GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | PLC/Programmable Logic Controller |
Part Number: | 1791DS-IB16 |
Series: | Guard I/O 1791ES and 1791DS |
UPC: | 10612598336057 |
Description:
The Allen-Bradley 1791ES-IB16 is an electronic module from CompactBlock Guard I/O DeviceNet Safety modules. It has 16 current sinking inputs and also 16 current sourcing pulse test outputs. It can be prepared and programmed to get safety information from the network devices, and also used to control and troubleshoot their activities. The temperature range suitable for this device ranges from -20 to 60 degrees Celsius, or -4 to 140 degrees Fahrenheit when converted.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen-Bradley 1791ES-IB16 is an electronic module that belongs to CompactBlock Guard I/O DeviceNet Safety Module, that means that it can perform I/O operations to any DeviceNet point. Of course, that device or point should be prepared to be used for that purpose. Precisely, it has 16 current sinking safety inputs and also 16 current sourcing pulse test outputs. The device is working with a 24V DC voltage and gives up to 700 milliamperes on the output for testing purposes. The on-state minimum input voltage is 11V DC, and the minimum on-state input current is 3.3 milliamperes. The principle is very similar like the other safety devices. It sends request (protocol defined) and waits for response (at sinking source input port), so, in that way the broken line can be detected. Also there are many other combinations that can be simulated in order to get the right status and information. The module has status indicator LEDs. Using it, we can save a lot of time while configuring and testing the whole system. This Allen-Bradley product has a temperature range suitable for operation between negative twenty and positive sixty (-20 and +60) degrees Celsius, or negative four to one hundred and forty (-4 and 140) degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the 1791DS-IB16?
Answer: Yes. We offer repairs for the 1791DS-IB16 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1791DS-IB16?
Answer: If you buy the 1791DS-IB16 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1791DS-IB16 online?
Answer: Yes. Automation Stop sells the 1791DS-IB16 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1791DS-IB16?
Answer: The 1791DS-IB16 is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 1791DS-IB16?
Answer: The 1791DS-IB16 is part of the Guard I/O 1791ES and 1791DS series.
Question: What can I expect the voltage included with the 1791DS-IB16 to be?
Answer: The 1791DS-IB16 by Allen Bradley - Miscellaneous has a voltage of 24.
For additional information about 1791DS-IB16 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1791DS-IB16.
Revision Part # | Also Known As | Availability |
---|---|---|
1791DS-IB16/A | 1791DS-IB16 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.