GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 1606-XL480E-3 |
Series: | Allen Bradley 1606 |
UPC: | 10662073044052 |
Description:
The Allen Bradley 1606-XL480E-3 is a three-phase power supply module. This power supply module can be used in parallel operations and offers over voltage protection. It is rated for a voltage of 480 volts AC and produces an output voltage of 24 volts DC. The output can be adjusted using a built-in potentiometer. The power supply features four (4) large aluminum electrolytic capacitors that allow for a long lifecycle. This module has a 92 percent efficiency rating.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This is the 1606-XL480E-3 power supply module offered by Allen Bradley. This module is a three-phase power supply that has a nominal input voltage rating of 480 volts AC (alternating current). It features a simple fusing design and is suitable for use in IT systems. This power supply operates with a typical efficiency of up to 92 percent. It features connection blocks that are mounted on the front panel and are easy to reach. The power supply has an input current rating of 1.5 amperes. It produces an output voltage of 24 to 28 volts DC (direct current) that is adjustable using an integrated potentiometer mounted at the front. This Allen Bradley module can operate within a temperature range of 0 degrees Celsius to 70 degrees Celsius. The power supply features over voltage protection by switching to hiccup mode when the voltage exceeds 32 volts. It supports parallel operation with up to ten (10) units in use simultaneously. The module has built-in LEDs, or light emitting diodes, that indicate the output voltage status. The power supply supports the use of PVC insulated cable. Supported wire sizes are 20 to 10 AWG (0.5 to 4 millimeters squared) for a stranded cable and 0.5 to 6 millimeters squared for a solid cable. The dimensions of this module measure 220 millimeters x 124 millimeters x 102 millimeters. The manufacturer recommends leaving 70 millimeters of free space above and below the module, as well as 25 millimeters on the sides in order to ensure appropriate ventilation.
Question: Does Automation Stop offer repairs on the 1606-XL480E-3?
Answer: Yes. We offer repairs for the 1606-XL480E-3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 1606-XL480E-3?
Answer: If you buy the 1606-XL480E-3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 1606-XL480E-3 online?
Answer: Yes. Automation Stop sells the 1606-XL480E-3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 1606-XL480E-3?
Answer: The 1606-XL480E-3 is made by Allen Bradley - Miscellaneous.
Question: What VAC (voltage alternating current) is included with the 1606-XL480E-3?
Answer: The 1606-XL480E-3 has a voltage alternating current (VAC) of 480.
For additional information about 1606-XL480E-3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 1606-XL480E-3.
Revision Part # | Also Known As | Availability |
---|---|---|
1606-XL480E-3/A | 1606-XL480E-3 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.