GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC695ECM850

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC695ECM850
Series: RX3i PacSystem
UPC: 799705806757

Description:

The GE Fanuc Emerson IC695ECM850 is an Ethernet module that can be employed with RX3i CPUs. The module offers four switched Ethernet ports. The IC695ECM850 weighs approximately 450 grams (0.99 pounds) while shipping.


Key Features:

  • utilizes an operating temperature of 0 to 60 degrees celsius

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC695ECM850 is an Ethernet communication module that can be employed with RX3i CPUs. The module offers two RJ-45 and SFP cages with five MAC addresses and a single IP address. This module can support and operate with 100/1000 megabits per second single-mode or multi-mode fiber, and 10/100/1000 megabits per second copper connections. The IC695ECM850 occupies one slot only on a universal backplane with a PCI bus. This communication module includes a mini USB port that can be connected to a computer through a command-line interface. The device supports both the linear and the star topologies. This unit can be employed with CRU320, CPE305, CPE310, CPU320, and CPU315 RX3i CPUs.

This Ethernet interface module requires a current of 614 milliamperes at a voltage of 5 volts DC and a current of 840 milliamperes at a voltage of 3.3 volts DC. The IC695ECM850 includes ten LED indicators on the faceplate to show the module and communication status. This module contains an SD-card slot. The IC695ECM850 module supports the hot-swapping feature. This unit supports a non-condensing relative humidity range from 5 percent to 95 percent and a vibration frequency range from 10 hertz to 500 hertz. The device can be stored in a safe environment that shouldn’t be full of condensation or corrosive material at a temperature from -40 degrees to 70 degrees Celsius (-40 degrees to 158 degrees Fahrenheit). The IC695ECM850 weighs approximately 450 grams (0.99 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series PACSystems RX3i
Part Number IC695ECM850
Description Ethernet communication module
Voltage rating 3.3 VDC/5 VDC
Current rating 840 mA @ 3.3 VDC / 614 mA @ 5 VDC
Number of network ports Two RJ-45 and Two SFP Cages
Micro USB connector One, for communication with a computer using Command Line Interface
Local Area Network (LAN) IEEE 802.2 Logical Link Control Class I / IEEE 802.3 CSMA/CD Medium Access Control 10/100/1000 Mbps
CPU Compatibility RX3i CPUs with firmware version 8.05 or higher (CRU320, CPU320, CPU315, CPE305, CPE310)
Number of IP addresses 1
Number of MAC addresses 5
Network topologies supported Star (switched), linear (daisy-chain)
Time synchronization SNTP Client – Multicast and Broadcast
Operating temperature 0 to 60 degrees C (32 to 140 degrees F)
Weight 450 g (0.99 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC695ECM850?

Answer: Yes. We offer repairs for the IC695ECM850 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC695ECM850?

Answer: If you buy the IC695ECM850 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC695ECM850 online?

Answer: Yes. Automation Stop sells the IC695ECM850 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC695ECM850?

Answer: The IC695ECM850 is made by Emerson - GE Fanuc.


Question: What Brand is included with the IC695ECM850?

Answer: The Allen Bradley-Rockwell Automation IC695ECM850 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What is the central processing unit (CPU) Compatibility of the Allen Bradley IC695ECM850?

Answer: The Allen Bradley IC695ECM850 has a central processing unit (CPU) Compatibility of RX3i CPUs with firmware version 8.05 or higher (CRU320, CPU320, CPU315, CPE305, CPE310).


Question: What Current rating does the IC695ECM850 have?

Answer: The IC695ECM850 has a Current rating of 840 mA @ 3.3 VDC / 614 mA @ 5 VDC.


Question: What Description is included with the Allen Bradley/Rockwell Automation IC695ECM850?

Answer: The Allen Bradley/Rockwell Automation IC695ECM850 has a Ethernet communication module Description.


Question: What Local Area Network (LAN) does the IC695ECM850 have?

Answer: The Allen Bradley IC695ECM850 has a Local Area Network (LAN) of IEEE 802.2 Logical Link Control Class I / IEEE 802.3 CSMA/CD Medium Access Control 10/100/1000 Mbps.


Question: What Micro USB connector does the Allen Bradley/Rockwell Automation IC695ECM850 have?

Answer: The Allen Bradley/Rockwell Automation IC695ECM850 has a One, for communication with a computer using Command Line Interface Micro USB connector.


Question: What Network topologies supported is included with the Allen Bradley Automation IC695ECM850?

Answer: The IC695ECM850 has a Star (switched), linear (daisy-chain) Network topologies supported.


Question: What is the Number of IP addresses of the IC695ECM850?

Answer: The Number of IP addresses of the IC695ECM850 is 1.


Question: What is the Number of MAC addresses of the IC695ECM850?

Answer: The Number of MAC addresses of the Rockwell Automation IC695ECM850 is 5.


Question: What Number of network ports does the Allen-Bradley IC695ECM850 have?

Answer: The Number of network ports of the Allen-Bradley IC695ECM850 is Two RJ-45 and Two small form-factor pluggable transceiver (SFP) Cages.


Question: What is the Operating temperature of the Allen Bradley-Rockwell Automation IC695ECM850?

Answer: The Operating temperature of the IC695ECM850 is 0 to 60 degrees C (32 to 140 degrees F).


Question: What is the component Number of the IC695ECM850?

Answer: The Allen-Bradley IC695ECM850 has a unit Number of IC695ECM850.


Question: What Time synchronization is included with the Rockwell Automation IC695ECM850?

Answer: The IC695ECM850 has a SNTP Client – Multicast and Broadcast Time synchronization.


Question: What Voltage rating does the Allen Bradley/Rockwell Automation IC695ECM850 have?

Answer: The Voltage rating of the Allen Bradley/Rockwell Automation IC695ECM850 is 3.3 VDC/5 VDC.


Question: What Weight does the Allen Bradley IC695ECM850 have?

Answer: The Weight of the IC695ECM850 is 450 g (0.99 lb).


Series information for IC695ECM850

For additional information about IC695ECM850 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695ECM850.

Revision Part # Also Known As Availability
IC695ECM850-AA IC695ECM850 Series AA, Rev AA Request a Quote

Common Misspellings:

  • IC695ECM85O
  • IC695ECM8S0
  • IC695ECM8SO
  • IC695ECMB50
  • IC695ECMB5O
  • IC695ECMBS0
  • IC695ECMBSO
  • IC69SECM850
  • IC69SECM85O
  • IC69SECM8S0
  • IC69SECM8SO
  • IC69SECMB50
  • IC69SECMB5O
  • IC69SECMBS0
  • IC69SECMBSO
  • ICG95ECM850
  • ICG95ECM85O
  • ICG95ECM8S0
  • ICG95ECM8SO
  • ICG95ECMB50
  • ICG95ECMB5O
  • ICG95ECMBS0
  • ICG95ECMBSO
  • ICG9SECM850
  • ICG9SECM85O
  • ICG9SECM8S0
  • ICG9SECM8SO
  • ICG9SECMB50
  • ICG9SECMB5O
  • ICG9SECMBS0
  • ICG9SECMBSO
  • 1C695ECM850
  • 1C695ECM85O
  • 1C695ECM8S0
  • 1C695ECM8SO
  • 1C695ECMB50
  • 1C695ECMB5O
  • 1C695ECMBS0
  • 1C695ECMBSO
  • 1C69SECM850
  • 1C69SECM85O
  • 1C69SECM8S0
  • 1C69SECM8SO
  • 1C69SECMB50
  • 1C69SECMB5O
  • 1C69SECMBS0
  • 1C69SECMBSO
  • 1CG95ECM850
  • 1CG95ECM85O
  • 1CG95ECM8S0
  • 1CG95ECM8SO
  • 1CG95ECMB50
  • 1CG95ECMB5O
  • 1CG95ECMBS0
  • 1CG95ECMBSO
  • 1CG9SECM850
  • 1CG9SECM85O
  • 1CG9SECM8S0
  • 1CG9SECM8SO
  • 1CG9SECMB50
  • 1CG9SECMB5O
  • 1CG9SECMBS0
  • 1CG9SECMBSO

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP