GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

Allen-Bradley 2707-M232P3

2707-M232P3 Image 1 thumbnail
2707-M232P3 Image 2 thumbnail
2707-M232P3 Image 3 thumbnail
Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 2707-M232P3
Series: Microview 2707

Description:

The 2707-M232P3 has come from Allen-Bradley's DTAM Micro Interface product line and is a DTAM Micro Interface unit. This device has an RS232 communication port that enables it to communicate with PLC5 and SLC500 controllers, allowing for the monitoring and modification of PLC data. This gadget operates on a 24 volt DC voltage supply and has an integrated LCD Screen and keyboard arrangement as the user interface. The 2707-M232P3 features an RS-232 serial communication port set for point-to-point interaction with Allen-Bradley PLC-5, SLC-5, and MicroLogix 1000 equipment. It is equipped with six switching devices that enable it to operate in a variety of modes.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 2707-M232P3 belongs to Allen-Bradley's PLC interface, which is also compatible with PLC-5 & SLC 500 control systems. This item is a DTAM Micro interface that enables administrators and users to get PLC data for the purpose of controlling and manipulating it. This module has an integrated RS232 communication port for initiating data transfer between partnership controllers. This connection port is compatible with PLC5 and SLC500 controllers, more precisely, SLC 5/03, 5/04, and 5/05.

Additionally, the 2707-M232P3 is suitable for programs that need recipe operations. A maximum of ten non-sequential register addresses on each screen could be downloaded using this recipe-type action. Likewise, the DTAM Micro design allows observation and change of data files stored in the system memory of the PLC5 and SLC500. This module has a built-in LCD display panel. This panel may show 2-lines of information that can include up to twenty characters. Supervisors and users can interact and execute required tasks and orders using the embedded keypad, which includes eight function keys, a number keyboard, a navigation keyboard, and confirmation switches. Additionally, an LED indicator is supplied to indicate the status of the interface's self-diagnostic checks.

The 2707-M232P3 unit is supplied by a 24VDC external power source connected to the DTAM's power ports. This gadget may also be powered using an AC to DC adaptor. The sealed membrane, tactile feedback keyboard with numeric, directional, and eight functional buttons (F1 to F8) comprise the 2707-M232P3 input interface. It has an operating force of 453 g and approximately 1 million operational cycles.

The 2707-M232P3 features a permanent power cable that enables for the connection of 24V DC power to the terminal, a functional input voltage of 18-30 volts DC, and a maximum input current of 200mA. A temperature range of 0 to 55 C (32 to 131 degrees Fahrenheit) when operating is recommended. Without condensation, a relative humidity limit of 5 to 95 percent should be maintained. A storage temperature range of -20 to 70 degrees Celsius (-4 to 158 degrees Fahrenheit) should also be maintained. The 2707-M232P3 is designed to sustain a 30 g operational shock and weighs about 0.45 kg, and measures 99.1mm x 137.2mm x 45.7mm on a net basis.

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 2707-M232P3?

Answer: Yes. We offer repairs for the 2707-M232P3 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 2707-M232P3?

Answer: If you buy the 2707-M232P3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 2707-M232P3 online?

Answer: Yes. Automation Stop sells the 2707-M232P3 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 2707-M232P3?

Answer: The 2707-M232P3 is made by Allen Bradley - Miscellaneous.


Question: What type of product is the 2707-M232P3?

Answer: The 2707-M232P3 is part of the Microview 2707 series.


Series information for 2707-M232P3

For additional information about 2707-M232P3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2707-M232P3.

Revision Part # Also Known As Availability
2707-M232P3/A 2707-M232P3 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 27O7-M232P3

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP