GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC695CHS012

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC695CHS012
Series: RX3i PacSystem
UPC: 440849352999

Description:

The GE Fanuc/Emerson Automation IC695CHS012 is a PACSystems RX3i universal backplane. The module comes equipped with 12 different slots. The slots can be found on the high-speed controller base. The controller base supports both serial bus and PCI. The module comes with support for hot-swapping. The IC695CHS012 has a power consumption rating of 600 mA at 3.3 VDC and 240 mA at 5 VDC. This backplane has a total heat dissipation of 3.18 W.


Key Features:

  • contains universal backplane

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc Emerson IC695CHS012 is a 12-slot universal backplane for RX3i PACSystems that supports hot-swapping. The IC695CHS012 is a dual-bus backplane that can support I/O Series 90-30, option, high-speed, and PCI serial modules. The IC695CHS012 contains a terminal strip located on the left side to wire an isolated input voltage of 24 Volts DC. The IC695CHS012 should be installed horizontally and can be installed in a secure enclosure with an IP54 rating or higher by leaving a space of 10.16 centimeters (4 inches) from all orientations for heat dissipation. The IC695CHS012 offers more flexibility by supporting expansion bases such as controller and Ethernet baseplates.

The IC695CHS012 consumes a current of 240 milliamperes at a baseplate voltage of 5 Volts DC and a current of 600 milliamperes at a baseplate voltage of 3.3 Volts DC. The IC695CHS012 includes a backplane grounding point and contains an internal grounding bar to link either modules or shield grounds. The IC695CHS012 has a width of 45.74 centimeters (18.01 inches), a height of 14.14 centimeters (5.57 inches), and a depth of 14.732 centimeters (5.8 inches). The IC695CHS012 includes slot numbers which are printed and marked on the backplane to make user configuration easier. The IC695CHS012 is open equipment and has a connector for serial expansion links to serial remote and expansion backplanes. The IC695CHS012 weighs approximately 1.63 kilograms (3.59 pounds) while shipping and operates at zero (0) to 60 degrees Celsius (32 to 140 degrees Fahrenheit) for industrial applications.

The GE Fanuc/Emerson Automation IC695CHS012 is a type of PACSystems RX3i universal backplane. All 12 slots on this universal backplane module come with support for high-speed peripheral component interconnect (PCI). Furthermore, the module also comes with support for serial bus connection. The backplanes provide housing to the RX3i modules. For internal communication between the modules, the IC695CHS012 comes equipped with a communication bus module. 600 mA at 3.3 VDC and 240 mA at 5 VDC is the power consumption rating on this module. The module measures 18.01 x 5.57 x 5.80 in. (457.5 x 141.5 x 147.32 mm). The GE Fanuc/Emerson Automation IC695CHS012 comes with support for horizontal mounting. Users can use any type of enclosure as long as it comes with the IP20/NEMA/UL Type 1 protection rating. When installing the IC695CHS012, operatorsmust ensure that 102 millimeters, or 4 inches, of clearance is met in order to ensure proper air flow. The clearance is required on all sides of the module. The module comes with support for hot-swapping. Unlike other similar modules, it can be inserted, or removed, while still being connected to power. The IC695CHS012 has an internal current rating of 240 mA at 5 VDC and a current rating of 600 milliamps at 3.3 VDC.  The AC power slots on the GE Fanuc IC695CHS012 PACSystems RX3i universal backplane is meant to be used for the 2 slots. The module must be mounted horizontally. The spacing requirement for proper operation is 102 millimeters (4 inches) on each side. This is also necessary for air circulation. 

Technical Specifications

Brand GE Automation Fanuc / Emerson Automation
Series 12 slot universal backplane for RX3i series
Part Number IC695CHS012
Module Type Universal Controller and I/O
Load Requirement 240 mA @ 5 VDC, 600 mA @ 3.3 VDC
Backplane Support PCI and High Speed Serial
Distance N/A
Number of Slots 12
Dimensions 5.57 x 18.01 x 5.80 inches (H x W x D)
Weight 1.63 kg (3.59 lb)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC695CHS012?

Answer: Yes. We offer repairs for the IC695CHS012 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC695CHS012?

Answer: If you buy the IC695CHS012 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC695CHS012 online?

Answer: Yes. Automation Stop sells the IC695CHS012 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC695CHS012?

Answer: The IC695CHS012 is made by Emerson - GE Fanuc.


Question: What Backplane Support does the IC695CHS012 have?

Answer: The IC695CHS012 has a PCI and High Speed Serial Backplane Support.


Question: What Brand is included with the IC695CHS012?

Answer: The Allen Bradley-Rockwell Automation IC695CHS012 has a GE Automation Fanuc / Emerson Automation Brand.


Question: What Dimensions does the Rockwell-Automation IC695CHS012 have?

Answer: The Rockwell-Automation IC695CHS012 has a Dimensions of 5.57 x 18.01 x 5.80 (in) (H x W x D).


Question: What Distance is included with the Allen-Bradley IC695CHS012?

Answer: The IC695CHS012 has a N/A Distance.


Question: What Load Requirement does the IC695CHS012 have?

Answer: The Load Requirement of the IC695CHS012 is 240 mA @ 5 VDC, 600 mA @ 3.3 VDC.


Question: What Module Type does the IC695CHS012 have?

Answer: The Allen Bradley-Rockwell Automation IC695CHS012 has a Universal Controller and input/output Module Type.


Question: What Number of Slots does the IC695CHS012 have?

Answer: The IC695CHS012 has a Number of Slots of 12.


Question: What is the part Number of the IC695CHS012?

Answer: The component Number of the IC695CHS012 is IC695CHS012.


Question: What Weight does the IC695CHS012 have?

Answer: The Rockwell-Automation IC695CHS012 has a Weight of 1.63 kg (3.59 lb).


Series information for IC695CHS012

For additional information about IC695CHS012 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC695CHS012.

Revision Part # Also Known As Availability
IC695CHS012-AA IC695CHS012 Series AA, Rev AA Request a Quote
IC695CHS012-CA IC695CHS012 Series CA, Rev CA Request a Quote
IC695CHS012-FA IC695CHS012 Series FA, Rev FA Request a Quote
IC695CHS012-KD IC695CHS012 Series KD, Rev KD Request a Quote

Common Misspellings:

  • IC695CHS0I2
  • IC695CHSO12
  • IC695CHSOI2
  • IC695CH5012
  • IC695CH50I2
  • IC695CH5O12
  • IC695CH5OI2
  • IC69SCHS012
  • IC69SCHS0I2
  • IC69SCHSO12
  • IC69SCHSOI2
  • IC69SCH5012
  • IC69SCH50I2
  • IC69SCH5O12
  • IC69SCH5OI2
  • ICG95CHS012
  • ICG95CHS0I2
  • ICG95CHSO12
  • ICG95CHSOI2
  • ICG95CH5012
  • ICG95CH50I2
  • ICG95CH5O12
  • ICG95CH5OI2
  • ICG9SCHS012
  • ICG9SCHS0I2
  • ICG9SCHSO12
  • ICG9SCHSOI2
  • ICG9SCH5012
  • ICG9SCH50I2
  • ICG9SCH5O12
  • ICG9SCH5OI2
  • 1C695CHS012
  • 1C695CHS0I2
  • 1C695CHSO12
  • 1C695CHSOI2
  • 1C695CH5012
  • 1C695CH50I2
  • 1C695CH5O12
  • 1C695CH5OI2
  • 1C69SCHS012
  • 1C69SCHS0I2
  • 1C69SCHSO12
  • 1C69SCHSOI2
  • 1C69SCH5012
  • 1C69SCH50I2
  • 1C69SCH5O12
  • 1C69SCH5OI2
  • 1CG95CHS012
  • 1CG95CHS0I2
  • 1CG95CHSO12
  • 1CG95CHSOI2
  • 1CG95CH5012
  • 1CG95CH50I2
  • 1CG95CH5O12
  • 1CG95CH5OI2
  • 1CG9SCHS012
  • 1CG9SCHS0I2
  • 1CG9SCHSO12
  • 1CG9SCHSOI2
  • 1CG9SCH5012
  • 1CG9SCH50I2
  • 1CG9SCH5O12
  • 1CG9SCH5OI2

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP