GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC754VGL06CTD

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC754VGL06CTD
Series: Quickpanel

Description:

Part number IC754VGL06CTD is a QuickPanel View device. This device was designed and manufactured by Emerson - GE Fanuc. This device has a 6-inch colored screen that has a resolution of 320 x 240 pixels. This screen can also display 65,536 colors. This device has an available memory of 64 MB of flash memory, 512 KB of SRAM, 64 MB of DRAM, and512 MB bootloader. This device has two Ethernet ports, as well as two serial ports.


Key Features:

  • comes with 12 - 30 vdc of input power
  • ships with 32 mb memory
  • comes discontinued/obsolete
  • comes with 5 lbs. of shipping weight

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC754VGL06CTD is a QuickPanel View device that is primarily utilized as an operator interface on the manufacturing floor, allowing for centralized control and data access. It features communication interfaces that allow not just point-to-point communication, but also network topologies, and therefore it may be configured to connect to one or more machines. It has a 6-inch color display and an analog resistive touchscreen interface, which lets the operator navigate the runtime program by touching elements on the screen. In addition, the IC754VGL06CTD Smart Display offers a high-definition interface and a variety of settings that allow users to easily customize the operation. It also offers a variety of storage types that allow users to store a large amount of data and information on it. This also makes it work faster. The IC754VGL06CTD display is easy to install and requires only a DC power supply. The DC power supply connects through the quick connector or any additional input connector that the user chooses to use. The IC754VGL06CTD features onboard memory that is properly partitioned to function independently for a seamless user interface. There are four memory divisions: 64 MB flash memory, 512 KB SRAM, 64 MB DRAM, and 512 KB bootloader. The IC754VGL06CTD also has two Ethernet ports with 10/100 megabits per second transmission speeds and a maximum segment length of 100 meters that may be readily extended with an Ethernet switch or media converters. There are two serial ports as well, with port 1 acting as a combo RS-232/422/485 port and port 2 acting as a standalone RS-232 port.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC754VGL06CTD?

Answer: Yes. We offer repairs for the IC754VGL06CTD and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC754VGL06CTD?

Answer: If you buy the IC754VGL06CTD through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC754VGL06CTD online?

Answer: Yes. Automation Stop sells the IC754VGL06CTD online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC754VGL06CTD?

Answer: The IC754VGL06CTD is made by Emerson - GE Fanuc.


Question: What type of product is the IC754VGL06CTD?

Answer: The IC754VGL06CTD is part of the Quickpanel series.


Series information for IC754VGL06CTD

For additional information about IC754VGL06CTD check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC754VGL06CTD.

Revision Part # Also Known As Availability
IC754VGL06CTD-NL IC754VGL06CTD Series NL, Rev NL Request a Quote

Common Misspellings:

  • IC754VGL0GCTD
  • IC754VGLO6CTD
  • IC754VGLOGCTD
  • IC754V6L06CTD
  • IC754V6L0GCTD
  • IC754V6LO6CTD
  • IC754V6LOGCTD
  • IC7S4VGL06CTD
  • IC7S4VGL0GCTD
  • IC7S4VGLO6CTD
  • IC7S4VGLOGCTD
  • IC7S4V6L06CTD
  • IC7S4V6L0GCTD
  • IC7S4V6LO6CTD
  • IC7S4V6LOGCTD
  • 1C754VGL06CTD
  • 1C754VGL0GCTD
  • 1C754VGLO6CTD
  • 1C754VGLOGCTD
  • 1C754V6L06CTD
  • 1C754V6L0GCTD
  • 1C754V6LO6CTD
  • 1C754V6LOGCTD
  • 1C7S4VGL06CTD
  • 1C7S4VGL0GCTD
  • 1C7S4VGLO6CTD
  • 1C7S4VGLOGCTD
  • 1C7S4V6L06CTD
  • 1C7S4V6L0GCTD
  • 1C7S4V6LO6CTD
  • 1C7S4V6LOGCTD

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP