GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC695CPU310 |
| Series: | RX3i PacSystem |
| UPC: | 47085403555 |
Description:
The GE Fanuc / Emerson Automation IC693CPU310 is a PACSystem RX3i Processor Module. It comes equipped with 10 megabytes RAM. Along with the RAM, this processor module also comes with 10 megabytes non-volatile user memory. 300 megahertz is the rated processor speed on this GE Fanuc processor module. 0.195 milliseconds per 1000 boolean instructions is its typical scan rate.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Features for the IC695CPU310 include configurable data and program memory, support of programming languages like Ladder Diagram, Structured Text, and C, as well as support of auto-located Symbolic Variables that can utilize any increment of user memory. The IC695CPU310 supports most Series 90-30 modules and expansion racks. It also supports up to 512 program blocks with a maximum size for a block being 128 Kilobytes. Battery memory retention is 5 years at 20 degrees Celsius, or 40 days nominal without applied power. The IC695CPU310 has a program storage of up to 10 Megabytes of battery-backed RAM and 10 Megabytes of non-volatile flash user memory. The current required from 5 Volt bus is 3.2 Amperes nominal; operating temperature is 0 to 60 degrees Celsius, or 32 to 140 degrees Fahrenheit. This hardware supports floating point and it has a typical Boolean execution speed of 0.195 milliseconds per 1000 Boolean contacts/coils.
Additional specifications for the IC695CPU310 include a time of day clock accuracy that has a maximum drift of 2 seconds per day. Elapsed time clock (internal timing) accuracy is 0.01% maximum; embedded communications include RS-232 and RS-485. The maximum cable lengths for Port 1 (RS-232) and Port 2 (RS-485) are 15 meters (50 feet) and 1200 meters (4000 feet), respectively. Serial protocols supported include Modbus RTU Slave, SNP, and Serial I/O. This hardware has dual backplane bus support for RX3i PCI and 90-300-style serial. With regard to firmware upgrades, the IC695CPU310 CPU receives firmware upgrades through a CPU serial port. To install an upgrade, the manufacturer recommends that the installer connect WinLoader to the CPU RS-232 or RS-485 serial port.
The GE Fanuc / Emerson Automation IC693CPU310 comes with 2 (two) serial ports used for communication. Port one (1) supports RS-232 while port two (2) supports RS-485 communication standards. This GE Fanuc Automation unit is a type of programmable automation controller (PAC). It is regarded as an advanced automation unit, as it supports increased RAM, faster microprocessor, and faster logic execution. This GE Fanuc Automation unit comes in a compact assembly. It comes packed with ten (10) megabytes, or MB, of user memory. The GE Fanuc / Emerson Automation IC693CPU31 comes with a non-volatile memory of ten (10) megabytes. The non-volatile memory on this module is higher than any other PACs on the market. This device is equipped with an Intel Celeron M processor. Three hundred (300) megahertz (MHz) is the processing speed on the built-in Intel Processor. In only 0.195 milliseconds, this processor can successfully process up to 1000 (one thousand) boolean instructions. A downloading speed of 512 blocks is supported. This GE Fanuc Automation module is supported for use with two backplanes. These backplanes include the Rx3i 16 and Rx3i 12 slot universal backplanes. As the backplane connections on the GE Fanuc / Emerson Automation IC693CPU31 is established via a PCI, it enables data exchange at a high speed. IEC 61131-3 standard programming languages are supported on this module.
Unlike other modules, the GE Fanuc / Emerson Automation IC693CPU310 does not require rack or hub switches to operate. This redundancy CPU comes equipped with a 64 Megabytes of user memory. Along with an RJ-45 Ethernet port, there is also an RS-232 serial port on this module.
Technical Specifications
| Brand | GE Fanuc Emerson |
| Battery, Memory Retention | 5 Years @ 20 Degrees Celsius - 40 Days nominal without applied power |
| Program Storage | RAM: 10 Megabytes, Max. Flash: 10 Megabytes, Max. (Non-Volatile) |
| Current Required from 5V Bus | 3.2 Amperes Nominal |
| Operating Temperature | 0 to 60 degrees Celsius |
| Floating Point | Yes |
| Boolean Execution Speed, Typical | 0.195 milliseconds per 1000 Boolean contacts/coils |
| Time of Day Clock accuracy | Maximum Drift of 2 Seconds per Day |
| Elapsed Time Clock (internal timing) Accuracy | 0.01% Maximum |
| Embedded Communications | RS-232, RS-485 |
| Serial Protocols Supported | Modbus RTU Slave, SNP, Serial I/O |
| Program Blocks | Up to 512 Program Blocks (Max. Size per Block = 128 Kilobytes) |
FAQ
Question: Does Automation Stop offer repairs on the IC695CPU310?
Answer: Yes. We offer repairs for the IC695CPU310 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695CPU310?
Answer: If you buy the IC695CPU310 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695CPU310 online?
Answer: Yes. Automation Stop sells the IC695CPU310 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695CPU310?
Answer: The IC695CPU310 is made by Emerson - GE Fanuc.
Question: What is the Battery, random-access memory (RAM) Retention of the IC695CPU310?
Answer: The IC695CPU310 has a Battery, random-access memory (RAM) Retention of 5 Years @ 20 Degrees Celsius - 40 Days nominal without applied power.
Question: What Boolean Execution Speed, Typical does the IC695CPU310 have?
Answer: The Allen Bradley Automation IC695CPU310 has a Boolean Execution Speed, Typical of 0.195 milliseconds per 1000 Boolean contacts/coils.
Question: What Brand does the IC695CPU310 have?
Answer: The Allen Bradley IC695CPU310 has a GE Fanuc Emerson Brand.
Question: Does the IC695CPU310 have a Current Required from 5 volts Bus?
Answer: 3.2 Amperes Nominal.
Question: What is the Elapsed Time Clock (internal timing) Accuracy of the Rockwell-Automation IC695CPU310?
Answer: The IC695CPU310 has a Elapsed Time Clock (internal timing) Accuracy of 0.01% Maximum.
Question: What is the Embedded Communications of the IC695CPU310?
Answer: The IC695CPU310 has a Embedded Communications of RS-232, RS-485.
Question: Does the IC695CPU310 have a Floating Point?
Answer: Yes.
Question: What is the Operating Temperature of the IC695CPU310?
Answer: The Operating Temperature of the IC695CPU310 is 0 to 60 degrees Celsius.
Question: What is the Program Blocks of the Rockwell-Automation IC695CPU310?
Answer: The Program Blocks of the IC695CPU310 is Up to 512 Program Blocks (Max. Size per Block = 128 Kilobytes).
Question: Does the Rockwell-Automation IC695CPU310 have a Program Storage?
Answer: random-access random-access memory (RAM) (RAM): 10 Megabytes, Max. Flash: 10 Megabytes, Max. (Non-Volatile)
Question: What Serial Protocols Supported does the IC695CPU310 have?
Answer: The IC695CPU310 has a Modbus RTU Slave, SNP, Serial input/output Serial Protocols Supported.
Question: What Time of Day Clock accuracy does the IC695CPU310 have?
Answer: The IC695CPU310 has a Time of Day Clock accuracy of Maximum Drift of 2 Seconds per Day.
Series information for IC695CPU310
For additional information about IC695CPU310 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695CPU310.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC695CPU310-BB | IC695CPU310 Series BB, Rev BB | Request a Quote |
| IC695CPU310-CC | IC695CPU310 Series CC, Rev CC | Request a Quote |
| IC695CPU310-EM | IC695CPU310 Series EM, Rev EM | Request a Quote |
| IC695CPU310-FS | IC695CPU310 Series FS, Rev FS | Request a Quote |
| IC695CPU310-GV | IC695CPU310 Series GV, Rev GV | Request a Quote |
| IC695CPU310-GW | IC695CPU310 Series GW, Rev GW | Request a Quote |
Common Misspellings:
- IC695CPU31O
- IC695CPU3I0
- IC695CPU3IO
- IC69SCPU310
- IC69SCPU31O
- IC69SCPU3I0
- IC69SCPU3IO
- ICG95CPU310
- ICG95CPU31O
- ICG95CPU3I0
- ICG95CPU3IO
- ICG9SCPU310
- ICG9SCPU31O
- ICG9SCPU3I0
- ICG9SCPU3IO
- 1C695CPU310
- 1C695CPU31O
- 1C695CPU3I0
- 1C695CPU3IO
- 1C69SCPU310
- 1C69SCPU31O
- 1C69SCPU3I0
- 1C69SCPU3IO
- 1CG95CPU310
- 1CG95CPU31O
- 1CG95CPU3I0
- 1CG95CPU3IO
- 1CG9SCPU310
- 1CG9SCPU31O
- 1CG9SCPU3I0
- 1CG9SCPU3IO
