GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 800Z-GL2Q5 |
Series: | 800Z |
Description:
The 800Z-GL2Q5 is a general-purpose zero force touch button that is designed and manufactured by Allen-Bradley. They are members of the 800Z zero force touch button series. The 800Z-GL2Q5 has an input voltage of 10 to 40 VDC or 20 to 30 VAC. The 800Z-GL2Q5 registers a maximum on-delay of 76 milliseconds and a maximum off-delay of 60 milliseconds. The 800Z-GL2Q5 has a vibration displacement of 1.52 mm at 10 G.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 800Z-GL2Q5 is a zero force touch button that is manufactured by Allen-Bradley. The 800Z-GL2Q5 is a member of the 800Z zero force touch button series. They are reliable with an operating voltage of 10 to 40 VDC or 20 to 30 VAC. They are ideal for use in modern day repetitive motion applications where a button has to be pushed multiple times. This series is preferred because of the reliability and durability they offer. These buttons are compact in size and have a unique sensing technology that can differentiate between human touch and foreign object touch. They have self-diagnostic feature which is very beneficial for industrial applications. Every time an issue occurs a fault signal is sent to the LED indicator. These buttons are used globally as they meet the required standards. They are available in two types of configurations. There is a general configuration for general use and an industrial configuration for heavy scale industrial use. They are designed in such a way that they are medically structured according to the shape of the hand. The design helps with reducing the chance of disease and nerve disorders. This button has simple wiring and easy configuration.This wiring means that the 800Z-GL2Q5 can easily be disconnected. The unit has to be installed following all installation guidelines given by the manufacturer for proper operation. If guidelines are not properly followed accurate performance will not be achieved. This button has NEMA Type ingress protection. The 800Z-GL2Q5 has a relay outputs and offers extreme reliability.
Question: Does Automation Stop offer repairs on the 800Z-GL2Q5?
Answer: Yes. We offer repairs for the 800Z-GL2Q5 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 800Z-GL2Q5?
Answer: If you buy the 800Z-GL2Q5 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 800Z-GL2Q5 online?
Answer: Yes. Automation Stop sells the 800Z-GL2Q5 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 800Z-GL2Q5?
Answer: The 800Z-GL2Q5 is made by Allen Bradley - Miscellaneous.
For additional information about 800Z-GL2Q5 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 800Z-GL2Q5.
Revision Part # | Also Known As | Availability |
---|---|---|
800Z-GL2Q5/A | 800Z-GL2Q5 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.