GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Industrial Computer |
Part Number: | 6182H-15TRH4D |
Series: | Display 6182H |
Description:
Part number 6182H-15TRH4D is a VersaView 1500 interface terminal that was designed and manufactured by Allen Bradley. This terminal is equipped with a touchscreen that has a display area of 15 inches and can display color. Additionally, this terminal is equipped with an RS-232 serial port, as well as an Ethernet port. This interface terminal requires an input voltage of 24 volts DC nominal, with a range of 18 to 32 volts DC. The rated power consumption of this device is 70 watts maximum.
Key Features:
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 6182H-15TRH4D, which was designed and produced by Allen Bradley / Rockwell Automation, is a VersaView 1500 series interface terminal. This terminal must be mounted on a panel for installation. the primary input interface of this device is a touchscreen. For communication, it is equipped with both an RS-232 and Ethernet ports. Using these ports, users can integrate other additional communication modules to this terminal. It has an input power requirement of 24 volts direct current (DC). The power consumption rating of this terminal is 70 watts maximum, or 2.9 amperes at 24 volts DC. For fast processing, the 6182H-15TRH4D comes with 128 megabytes of memory. The screen of this terminal has a display area that measures 15 inches and is capable of displaying full color graphics. This terminal has an operating temperature that ranges from 0 to 55 degrees Celsius, or 32 to 131 degrees Fahrenheit. The storage temperature of this device, however, should remain within a range of -25 to 70 degrees Celsius, or -13 to 158 degrees Fahrenheit. The Allen Bradley 6182H-15TRH4D has a relative humidity rating of 5 percent to 95 percent non-condensing. The rated heat dissipation of this terminal is 240 BTU/hr. This terminal can withstand an operational shock of 15 g at 11 milliseconds, as well as a non-operational shock of 30 g at 11 milliseconds. This terminal has physical dimensions that measures 330 mm x 416 mm x 65 mm, or 12.97 inches x 16.37 inches x 2.55 inches. the weight of this terminal is approximately 4.2 kilograms.
Question: Does Automation Stop offer repairs on the 6182H-15TRH4D?
Answer: Yes. We offer repairs for the 6182H-15TRH4D and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 6182H-15TRH4D?
Answer: If you buy the 6182H-15TRH4D through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 6182H-15TRH4D online?
Answer: Yes. Automation Stop sells the 6182H-15TRH4D online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 6182H-15TRH4D?
Answer: The 6182H-15TRH4D is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 6182H-15TRH4D?
Answer: The 6182H-15TRH4D is part of the Display 6182H series.
For additional information about 6182H-15TRH4D check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 6182H-15TRH4D.
Revision Part # | Also Known As | Availability |
---|---|---|
6182H-15TRH4D/A | 6182H-15TRH4D Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.