Data rate of the IC695PNS001?
Answer: The Data rate of the Allen Bradley Automation IC695PNS001 is 10, 100 or 1000 Mbps link speed.
Question: What Description does the Allen Bradley-Rockwell Automation IC695PNS001 have?
Answer: The Allen Bradley-Rockwell Automation IC695PNS001 has a PROFINET scanner module Description.
Question: What kind of LED indicators does the IC695PNS001 have?
Answer: The Allen Bradley IC695PNS001 has LED indicators OK LED, LAN LED, STATUS LED, CONN LED, individual PORT LEDs, ACTIVE LED and USB LED.
Question: What is the Load requirement of the IC695PNS001?
Answer: The Allen-Bradley IC695PNS001 has a Load requirement of 1.2 A at 3.3VDC, 1.1 A at 5 VDC.
Question: What is the Number of LEDs of the Allen Bradley IC695PNS001?
Answer: The Number of LEDs of the IC695PNS001 is 8.
Question: What Number of slots does the IC695PNS001 have?
Answer: The IC695PNS001 has a Number of slots of 1 (single slot).
Question: What component Number does the IC695PNS001 have?
Answer: The IC695PNS001 has a part Number of IC695PNS001.
Question: What Ports does the Allen Bradley-Rockwell Automation IC695PNS001 have?
Answer: The Allen Bradley-Rockwell Automation IC695PNS001 has a Ports of 4 x switched Ethernet ports, 2 RJ-45 connectors, 2 small form-factor pluggable transceiver (SFP) cages, 1 Micro-B USB 2.0 connector.
Question: What Protocol support is included with the IC695PNS001?
Answer: The Allen-Bradley IC695PNS001 has a PROFINET media redundancy Protocol support.
Question: What is the Weight of the IC695PNS001?
Answer: The Allen-Bradley IC695PNS001 has a Weight of 510 g (1.12 lb).
Series information for IC695PNS001
For additional information about IC695PNS001 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695PNS001.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC695PNS001-BABB | IC695PNS001 Series BABB, Rev BABB | Request a Quote |
| IC695PNS001-BHBF | IC695PNS001 Series BHBF, Rev BHBF | Request a Quote |
Common Misspellings:
- IC695PNS00I
- IC695PNS0O1
- IC695PNS0OI
- IC695PNSO01
- IC695PNSO0I
- IC695PNSOO1
- IC695PNSOOI
- IC695PN5001
- IC695PN500I
- IC695PN50O1
- IC695PN50OI
- IC695PN5O01
- IC695PN5O0I
- IC695PN5OO1
- IC695PN5OOI
- IC69SPNS001
- IC69SPNS00I
- IC69SPNS0O1
- IC69SPNS0OI
- IC69SPNSO01
- IC69SPNSO0I
- IC69SPNSOO1
- IC69SPNSOOI
- IC69SPN5001
- IC69SPN500I
- IC69SPN50O1
- IC69SPN50OI
- IC69SPN5O01
- IC69SPN5O0I
- IC69SPN5OO1
- IC69SPN5OOI
- ICG95PNS001
- ICG95PNS00I
- ICG95PNS0O1
- ICG95PNS0OI
- ICG95PNSO01
- ICG95PNSO0I
- ICG95PNSOO1
- ICG95PNSOOI
- ICG95PN5001
- ICG95PN500I
- ICG95PN50O1
- ICG95PN50OI
- ICG95PN5O01
- ICG95PN5O0I
- ICG95PN5OO1
- ICG95PN5OOI
- ICG9SPNS001
- ICG9SPNS00I
- ICG9SPNS0O1
- ICG9SPNS0OI
- ICG9SPNSO01
- ICG9SPNSO0I
- ICG9SPNSOO1
- ICG9SPNSOOI
- ICG9SPN5001
- ICG9SPN500I
- ICG9SPN50O1
- ICG9SPN50OI
- ICG9SPN5O01
- ICG9SPN5O0I
- ICG9SPN5OO1
- ICG9SPN5OOI
- 1C695PNS001
- 1C695PNS00I
- 1C695PNS0O1
- 1C695PNS0OI
- 1C695PNSO01
- 1C695PNSO0I
- 1C695PNSOO1
- 1C695PNSOOI
- 1C695PN5001
- 1C695PN500I
- 1C695PN50O1
- 1C695PN50OI
- 1C695PN5O01
- 1C695PN5O0I
- 1C695PN5OO1
- 1C695PN5OOI
- 1C69SPNS001
- 1C69SPNS00I
- 1C69SPNS0O1
- 1C69SPNS0OI
- 1C69SPNSO01
- 1C69SPNSO0I
- 1C69SPNSOO1
- 1C69SPNSOOI
- 1C69SPN5001
- 1C69SPN500I
- 1C69SPN50O1
- 1C69SPN50OI
- 1C69SPN5O01
- 1C69SPN5O0I
- 1C69SPN5OO1
- 1C69SPN5OOI
- 1CG95PNS001
- 1CG95PNS00I
- 1CG95PNS0O1
- 1CG95PNS0OI
- 1CG95PNSO01
