GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 100-D300ED11 |
Series: | Allen Bradley 100 |
Description:
The 100-D300ED11 is an IEC contactor that is produced by Allen-Bradley. The contactor belongs to the 100 series and is available with an integrated surge suppressor. The contactor requires an input of 110-130 VAC and has an output current rating of 300 amperes. The 100-D300ED11 has three poles and comes with two auxiliary contacts, one NO and one NC. This Allen-Bradley module can be used with both AC and DC programmable logic controller interfaces.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This 100-D300ED11 is a three-pole IEC contactor device that is manufactured by Allen-Bradley. The device is part of the 100 line of IEC contactors. This contractor has a current rating of 300 amperes and a voltage rating range from between 110 to 130 volts AC. This contactor is available with an electronic coil, auxiliary contacts, and an electronic interface. This three-pole IEC contactor is available with one normally open contactor, and one normally closed contact. This contactor is used with single and three-phase devices. The operating frequency of the 100-D300ED11 is in the range of between 50 to 60 Hz. The 100-D300ED11 can work in both reversing functions and non-reversing functions, and this kind of contactor can be mounted using a panel or DIN rail. This contactor is compatible with both AC and DC PLC interfaces. The 100-D300ED11 contactor is available with connecting bars, terminal shield, and terminal lugs, and these devices can be used as accessories. These contactor mechanical latches and interlocks are easy to use. This 100-D300ED11 contactor has the feature of having an integrated surge suppressor that helps to minimize or control unwanted surges while the coil drops off. This connector is compatible with Bulletin 193K bimetallic overload relay. This connector is widely used for industrial applications, particularly commercial and lightweight applications. This contactor uses a timer unit that includes a 3 mm hat rail adapter. The temperature is set from 0 to 40 degrees Celsius, and it is recommended not to expose the module to sources of high heat or noise.
Question: Does Automation Stop offer repairs on the 100-D300ED11?
Answer: Yes. We offer repairs for the 100-D300ED11 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 100-D300ED11?
Answer: If you buy the 100-D300ED11 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 100-D300ED11 online?
Answer: Yes. Automation Stop sells the 100-D300ED11 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 100-D300ED11?
Answer: The 100-D300ED11 is made by Allen Bradley - Miscellaneous.
For additional information about 100-D300ED11 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 100-D300ED11.
Revision Part # | Also Known As | Availability |
---|---|---|
100-D300ED11/A | 100-D300ED11 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.