GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 5069-OBV8S |
Series: | 5069 |
Description:
The 5069-OBV8S is an 18 to 32 volts direct current, 8-point, safety output module that may be utilized as either a bipolar or a sourcing output module. The module, which is part of the Compact 5000 module family, was designed and produced by Allen Bradley. The maximum off-state current per channel of this Allen Bradley module is less than ten milliamperes, and the maximum off-state voltage is 0.5 volts direct current. This Allen Bradley module's maximum leakage current per point is 1.5 milliamperes.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Allen Bradley 5069-OBV8S acts as a safety input or output device for the Allen Bradley Compact 5000 Input / Output systems. The 5069-OBV8S can function as a bipolar output module, as well as a sourcing output module. In addition to that, it also has a minimum on-state voltage of 17.5 volts, a nominal on-state voltage of twenty-four (24) volts, along with a maximum on-state voltage of thirty-two (32) volts of direct current. Furthermore, the maximum on-state voltage drop is 0.5 volts of direct current.
The maximum off-state voltage is 0.5 volts of direct current while the on-state current per channel is less than ten (10) milliamperes. The maximum leakage current per point for this Allen Bradley module is 1.5 milliamperes. Furthermore, the rated output current per channel is 1 ampere, and the maximum surge current per point is one-point-five (1.5) amperes. The main features of this module include eight (8) outputs and a rated power of one (1) ampere per channel when installed horizontally.
Moreover, this Allen Bradley device consists of an electronic module keying and a rated isolation voltage of two hundred and fifty (250) volts of continuous electricity for basic isolation. The module slot width is 1.5 slots. The physical dimensions of this device measure 5.7 inches x x1.4 inches x 4.1 inches (height x width x depth). The weight of this module is approximately 0.5 pounds. The enclosure of this Allen Bradley module is not designed for ingress protection. This Allen Bradley module is wired with copper wire and requires one (1) wire per terminal for each signal port.
Question: Does Automation Stop offer repairs on the 5069-OBV8S?
Answer: Yes. We offer repairs for the 5069-OBV8S and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 5069-OBV8S?
Answer: If you buy the 5069-OBV8S through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 5069-OBV8S online?
Answer: Yes. Automation Stop sells the 5069-OBV8S online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 5069-OBV8S?
Answer: The 5069-OBV8S is made by Allen Bradley - Miscellaneous.
For additional information about 5069-OBV8S check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 5069-OBV8S.
Revision Part # | Also Known As | Availability |
---|---|---|
5069-OBV8S/A | 5069-OBV8S Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.