GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1609-B600N |
Series: | Allen Bradley 1609 |
Description:
The Allen Bradley 1609-B600N Uninterruptible Power Supply basic model operates with an output Voltage of 120 VAC and a Current of 600VA or 360 Watts. It has a panel-mount type and weighs about 6.6 kilograms (14.5 pounds).
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 1609-B600N Uninterruptible Power Supply is one of Allen Bradley’s manufactured 1609 family series of industrial power supplies. The Uninterruptible Power Supply is used extensively in industrial applications, typically for Supervisory Control and Data Acquisition (SCADA) workstations to forestall the unconventional shutdown of workstation computers. Furthermore, it produces environments for flexible installation that also includes control panels with UPS. The UPS supports maintaining the power of the control devices during power inconstancies and provides excellent support for systems that need to operate with high availability. Standard powered devices are Human Machine Interface (HMI), Programmable Logic Controllers (PLC), 24VDC power supplies, and other control components. The front of the UPS includes 3-dry I/O contacts and one remote enable/disable switch connection. The 3-dry contacts need external power supplies though the remote enable/disable switch doesn't need any external power. It has Hard-wired input and output with electrical codes that typically do not allow plug-in connections within a control panel. It also provides USB communications. The 1609-B600N Uninterruptible Power Supply has an expandable battery capacity batteries can be added to UPS to increase its run-time or support additional equipment. Its built-in battery operates for 2-3 years at 25 °C ambient temperature. But in case of battery degradation, a chargeable sealed Lead-Acid battery was designed to be replaced. Lead-Acid battery needs about 12 hours to reach 90% capacity, and it can last for 5 minutes at 25 degrees Celsius and a full-load. The 1609-B600N power supply does not contain a power factor correction (PFC) aptitude, and it works on 50 to 60 Hertz frequency with a deviation of 3 Hertz in either direction.
Question: Does Automation Stop offer repairs on the 1609-B600N?
Answer: Yes. We offer repairs for the 1609-B600N and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1609-B600N?
Answer: If you buy the 1609-B600N through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1609-B600N online?
Answer: Yes. Automation Stop sells the 1609-B600N online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1609-B600N?
Answer: The 1609-B600N is made by Allen Bradley - Miscellaneous.
For additional information about 1609-B600N check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1609-B600N.
Revision Part # | Also Known As | Availability |
---|---|---|
1609-B600N/A | 1609-B600N Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.