GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

871D-DW2NP1159-D4

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Automation Product
Part Number: 871D-DW2NP1159-D4
Series: 871D

Description:

The 871D-DW2NP1159-D4 is a 3-Wire DC Cylinder Sensor by Allen-Bradley and Rockwell Automation. It has a maximum load current of ?200 milliamperes and an operating voltage of 10?30 Volts DC. This 871D-DW2NP1159-D4 has reverse polarity, false pulse, transient noise, and overload protection.



Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 871D-DW2NP1159-D4 is a 3-Wire DC Cylinder Sensor that is manufactured and branded by Allen-Bradley and Rockwell Automation. The 871D-DW2NP1159-D4 has normally open outputs, a maximum load current of ˂200 milliamperes, and a nominal load current of ≤10 mA (non-activated), ≤18 mA (activated). Leakage current for the 871D-DW2NP1159-D4 3-Wire Cylinder Sensor is ˂80 microamperes while operating voltage is 10…30 Volts DC. This hardware has a voltage drop of ˂2.5 Volts DC at 200 milliamperes. Switching frequency is 10 Hertz and repeatability is 5% typical. The 871D-DW2NP1159-D4 3-Wire DC Cylinder Sensor has a hysteresis of 15% typical and has reverse polarity, false pulse, transient noise, short circuit, and overload protections. The 871D-DW2NP1159-D4 has a weld field immunity of 20,000 Amperes at 25.4 millimeters (1 inch).

Agency certifications for the 871D-DW2NP1159-D4 include c-UL-us Listed and CE Marked for all applicable directives. It has an enclosure type rating that is compliant with NEMA 1, 2, 3, 3R, 4, 6, 12, 13, and IP67 (IEC 529). For connection type, the 871D-DW2NP1159-D4 uses Quick Disconnect, with 4-pin mini style and 4-pin M12 micro style. The 871D-DW2NP1159-D4 3-Wire DC Cylinder Sensor comes standard with LED status indicators for power (green) and output (orange). This hardware can operate within a temperature that ranges between -25 and 70 degrees Celsius, or 13 to 158 degrees Fahrenheit. The 871D-DW2NP1159-D4 3-Wire DC Cylinder Sensor can withstand a shock value of 30 g (1.06 ounces) for 11 milliseconds. It can withstand a vibration rating of 55 Hertz, 1-millimeter amplitude, 3 planes, and uses machined aluminum for its housing material. The 871D-DW2NP1159-D4 uses stainless steel and ceramic face for its probe material.

Technical Specifications

Brand Allen-Bradley/Rockwell Automation
Part Number 871D-DW2NP1159-D4
Product Type 3-Wire DC Cylinder Sensor
Outputs Normally Open
Maximum Load Current ˂200 milliamperes
Nominal Load Current ≤10 mA (non-activated), ≤18 mA (activated)
Leakage Current ˂80 microamperes
Operating Voltage 10…30 Volts DC
Voltage Drop ˂2.5 Volts DC at 200 milliamperes
Switching Frequency 10 Hertz
Repeatability 5% Typical
Hysteresis 15% Typical
Protections Reverse Polarity, False Pulse, Transient Noise, Short Circuit, and Overload
Weld Field Immunity 20,000 Amperes at 25.4 millimeters (1 inch)
We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 871D-DW2NP1159-D4?

Answer: Yes. We offer repairs for the 871D-DW2NP1159-D4 and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 871D-DW2NP1159-D4?

Answer: If you buy the 871D-DW2NP1159-D4 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 871D-DW2NP1159-D4 online?

Answer: Yes. Automation Stop sells the 871D-DW2NP1159-D4 online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 871D-DW2NP1159-D4?

Answer: The 871D-DW2NP1159-D4 is made by Allen Bradley - Miscellaneous.


Question: What Brand is included with the 871D-DW2NP1159-D4?

Answer: The 871D-DW2NP1159-D4 has a Allen Bradley (AB)/Rockwell Automation Brand.


Question: What is the Hysteresis of the 871D-DW2NP1159-D4?

Answer: The Hysteresis of the 871D-DW2NP1159-D4 is 15% Typical.


Question: What Leakage Current does the Allen Bradley/Rockwell Automation 871D-DW2NP1159-D4 have?

Answer: The Leakage Current of the 871D-DW2NP1159-D4 is ˂80 microamperes .


Question: What Maximum Load Current does the 871D-DW2NP1159-D4 have?

Answer: The Maximum Load Current of the Rockwell Automation 871D-DW2NP1159-D4 is ˂200 milliamperes.


Question: What Nominal Load Current does the 871D-DW2NP1159-D4 have?

Answer: The 871D-DW2NP1159-D4 has a Nominal Load Current of ≤10 mA (non-activated), ≤18 mA (activated).


Question: What Operating Voltage does the 871D-DW2NP1159-D4 have?

Answer: The Operating Voltage of the 871D-DW2NP1159-D4 is 10…30 Volts direct current (DC).


Question: Does the Allen Bradley 871D-DW2NP1159-D4 have a Outputs?

Answer: Normally Open.


Question: What is the unit Number of the 871D-DW2NP1159-D4?

Answer: The Allen Bradley-Rockwell Automation 871D-DW2NP1159-D4 has a component Number of 871D-DW2NP1159-D4.


Question: What is the Product Type of the 871D-DW2NP1159-D4?

Answer: The Product Type of the 871D-DW2NP1159-D4 is 3-Wire DC (direct current) Cylinder sensor component.


Question: Does the Allen Bradley Automation 871D-DW2NP1159-D4 have a Protections?

Answer: Reverse Polarity, False Pulse, Transient Noise, Short Circuit, and Overload.


Question: What Repeatability does the 871D-DW2NP1159-D4 have?

Answer: The Repeatability of the Rockwell Automation 871D-DW2NP1159-D4 is 5% Typical.


Question: What is the Switching Frequency of the Allen Bradley 871D-DW2NP1159-D4?

Answer: The Switching Frequency of the Allen Bradley 871D-DW2NP1159-D4 is 10 Hertz.


Question: What is the Voltage Drop of the 871D-DW2NP1159-D4?

Answer: The Allen Bradley 871D-DW2NP1159-D4 has a Voltage Drop of ˂2.5 Volts direct current (DC) at 200 milliamperes.


Question: What is the Weld Field Immunity of the 871D-DW2NP1159-D4?

Answer: The Weld Field Immunity of the 871D-DW2NP1159-D4 is 20,000 Amperes at 25.4 millimeters (1 inch).


Series information for 871D-DW2NP1159-D4

For additional information about 871D-DW2NP1159-D4 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 871D-DW2NP1159-D4.

Revision Part # Also Known As Availability
871D-DW2NP1159-D4/A 871D-DW2NP1159-D4 Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 871D-DW2NP11S9-D4
  • 871D-DW2NP1I59-D4
  • 871D-DW2NP1IS9-D4
  • 871D-DW2NPI159-D4
  • 871D-DW2NPI1S9-D4
  • 871D-DW2NPII59-D4
  • 871D-DW2NPIIS9-D4
  • 87ID-DW2NP1159-D4
  • 87ID-DW2NP11S9-D4
  • 87ID-DW2NP1I59-D4
  • 87ID-DW2NP1IS9-D4
  • 87ID-DW2NPI159-D4
  • 87ID-DW2NPI1S9-D4
  • 87ID-DW2NPII59-D4
  • 87ID-DW2NPIIS9-D4
  • B71D-DW2NP1159-D4
  • B71D-DW2NP11S9-D4
  • B71D-DW2NP1I59-D4
  • B71D-DW2NP1IS9-D4
  • B71D-DW2NPI159-D4
  • B71D-DW2NPI1S9-D4
  • B71D-DW2NPII59-D4
  • B71D-DW2NPIIS9-D4
  • B7ID-DW2NP1159-D4
  • B7ID-DW2NP11S9-D4
  • B7ID-DW2NP1I59-D4
  • B7ID-DW2NP1IS9-D4
  • B7ID-DW2NPI159-D4
  • B7ID-DW2NPI1S9-D4
  • B7ID-DW2NPII59-D4
  • B7ID-DW2NPIIS9-D4

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP