GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC695CMU310 |
| Series: | RX3i PacSystem |
| UPC: | 449397639798 |
Description:
The GE Fanuc IC695CMU310 is a Max-ON Hot-Standby Redundancy CPU. It is a type of RX3i Series CPU. It comes with a single slot design. At five (5) volts direct current, the power requirement on this module is one (1) ampere. The shipping weight on this module is one (1) pound (lb). There are two (2) communication ports on this module. It comes with a built-in three (3) position switch.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Emerson IC695CMU310 is a Max-ON CPU that can offer a hot-standby CPU redundancy by employing two Rx3i PacSystems. The CPU is employed to achieve real-time monitoring of machines and processes. The device includes 10 megabytes of RAM, 10 megabytes of NVRAM storage and user storage, 32-kilowords for analog I/O, and 32 kilobits discrete I/O. This CPU contains the RS-232 and the RS-485 serial ports to send data, save applications, and update the firmware. The IC695CMU310 includes six LED indicators on the faceplate to show the current CPU status. The device supports Serial I/O, Modbus RTU Slave, and SNP connections. This CPU exchanges data through one or two Ethernet LAN ports. This unit offers an execution speed of 195 microseconds per 100 Boolean coils or contacts.
The IC695CMU310 supports 512 program blocks with 128 kilobytes for each. This device is compatible with expansion racks and the majority of the PCI 2.2 standard. The CPU supports configurable program memory and data. The IC695CMU310 exchanges data with the programmer via serial ports and with I/O and modules via a dual Serial/PCI backplane. This CPU can be programmed using ladder, ST, FBD, and C programming languages. This device has a battery-backed RAM that can store sufficient electrical power to ensure the workability of CPU and memory circuits for a short time when the input power is disconnected or the battery is removed. This device draws a current of 1.25 amperes at a voltage of 3.3 volts DC and 1 ampere at a voltage of 5 volts DC. The IC695CMU310 weighs approximately 450 grams (0.99 pounds) while shipping and operates at 0 degrees to 60 degrees Celsius (32 degrees to 140 degrees Fahrenheit) for industrial applications.
Manufactured by GE Fanuc, the IC695CMU310 max-on hot-standby redundancy CPU is both a hot-standby redundancy CPU and an RX3i PacSystems max-on CPU. Thanks to the dedicated Ethernet LANs, this module is capable of establishing communication with other devices. In order to build a holistic RX3i system application, users must form a connection with multiple sources. Among the sources are an RX3i universal backplane, Series 90-30 expansion backplanes, Ethernet modules, PacSystems devices, etc. For durability and flexibility, this module comes with ten (10) MB (megabytes) of battery backed memory. The IC695CMU310 requires only zero point one nine five (0.195) milliseconds (ms) to execute one hundred (100) Boolean contacts or coils. There are 2 (two) serial communication ports on this module. These ports are the RS-232, as well as the RS-485 serial ports. This GE Fanuc product is in compliance with the PCI 2.2 standards, as well as many other standards. These standards include, but are not limited to, SNP and Modbus RTU slave. The GE Fanuc IC695CMU310 comes with a battery pack that helps maintain memory and storage.
The GE Fanuc IC695CMU310 comes with five hundred and twelve (512) program blocks. For faster processing, it comes equipped with reference table bulk memory accessing. During power outage, the battery pack helps with sustaining the memory storage. Before installation, the backplane power of this device must be turned off. Additionally, located on the front of this product are LED (light-emitting diode) indicators that are used to display the status of the device's CPU.
Technical Specifications
| Brand | GE Automation Fanuc / Emerson Automation |
| Series | PACSystems RX3i |
| Part Number | IC695CMU310 |
| Description | Max-ON hot-standby redundancy CPU |
| Number of slots | 1 |
| Communication ports | RS-232, RS-485 |
| Backplane | Dual backplane |
| Protocol support | Modbus RTU Slave, SNP, Serial I/O |
| Program storage | 10 Mbytes of RAM and User memory |
| Floating point | Supported |
| Power requirement | + 3.3 VDC: 1.25 Amps nominal / +5 VDC: 1.0 Amps nominal |
| Operating temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
| Weight | 450 g (0.99 lb) |
FAQ
Question: Does Automation Stop offer repairs on the IC695CMU310?
Answer: Yes. We offer repairs for the IC695CMU310 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC695CMU310?
Answer: If you buy the IC695CMU310 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC695CMU310 online?
Answer: Yes. Automation Stop sells the IC695CMU310 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC695CMU310?
Answer: The IC695CMU310 is made by Emerson - GE Fanuc.
Question: What Backplane does the Allen Bradley/Rockwell Automation IC695CMU310 have?
Answer: The Allen Bradley/Rockwell Automation IC695CMU310 has a Dual backplane Backplane.
Question: What Brand does the IC695CMU310 have?
Answer: The Allen Bradley IC695CMU310 has a GE Automation Fanuc / Emerson Automation Brand.
Question: What is the Communication ports of the IC695CMU310?
Answer: The IC695CMU310 has a Communication ports of RS-232, RS-485.
Question: What Description is included with the Allen Bradley/Rockwell Automation IC695CMU310?
Answer: The Allen Bradley/Rockwell Automation IC695CMU310 has a Max-ON hot-standby redundancy central processing unit (CPU) Description.
Question: What Floating point does the Rockwell-Automation IC695CMU310 have?
Answer: The Rockwell-Automation IC695CMU310 has a Supported Floating point.
Question: What is the Number of slots of the IC695CMU310?
Answer: The Allen Bradley/Rockwell Automation IC695CMU310 has a Number of slots of 1.
Question: What Operating temperature does the IC695CMU310 have?
Answer: The Operating temperature of the IC695CMU310 is 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit).
Question: What unit Number does the Rockwell Automation IC695CMU310 have?
Answer: The unit Number of the IC695CMU310 is IC695CMU310.
Question: What Power requirement does the Rockwell-Automation IC695CMU310 have?
Answer: The Power requirement of the IC695CMU310 is + 3.3 VDC: 1.25 amperes nominal / +5 VDC: 1.0 amperes nominal.
Question: What is the Program storage of the IC695CMU310?
Answer: The IC695CMU310 has a Program storage of 10 Mbytes of random-access random-access memory (RAM) (RAM) and User random-access memory (RAM).
Question: What Protocol support does the Rockwell Automation IC695CMU310 have?
Answer: The Rockwell Automation IC695CMU310 has a Modbus RTU Slave, SNP, Serial input/output Protocol support.
Question: What Weight does the Allen Bradley-Rockwell Automation IC695CMU310 have?
Answer: The Allen Bradley-Rockwell Automation IC695CMU310 has a Weight of 450 g (0.99 lb).
Series information for IC695CMU310
For additional information about IC695CMU310 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695CMU310.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC695CMU310-BD | IC695CMU310 Series BD, Rev BD | Request a Quote |
| IC695CMU310-BF | IC695CMU310 Series BF, Rev BF | Request a Quote |
| IC695CMU310-DP | IC695CMU310 Series DP, Rev DP | Request a Quote |
Common Misspellings:
- IC695CMU31O
- IC695CMU3I0
- IC695CMU3IO
- IC69SCMU310
- IC69SCMU31O
- IC69SCMU3I0
- IC69SCMU3IO
- ICG95CMU310
- ICG95CMU31O
- ICG95CMU3I0
- ICG95CMU3IO
- ICG9SCMU310
- ICG9SCMU31O
- ICG9SCMU3I0
- ICG9SCMU3IO
- 1C695CMU310
- 1C695CMU31O
- 1C695CMU3I0
- 1C695CMU3IO
- 1C69SCMU310
- 1C69SCMU31O
- 1C69SCMU3I0
- 1C69SCMU3IO
- 1CG95CMU310
- 1CG95CMU31O
- 1CG95CMU3I0
- 1CG95CMU3IO
- 1CG9SCMU310
- 1CG9SCMU31O
- 1CG9SCMU3I0
- 1CG9SCMU3IO
