GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

IC670ALG330

✓ In Stock

Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC670ALG330
Series: Field Control
UPC: 799705793279

Description:

The 8-channel GE Fanuc IC670ALG330 is an output module. Users can customize the channels completely as per their needs. Also, this output module can be used to convert signals from engineering units into currents output. This device has a power supply rating of 18 to 30 volts DC, with 24 volts DC being typical. The output current of this device ranges from 0 milliamperes to 20.48 milliamperes. This module has a wide range of capabilities and many advanced features. The ambient operating temperature of the IC670ALG330 ranges from 0 to 55 degrees Celsius.


Key Features:

  • comes with current range of 0 to 20.48 milliamps

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The GE Fanuc IC670ALG330 Genius I/O field control module consists of 8-point analog output. It is an analog source output that is designed to use for the Genius I/O Field station. A standard Genius I/O Control station is equipped with 8 Input/Output modules integrated on a block terminal and BIU. The module consists of the broad functionality of host architectures. The architecture is designed to meet various application demands.

The IC670ALG330 module is part of the Field Genus Control Input/Output range. This module has 8 different circuit output channels that come with user-configurable scaling for each point. Furthermore, it comes with a total of 8 current output loops on a single power supply. This analog module captures engineering units (digital data) from the BIU and scales it to meet the output current parameter range of 0 to 20.48 milliamperes. Open-wire detection & an over/under-range alarm are standard diagnostic features on this analog current module.

The over/under-range alarm only trips when the engineering unit value sent by the BIU results in an output value that exceeds the module's default scaling parameters. Other basic features this module is equipped with are the option to separately dictate each output channel as active/inactive, as well as three different scaling sections (pre-defined) and one unit of scaling option (user-defined). The IC670ALG330 analog source module operates with a power supply of 18-30 volts direct current (DC). It draws a maximum of 85 milliamperes of current. The module is programmed with hand-held configuration software and inserted on an Input/Output terminal block, that simplifies field wiring & permits the module to be replaced without rewiring the terminals.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC670ALG330?

Answer: Yes. We offer repairs for the IC670ALG330 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC670ALG330?

Answer: If you buy the IC670ALG330 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC670ALG330 online?

Answer: Yes. Automation Stop sells the IC670ALG330 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC670ALG330?

Answer: The IC670ALG330 is made by Emerson - GE Fanuc.


Series information for IC670ALG330

For additional information about IC670ALG330 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC670ALG330.

Revision Part # Also Known As Availability
IC670ALG330-JB IC670ALG330 Series JB, Rev JB Request a Quote
IC670ALG330-KB IC670ALG330 Series KB, Rev KB Request a Quote

Common Misspellings:

  • IC670ALG33O
  • IC670AL6330
  • IC670AL633O
  • IC67OALG330
  • IC67OALG33O
  • IC67OAL6330
  • IC67OAL633O
  • ICG70ALG330
  • ICG70ALG33O
  • ICG70AL6330
  • ICG70AL633O
  • ICG7OALG330
  • ICG7OALG33O
  • ICG7OAL6330
  • ICG7OAL633O
  • 1C670ALG330
  • 1C670ALG33O
  • 1C670AL6330
  • 1C670AL633O
  • 1C67OALG330
  • 1C67OALG33O
  • 1C67OAL6330
  • 1C67OAL633O
  • 1CG70ALG330
  • 1CG70ALG33O
  • 1CG70AL6330
  • 1CG70AL633O
  • 1CG7OALG330
  • 1CG7OALG33O
  • 1CG7OAL6330
  • 1CG7OAL633O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP