GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 100-D115EZJ11 |
Series: | Allen Bradley 100 |
Description:
The 100-D115EZj11 is an Allen-Bradley IEC Contactor and part of the Bulletin 100-D series. It features 3 poles, 3 phases, and a current rating of 115 amperes. It does not come with reversing functionalities. The 100-D115EZj11 comes with both electronic and conventional coils. These coils can support both AC and DC current. The rated voltage of this device is 24 volts direct current (DC). This device came operate in temperatures ranging from -25 degrees Celsius to +60 degrees Celsius.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 100-D115EZJ11 is a contactor. It belongs to the Allen-Bradley IEC series. It is also a part of the Bulletin 100-D series of products. Additionally, new advance technologies were incorporated into this contactor to enhance its overall performance. It must be supplied with 115 amperes of current. At 230 volts, the output power rating for this module is 37 kilowatts. At 690 volts, the output power rating for this module 110 kilowatts. The internal electric circuit comes with components that can effectively divert power surge. To ensure durability, this contactor can minimize tear, and wear on its external layer.
The 100-D115EZJ11 does not come with reversing capabilities. This contactor can transfer motor direction using 2 wires. This contactor features many standard industrial traits such as the 3 phases and 3 poles, as well as one (1) normally open and one (1) normally closed (NC) auxiliary contacts. The input coil can be used to integrate the PLC control module. This makes controlling the control circuits very easy. The control circuits usually require low voltage current.
The 100-D115EZJ11 comes with a voltage rating of 24 volts direct current. The highest temperature rating for this module is 60 degrees Celsius, and the minimum temperature rating for this device is -25 degrees Celsius. This connector can be used with 6 AWG to 300 MCM conductor size.
The 100-D115EZJ11 can be panel mounted. This device has shipping dimensions of 120 millimeters x 156 millimeters x 170 millimeters. It comes with the following industrial compliance standards: C-TICK, CE, CUL, CCC, UL, and KC.
Question: Does Automation Stop offer repairs on the 100-D115EZJ11?
Answer: Yes. We offer repairs for the 100-D115EZJ11 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 100-D115EZJ11?
Answer: If you buy the 100-D115EZJ11 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 100-D115EZJ11 online?
Answer: Yes. Automation Stop sells the 100-D115EZJ11 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 100-D115EZJ11?
Answer: The 100-D115EZJ11 is made by Allen Bradley - Miscellaneous.
For additional information about 100-D115EZJ11 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 100-D115EZJ11.
Revision Part # | Also Known As | Availability |
---|---|---|
100-D115EZJ11/A | 100-D115EZJ11 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.