GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 42DRU-5500 |
Series: | misc |
Description:
The 42DRU-5500 is a photoelectric sensor from the Allen-Bradley/Rockwell Automation. The module belongs to the Photoswitch series. This product is made to fit in a special terminal base named 42DTB-5500. This photoelectric sensor voltage rating is from 13 to 29.5 volts DC. The 42DRU-5500 has a supply current rating of 26 mA at 13 VDC and 30 mA at 29.5 VDC. This photoelectric sensor has a response time of 1 ms.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This 42DRU-5500 photoelectric sensor is a sensor manufactured by Allen-Bradley. The sensor is a part of the Photoswitch line. This 42DRU-5500 sensor can be used for intrinsic safety. The main applications of these sensors are hazardous industrial locations like Class I, II, and III, Division 1, Groups C, D, E, F, and G types of hazardous locations or as Class I, II, and III Division 2, Groups A, B, C, D, F, and G types of hazardous locations. The mounting of this photoelectric sensor on the 42DTB-5500 of Allen–Bradley terminal base. For the perfect fit of sensor and terminal base during mounting, the key is designed for the perfect alignment. This photoelectric sensor comes outfitted with several protection features like output overvoltage protection with barriers, turn-on pulse suppression, and reverse polarity protection. This sensor has a response time of one millisecond. The voltage rating for this sensor ranges from 13 to 29.5 volts DC, and the current rating is 26 mA (milliamperes) max at 13 volts DC & 30 mA (milliamperes) max at 29.5 volts DC. The relative humidity level for this 42DRU-5500 photoelectric sensor is 90% without the consideration of condensation. The sensor should be in an environment with an ambient temperature of -40 to 65 degrees Celsius ( -40 to 150 degrees Fahrenheit). This 42DRU-5500 photoelectric sensor is specially designed to operate in a hazardous industrial location, and it can operate smoothly without any issues. The sensor has dual outputs in the form of one NPN collector and one PNP open collector.
Question: Does Automation Stop offer repairs on the 42DRU-5500?
Answer: Yes. We offer repairs for the 42DRU-5500 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 42DRU-5500?
Answer: If you buy the 42DRU-5500 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 42DRU-5500 online?
Answer: Yes. Automation Stop sells the 42DRU-5500 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 42DRU-5500?
Answer: The 42DRU-5500 is made by Allen Bradley - Miscellaneous.
For additional information about 42DRU-5500 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 42DRU-5500.
Revision Part # | Also Known As | Availability |
---|---|---|
42DRU-5500/A | 42DRU-5500 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.