GE / IP FANUC Series 90/30 In Stock

Email

[email protected]

Call Now

(919) 867-5794

Mon-Fri 8AM-5PM EST

6186M-12PT

Manufacturer: Allen Bradley - Miscellaneous
Product Type: Industrial Computer
Part Number: 6186M-12PT
Series: Monitor 6186M

Description:

The Allen Bradley 6186M-12PT is a performance industrial monitor from Rockwell Automation. It has an aluminum bezel and a 12.1-inch display with a typical contrast ratio of 600:1. The computer uses a touch screen to register operator inputs. The 6186M-12PT can be powered by an AC power input with a range of 100 to 240 VAC or a DC power source with a range of 9 to 36 VDC. The module cannot be powered by both at the same time, however.


Key Features:

  • contains 11 lbs. of shipping weight

Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.

  Pay

We accept credit cards from all major providers, as well as PayPal.

  Ship

We offer worldwide shipping with UPS and DHL.

  Warranty

We proudly offer a one year Automation Stop warranty on most products.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

The 6186M-12PT performance monitor is ideally suited for specialized environments like Class 1 Division 2 and Food and Beverage zones. Integrate this monitor with any non-display computer from Allen-Bradley to build a visualization, maintenance, control, or application solution.

The 6186M-12PT features a 12.1-inch active matrix display with a native resolution of 800 x 600. The display screen is able to show 262 thousand colors and has a brightness of 400 Nits. Its display area is 9.7 inches x 7.3 inches. The computer comes with a status indicator backlight with a lifespan of 50,000 hours at 77 degrees Fahrenheit. It also contains a resistive touch screen with an anti-glare coating that offers a wide viewing angle and a user-friendly input system. A touch screen interface with a monitor is set up using either a serial RS-232 or a USB connection. The 6186M-12PT has a DVI port and a VGA port for the digital and analog video source, respectively. It also has 2 USB device ports and 1 type B USB port for connection with a host computer. It has buttons at the monitor's rear panel to adjust the on-screen display (OSD). The OSD features several controls that are available to operators including automatic screen setup, horizontal and vertical position, brightness, color balance, image lock, contrast, and sync detect. The monitor can be supplied by the integrated AC adapter, 100 to 240 VAC input, or by an external 9 to 36 VDC power source linked to the terminal block. Ensure to use one source at a time. If the additional ground is required, utilize the functional ground screw in the monitor's I/O port panel.

Technical Specifications

Region of Manufacture* China
Type Operator Interface Panel

*Region of Manufacture may vary

We offer UPS shipping. Including Ground, 2nd Day Air, Next Day Air and Early AM. Some of our products have a short lead time, so please contact us if you need any item faster than the lead time shown. If you need to order an item internationally please contact us prior to checking out so we can get you a shipping quote. We can ship UPS or DHL internationally. We can also ship on your UPS or FedEx account number.
If the item is found to be defective within 30 days of the invoice date, a full refund can be issued. If an item is found to be defective through normal use and wear after 30 days but within the 1 year period, the Automation Stop Warranty dictates the appropriate course of action. After the 30 day period, Automation Stop reserves the right to decide between refund, repair, or replacement with identical product. Because of the high volume of outgoing and incoming shipments on a day to day basis, we unfortunately cannot accept returns on items ordered mistakenly or part numbers ordered incorrectly. If a special exception is approved, a 20% restocking fee will be assessed. If you have any questions please contact us at [email protected].

FAQ

Question: Does Automation Stop offer repairs on the 6186M-12PT?

Answer: Yes. We offer repairs for the 6186M-12PT and it comes with our 1 Year Automation Stop Warranty.


Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 6186M-12PT?

Answer: If you buy the 6186M-12PT through Automationstop.com it comes with our 1 Year Warranty and no other warranties.


Question: Can I buy the 6186M-12PT online?

Answer: Yes. Automation Stop sells the 6186M-12PT online and you can check out for the quantity and condition listed available above.


Question: What is the manufacturer for the 6186M-12PT?

Answer: The 6186M-12PT is made by Allen Bradley - Miscellaneous.


Question: What type of product is the 6186M-12PT?

Answer: The 6186M-12PT is part of the Monitor 6186M series.


Question: What Region of Manufacture* does the Allen Bradley/Rockwell Automation 6186M-12PT have?

Answer: The Allen Bradley/Rockwell Automation 6186M-12PT has a China Region of Manufacture*.


Series information for 6186M-12PT

For additional information about 6186M-12PT check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 6186M-12PT.

Revision Part # Also Known As Availability
6186M-12PT/A 6186M-12PT Ser A, Series A, Rev A Request a Quote

Common Misspellings:

  • 6186M-I2PT
  • 618GM-12PT
  • 618GM-I2PT
  • 61B6M-12PT
  • 61B6M-I2PT
  • 61BGM-12PT
  • 61BGM-I2PT
  • 6I86M-12PT
  • 6I86M-I2PT
  • 6I8GM-12PT
  • 6I8GM-I2PT
  • 6IB6M-12PT
  • 6IB6M-I2PT
  • 6IBGM-12PT
  • 6IBGM-I2PT
  • G186M-12PT
  • G186M-I2PT
  • G18GM-12PT
  • G18GM-I2PT
  • G1B6M-12PT
  • G1B6M-I2PT
  • G1BGM-12PT
  • G1BGM-I2PT
  • GI86M-12PT
  • GI86M-I2PT
  • GI8GM-12PT
  • GI8GM-I2PT
  • GIB6M-12PT
  • GIB6M-I2PT
  • GIBGM-12PT
  • GIBGM-I2PT

Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.

Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

TOP