GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC670MDL740

✓ In Stock

IC670MDL740 Image 1 thumbnail
IC670MDL740 Image 2 thumbnail
IC670MDL740 Image 3 thumbnail
IC670MDL740 Image 4 thumbnail
IC670MDL740 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC670MDL740
Series: Field Control
UPC: 799705792968

Description:

The IC670MDL740 is a DC Positive Output Module designed by GE Fanuc Automation. The module consists of sixteen (16) sourcing type discrete outputs. These outputs can switch the loads to the positive side of the DC supply.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC670MDL740 is a DC Positive Output Module from GE Fanuc Automation. The module consists of sixteen (16) sourcing type discrete outputs that can switch the loads to the positive side of the power supply. The power required for the operation of the module is supplied through the power supply of the Bus Interface Unit (BIU). The output module also allows the users to connect external power supply using a 5 Ampere fuse. The module also has individual LEDs for each output on the logic side and these LEDs are visible through the transparent portion of the upper plate of this output module. The outputs of the module can switch the load within a range of 10 Volts to 30 Volts DC with a voltage of 24 Volts DC and the maximum current of 4 Amperes.

The IC670MDL740 Output Module also consists of an output module with an output voltage range of 9.2 Volts to 29.5 Volts DC, maximum output current of 0.5 Amperes per output point, and a maximum output current of 4 Amperes per module. This output module draws 111 milliamperes of current from the Bus Interface Unit’s power supply. The 5 Ampere protection fuse located at the output points can protect the module against noise transients and incorrect polarity in the power supply. The incorrect connections to the power supply can cause this fuse to blow. A blown fuse needs to be replaced immediately to avoid further damages. The IC670MDL740 output module allows the users to detect if the fuse is blown or not. The output module has keying locations, and these locations are labeled as A, C, J, and K. It also includes optoisolators, which isolate the field output from the module’s logic components.

Technical Specifications

Outputs per Module 16
User Input Voltage 10-30 Volts DC, 24 Volts DC nominal, 4 Amperes maximum
Minimum Load Current 1 milliampere per point
Current Drawn from Bus Interface Unit Power Supply 111 milliamperes, maximum
Output Voltage Drop 0.5 milliamperes at 30 Volts DC
Response Time-On 200 microseconds maximum with 0.5 Amperes resistive load
Maximum Load Current (resistive) 0.5 Amperes from 10 Volts DC to 30 Volts DC
Output Current 0.5 Amperes, maximum per point
Output Voltage Range 9.2 Volts DC to 29.5 Volts DC
Inrush Current 2 Ampere maximum for 100 milliseconds
Response Time-Off 200 microseconds maximum with 0.5 Amperes resistive load
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC670MDL740?

Answer: Yes. We offer repairs for the IC670MDL740 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC670MDL740?

Answer: If you buy the IC670MDL740 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC670MDL740 online?

Answer: Yes. Automation Stop sells the IC670MDL740 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC670MDL740?

Answer: The IC670MDL740 is made by Emerson - GE Fanuc.


Question: What is the Current Drawn from Bus Interface Unit power supply unit of the IC670MDL740?

Answer: The Current Drawn from Bus Interface Unit power supply unit of the IC670MDL740 is 111 milliamperes, maximum.


Question: What is the Inrush Current of the IC670MDL740?

Answer: The Inrush Current of the IC670MDL740 is 2 Ampere maximum for 100 milliseconds.


Question: What is the Maximum Load Current (resistive) of the Allen-Bradley IC670MDL740?

Answer: The Maximum Load Current (resistive) of the Allen-Bradley IC670MDL740 is 0.5 Amperes from 10 Volts DC to 30 Volts DC.


Question: What is the Minimum Load Current of the IC670MDL740?

Answer: The Allen Bradley-Rockwell Automation IC670MDL740 has a Minimum Load Current of 1 milliampere per point.


Question: What Output Current does the IC670MDL740 have?

Answer: The Output Current of the Allen Bradley-Rockwell Automation IC670MDL740 is 0.5 Amperes, maximum per point.


Question: What is the Output Voltage Drop of the IC670MDL740?

Answer: The Output Voltage Drop of the IC670MDL740 is 0.5 milliamperes at 30 Volts DC.


Question: What is the Output Voltage Range of the IC670MDL740?

Answer: The Allen Bradley/Rockwell Automation IC670MDL740 has a Output Voltage Range of 9.2 Volts DC (direct current) to 29.5 Volts DC (direct current).


Question: What is the Outputs per Module of the IC670MDL740?

Answer: The Outputs per Module of the IC670MDL740 is 16.


Question: What Response Time-Off does the IC670MDL740 have?

Answer: The Rockwell-Automation IC670MDL740 has a Response Time-Off of 200 microseconds maximum with 0.5 Amperes resistive load.


Question: What is the Response Time-On of the IC670MDL740?

Answer: The Response Time-On of the IC670MDL740 is 200 microseconds maximum with 0.5 Amperes resistive load.


Question: What User Input Voltage does the Rockwell Automation IC670MDL740 have?

Answer: The IC670MDL740 has a User Input Voltage of 10-30 Volts DC (direct current), 24 Volts DC (direct current) nominal, 4 Amperes maximum.


Series information for IC670MDL740

For additional information about IC670MDL740 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC670MDL740.

Revision Part # Also Known As Availability
IC670MDL740K IC670MDL740 Series K, Rev K Request a Quote
IC670MDL740B IC670MDL740 Series B, Rev B Request a Quote
IC670MDL740J IC670MDL740 Series J, Rev J Request a Quote

Common Misspellings:

  • IC670MDL74O
  • IC67OMDL740
  • IC67OMDL74O
  • ICG70MDL740
  • ICG70MDL74O
  • ICG7OMDL740
  • ICG7OMDL74O
  • 1C670MDL740
  • 1C670MDL74O
  • 1C67OMDL740
  • 1C67OMDL74O
  • 1CG70MDL740
  • 1CG70MDL74O
  • 1CG7OMDL740
  • 1CG7OMDL74O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP