GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

H-4050-P-H00AA

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: H-4050-P-H00AA
Series: H Series

Description:

The Allen Bradley H-4050-P-H00AA is servo motor belongs to 1398 Ultra series and features neodymium-iron-boron, ferrite, neodymium magnet rotors. This is brushless servo motor with less inertia and can be used with motion control system of Allen Bradley 1398. This motor has a speed of upto 6000 rpm and continuous torque of 5 to 450 lb.-inch. The recommended ambient temperature range of this device to be operational ranges from 32 to 104 degrees Fahrenheit.


Key Features:

  • comes with a frame size of 4050
  • comes with 6 pole(s)
  • is discontinued/obsolete

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

This servo motor, as being part of 1398 Ultra series, can be used with in motion control system. This is brushless servo motor has low inertia which, in turn, helps the device achieve a high acceleration. Neodymium-iron boron magnets are used within the device's design. This motor has a speed of up to 6000 rpm and continuous torque of 5 to 450 lb.-inch. This motor features neodymium-iron-boron, ferrite, neodymium magnet rotors. It comes with IP65 enclosure rating (Environmental connectors) and 2000-line incremental encoder standard. This servo motor can be used Packaging machinery, Smart conveyors, Material feeding, High-duty cycle applications and Pick-and-place machines. The rotor moment of inertia for this servo motor is 0.0041 lbin.s^2 and for brake motors it is 0.0048 lbin.s^2. The friction force is 0.60 lb.-in and damping is 0.40 lb-in./kRPM. Th motor net weight is 21.4 lb. and the brake motor net weight is around 26.0 lb. it comes with the winding and thermal resistance of 0.69 ohm and 0.57 ºC/Watt respectively. it has 6 poles and K_E voltage constant of 60 V/kRPM. It has a storage and operating temperature range of about -25 to 158 ℉ and 32 to 104℉, respectively, with a relative humidity range of 5 to 95%. The module can tolerate up to 10g shock and vibration up to 2.5g at (30-2000 Hz). The rated voltage of the motor is 0-250 volts of direct current, or DC, and a maximum switching current of 5A. The contact is normally closed and insulation dielectric can withstand up to 1500Vac for 1 minute.

Technical Specifications

Manufacturer Allen Bradley
Series H
Product Type Brushless Servo Motor
Motor Model / Frame Size 4050
Motor Winding KE Voltage Designator 60 V/krpm
Optical Encoder Line Count 2000 (STANDARD)
Options Standard
Factory Designated Special Options Standard Flange
MPN H-4050-P-H00AA
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the H-4050-P-H00AA?

Answer: Yes. We offer repairs for the H-4050-P-H00AA and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and H-4050-P-H00AA?

Answer: If you buy the H-4050-P-H00AA through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the H-4050-P-H00AA online?

Answer: Yes. Automation Stop sells the H-4050-P-H00AA online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the H-4050-P-H00AA?

Answer: The H-4050-P-H00AA is made by Allen Bradley - Miscellaneous.


Question: What type of product is the H-4050-P-H00AA?

Answer: The H-4050-P-H00AA is part of the H Series series.


Question: What Factory Designated Special Options are included with the H-4050-P-H00AA?

Answer: The Allen-Bradley H-4050-P-H00AA has Factory Designated Special Options Standard Flange.


Question: What is the Motor Model / Frame Size of the H-4050-P-H00AA?

Answer: The Motor Model / Frame Size of the Allen Bradley-Rockwell Automation H-4050-P-H00AA is 4050.


Question: What Motor Winding KE Voltage Designator does the H-4050-P-H00AA have?

Answer: The H-4050-P-H00AA has a Motor Winding KE Voltage Designator of 60 V/krpm.


Question: What Optical Encoder Line Count does the H-4050-P-H00AA have?

Answer: The Optical Encoder Line Count of the Allen Bradley H-4050-P-H00AA is 2000 (STANDARD).


Question: What Options are included with the H-4050-P-H00AA?

Answer: The H-4050-P-H00AA has Options Standard.


Question: What Product Type does the Rockwell-Automation H-4050-P-H00AA have?

Answer: The Rockwell-Automation H-4050-P-H00AA has a Brushless Servo Motor Product Type.


Series information for H-4050-P-H00AA

For additional information about H-4050-P-H00AA check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding H-4050-P-H00AA.

Revision Part # Also Known As Availability
H-4050-P-H00AA/A H-4050-P-H00AA Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • H-4050-P-H0OAA
  • H-4050-P-HO0AA
  • H-4050-P-HOOAA
  • H-405O-P-H00AA
  • H-405O-P-H0OAA
  • H-405O-P-HO0AA
  • H-405O-P-HOOAA
  • H-40S0-P-H00AA
  • H-40S0-P-H0OAA
  • H-40S0-P-HO0AA
  • H-40S0-P-HOOAA
  • H-40SO-P-H00AA
  • H-40SO-P-H0OAA
  • H-40SO-P-HO0AA
  • H-40SO-P-HOOAA
  • H-4O50-P-H00AA
  • H-4O50-P-H0OAA
  • H-4O50-P-HO0AA
  • H-4O50-P-HOOAA
  • H-4O5O-P-H00AA
  • H-4O5O-P-H0OAA
  • H-4O5O-P-HO0AA
  • H-4O5O-P-HOOAA
  • H-4OS0-P-H00AA
  • H-4OS0-P-H0OAA
  • H-4OS0-P-HO0AA
  • H-4OS0-P-HOOAA
  • H-4OSO-P-H00AA
  • H-4OSO-P-H0OAA
  • H-4OSO-P-HO0AA
  • H-4OSO-P-HOOAA

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP