GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Emerson - GE Fanuc |
Product Type: | Automation Product |
Part Number: | IC660EBS103 |
Series: | Genius I/O |
UPC: | 689583949311 |
Description:
The GE Fanuc IC660EBS103 PCI is an interface card. It is manufactured by the GE Intelligent Platforms/Fanuc Automation. This product belongs to the Genius I/O block series. It comes with four (4) different power sources. Ninety-three (93) volts to one hundred and thirty-two (132) volts alternating current (105 to 132 volts DC) is this product's voltage rating. The frequency rating of this Interface card from GE Fanuc is forty-seven (47) to sixty-three (63) hertz.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC660EBS103 interface card, which was designed and manufactured by GE Fanuc, has a temperature range recommended for operation of zero (0) degrees Celsius to sixty (60) degrees Celsius. Its humidity rating should stay within the range of 5% to 95% non-condensing. This interface card is a type of PCI interface card. It is widely used as a Genius LAN interface. It comes with 4-source operating voltage. The voltage rating on this module is ninety-three to one hundred thirty-two (93 to 132) volts alternating current (AC), or one hundred five to one hundred thirty-two (105 to 132) volts direct current (DC). The frequency rating on this module is 47 to 63 hertz. At maximum, the required control power is 8 watts. The shipping dimensions of the IC660EBS103 interface card measure out to 8.83 x 3.50 x 3.94 inches. The approximate shipping weight on this module is 4 pounds or 1.8 kilograms. 1500 Volts is the block-to-block isolation rating. With a maximum of 8 inputs, 16.8 watts is its heat dissipation rating. On the other hand, at a maximum of 8 inputs and 2 amperes power rating, the maximum heat dissipation rating is 45.6 watts. The storage temperature range for this interface card is from negative forty to one hundred (-40 to 100) degrees Celsius. Each of the circuits on this interface card comes with an LED indicator.
Part number IC660EBS103 was manufactured and configured as an input-only block. The operating frequency on this module is 47 to 63 hertz. One (1) cycle is the power supply dropout time on this module. One thousand five hundred (1500) volts is the block to block isolation rating on this module. Each circuit on this module comes with a separately assigned LED indicator.
Question: Does Automation Stop offer repairs on the IC660EBS103?
Answer: Yes. We offer repairs for the IC660EBS103 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC660EBS103?
Answer: If you buy the IC660EBS103 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC660EBS103 online?
Answer: Yes. Automation Stop sells the IC660EBS103 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC660EBS103?
Answer: The IC660EBS103 is made by Emerson - GE Fanuc.
For additional information about IC660EBS103 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC660EBS103.
Revision Part # | Also Known As | Availability |
---|---|---|
IC660EBS103L | IC660EBS103 Series L, Rev L | Request a Quote |
IC660EBS103M | IC660EBS103 Series M, Rev M | Request a Quote |
IC660EBS103P | IC660EBS103 Series P, Rev P | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.