GE / IP FANUC Series 90/30 In Stock
| Manufacturer: | Emerson - GE Fanuc |
| Product Type: | Automation Product |
| Part Number: | IC670ALG240 |
| Series: | Field Control |
| UPC: | 799705796164 |
Description:
The IC670ALG240 is a 16-Point Grouped Input Module that holds sixteen (16) current loop inputs on a common power supply. The acceptance of input is done through two and three-wire current transmission which transforms input value to digital value.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
Pay
We accept credit cards from all major providers, as well as PayPal.
Ship
We offer worldwide shipping with UPS and DHL.
Warranty
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This IC670ALG240 module has 16 distinct channels for input current that range from 0 to 25 mA. This module uses word data type and bit data type with the capability of field recalibration and reset calibration. Flash memory is used for storing calibration data. This module has a 50 and 60 Hertz line frequency data acquisition rate. Noise elimination is also supported in this module through 20-millisecond digital filtering with selectable scaling for the selection of data. Each input channel of the module has its Low Alarm and High Alarm which can be configured easily. It also provides reporting of low/high, under-range and over-range, and open-wire alarms.
This module stores its 16 samples in a buffer. The module is configured from a bus interface unit (BIU). The configurations of the module can be easily read and written from the bus of a compatible system. All input data is provided to BIU from the module and takes clearance of fault commands from BIU through designated output bits. It also features a channel active status, indicating active and inactive channels. A variety of filters such as input filters, line filters, and averaging filters are used for reducing noise effects, and both hardware and software configurable filters are too used for reducing noise. Eleven (11) bytes of data are designated for performing diagnostics. The right bit is set after detection of the diagnostic condition; this is an easy to configure module with enhanced capability of clearing faults and alarms. Sixteen (16) bits of discrete output data are used for clearing module and alarm faults. This IC670ALG240 module is compatible with BIU revision 2.0 and its later versions.
Technical Specifications
| Number of Channels | 16 |
| Temperature Limit, Operational | 0 to 55° Celsius |
| Current (I) Draw | 25.0 milliamperes from BIU |
| Input (max.) | 35.0 milliamperes |
| Current Loop Power Supply 20-28.0 Volts | Input (I/P) Impedance |
| 250.0 Ohms | Open-Wire |
| 2.0 milliamperes, typical | Over Range |
| 25 milliamperes, typical | Under Range (min.) |
| 0 milliamperes | Bits of Converter Resolution |
| 16 | Frequency of I/P Filter Transition |
FAQ
Question: Does Automation Stop offer repairs on the IC670ALG240?
Answer: Yes. We offer repairs for the IC670ALG240 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Emerson - GE Fanuc and IC670ALG240?
Answer: If you buy the IC670ALG240 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the IC670ALG240 online?
Answer: Yes. Automation Stop sells the IC670ALG240 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the IC670ALG240?
Answer: The IC670ALG240 is made by Emerson - GE Fanuc.
Question: What kind of 0 milliamperes does the Allen Bradley Automation IC670ALG240 have?
Answer: The IC670ALG240 has 0 milliamperes Bits of Converter Resolution.
Question: What 16 is included with the Allen-Bradley IC670ALG240?
Answer: The IC670ALG240 has a Frequency of I/P Filter Transition 16.
Question: What 2.0 milliamperes, typical does the IC670ALG240 have?
Answer: The Allen Bradley-Rockwell Automation IC670ALG240 has a Over Range 2.0 milliamperes, typical.
Question: What 25 milliamperes, typical is included with the Rockwell-Automation IC670ALG240?
Answer: The IC670ALG240 has a Under Range (min.) 25 milliamperes, typical.
Question: What kind of 250.0 Ohms does the Rockwell-Automation IC670ALG240 have?
Answer: The Rockwell-Automation IC670ALG240 has 250.0 Ohms Open-Wire.
Question: What is the Current (I) Draw of the IC670ALG240?
Answer: The Current (I) Draw of the IC670ALG240 is 25.0 milliamperes from BIU.
Question: What kind of Current Loop power supply component 20-28.0 Volts does the IC670ALG240 have?
Answer: The IC670ALG240 has Current Loop power supply component 20-28.0 Volts Input (I/P) Impedance.
Question: What is the Input (max.) of the IC670ALG240?
Answer: The Rockwell-Automation IC670ALG240 has a Input (max.) of 35.0 milliamperes.
Question: What Number of Channels does the Allen Bradley Automation IC670ALG240 have?
Answer: The Number of Channels of the IC670ALG240 is 16.
Question: What is the Temperature Limit, Operational of the IC670ALG240?
Answer: The Temperature Limit, Operational of the IC670ALG240 is 0 to 55° Celsius.
Series information for IC670ALG240
For additional information about IC670ALG240 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC670ALG240.
| Revision Part # | Also Known As | Availability |
|---|---|---|
| IC670ALG240-CB | IC670ALG240 Series CB, Rev CB | Request a Quote |
| IC670ALG240-JC | IC670ALG240 Series JC, Rev JC | Request a Quote |
| IC670ALG240-KC | IC670ALG240 Series KC, Rev KC | Request a Quote |
Common Misspellings:
- IC670ALG24O
- IC670AL6240
- IC670AL624O
- IC67OALG240
- IC67OALG24O
- IC67OAL6240
- IC67OAL624O
- ICG70ALG240
- ICG70ALG24O
- ICG70AL6240
- ICG70AL624O
- ICG7OALG240
- ICG7OALG24O
- ICG7OAL6240
- ICG7OAL624O
- 1C670ALG240
- 1C670ALG24O
- 1C670AL6240
- 1C670AL624O
- 1C67OALG240
- 1C67OALG24O
- 1C67OAL6240
- 1C67OAL624O
- 1CG70ALG240
- 1CG70ALG24O
- 1CG70AL6240
- 1CG70AL624O
- 1CG7OALG240
- 1CG7OALG24O
- 1CG7OAL6240
- 1CG7OAL624O
