GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Emerson - GE Fanuc IC670ALG230

✓ In Stock

IC670ALG230 Image 1 thumbnail
IC670ALG230 Image 2 thumbnail
IC670ALG230 Image 3 thumbnail
IC670ALG230 Image 4 thumbnail
IC670ALG230 Image 5 thumbnail
Manufacturer: Emerson - GE Fanuc
Product Type: Automation Product
Part Number: IC670ALG230
Series: Field Control
UPC: 799705802520

Description:

The IC670ALG230 is an 8-Point Analog Current Input module manufactured by GE Fanuc and is from the Genius Field Control I/O series. The module can provide 8 current source inputs that are grouped, and each input channel can accept 0 to 20 milliamperes of the current level input signal.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The IC670ALG230 current source input module is an 8-Point Current Input module by GE Fanuc from the Genius Field Control I/O series. The Genius Field Control system by GE Fanuc provides a cost-effective control solution covering a wide range of control systems. A field control system typically consists of a Bus Interface module that provides I/O scanning, configuration, and intelligent processing. It also includes a connection with a group of I/O modules and a terminal block that provide a base for all the field-side wiring. The IC670ALG230 is a current source input module that can be configured from the Bus Interface Unit (BIU) through a compatible handheld monitor. The configuration parameters of the module can also be written through a bus in applications supporting bus-level configuration.

The IC670ALG230 module has 8 point current source inputs, each of these input channels can accept current level input signals of default 0 to 20 milliamperes. The current level signal received by the module is converted to a 12-bit unscaled input data which is then sent to the Bus Interface Unit that scales on the data and sends it to the host device. The IC670ALG230 analog current source input module can use 24 Volts DC power supply for current loops, but if the system requires point-to-point isolation, a separate power supply needs to be used. The IC670ALG230 module is installed on the terminal block unit that supports I/O module replacement without having to reconfigure the field wiring. The IC670ALG230 module comes with a compact, sturdy aluminum housing that provides a protective environment to the module.

Technical Specifications

Power Supply 24 Volts
Rated Input Voltage 24 Volts DC
Input Voltage Range 0 to +30 Volts DC
User Input Current 8.0 milliamperes per point @ 24 Volts DC
On-State Current 3.0 milliamperes to 8.0 milliamperes
Off-State Current 0 to 1.5 milliamperes
Input Impedance 2.87k typical
Output Voltage Range 15 Volts DC to 30 Volts DC
Outputs per Module 6
Output Voltage Drop 0.2 Volts
Output Leakage Current 0.5 milliamperes @ 30 Volts DC maximum
Maximum Load Current 0.5 Amperes @ 30 Volts DC
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the IC670ALG230?

Answer: Yes. We offer repairs for the IC670ALG230 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Emerson - GE Fanuc and IC670ALG230?

Answer: If you buy the IC670ALG230 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the IC670ALG230 online?

Answer: Yes. Automation Stop sells the IC670ALG230 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the IC670ALG230?

Answer: The IC670ALG230 is made by Emerson - GE Fanuc.


Question: What is the Input Impedance of the Rockwell-Automation IC670ALG230?

Answer: The Input Impedance of the Rockwell-Automation IC670ALG230 is 2.87k typical.


Question: What is the Input Voltage Range of the IC670ALG230?

Answer: The IC670ALG230 has a Input Voltage Range of 0 to +30 Volts direct current.


Question: What is the Maximum Load Current of the Allen Bradley/Rockwell Automation IC670ALG230?

Answer: The Maximum Load Current of the IC670ALG230 is 0.5 Amperes @ 30 Volts direct current.


Question: What is the Off-State Current of the IC670ALG230?

Answer: The Off-State Current of the IC670ALG230 is 0 to 1.5 milliamperes.


Question: What is the On-State Current of the IC670ALG230?

Answer: The Rockwell Automation IC670ALG230 has a On-State Current of 3.0 milliamperes to 8.0 milliamperes.


Question: What Output Leakage Current does the Allen Bradley Automation IC670ALG230 have?

Answer: The Output Leakage Current of the IC670ALG230 is 0.5 milliamperes @ 30 Volts DC (direct current) maximum.


Question: What Output Voltage Drop does the IC670ALG230 have?

Answer: The Output Voltage Drop of the Allen Bradley Automation IC670ALG230 is 0.2 Volts.


Question: What Output Voltage Range does the IC670ALG230 have?

Answer: The Output Voltage Range of the IC670ALG230 is 15 Volts DC to 30 Volts DC.


Question: What is the Outputs per Module of the IC670ALG230?

Answer: The Outputs per Module of the IC670ALG230 is 6.


Question: What power supply unit does the Allen Bradley-Rockwell Automation IC670ALG230 have?

Answer: The Allen Bradley-Rockwell Automation IC670ALG230 has a power supply component of 24 Volts.


Question: What Rated Input Voltage does the Allen Bradley-Rockwell Automation IC670ALG230 have?

Answer: The Rated Input Voltage of the IC670ALG230 is 24 Volts DC (direct current).


Question: What is the User Input Current of the IC670ALG230?

Answer: The IC670ALG230 has a User Input Current of 8.0 milliamperes per point @ 24 Volts DC (direct current).


Series information for IC670ALG230

For additional information about IC670ALG230 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding IC670ALG230.

Revision Part # Also Known As Availability
IC670ALG230C IC670ALG230 Series C, Rev C Request a Quote
IC670ALG230J IC670ALG230 Series J, Rev J Request a Quote

Common Misspellings:

  • IC670ALG23O
  • IC670AL6230
  • IC670AL623O
  • IC67OALG230
  • IC67OALG23O
  • IC67OAL6230
  • IC67OAL623O
  • ICG70ALG230
  • ICG70ALG23O
  • ICG70AL6230
  • ICG70AL623O
  • ICG7OALG230
  • ICG7OALG23O
  • ICG7OAL6230
  • ICG7OAL623O
  • 1C670ALG230
  • 1C670ALG23O
  • 1C670AL6230
  • 1C670AL623O
  • 1C67OALG230
  • 1C67OALG23O
  • 1C67OAL6230
  • 1C67OAL623O
  • 1CG70ALG230
  • 1CG70ALG23O
  • 1CG70AL6230
  • 1CG70AL623O
  • 1CG7OALG230
  • 1CG7OALG23O
  • 1CG7OAL6230
  • 1CG7OAL623O

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP