GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 5069-IF8 |
Series: | CompactLogix 5069 |
Description:
The Allen-Bradley 5069-IF8 is an analog module. Analog modules convert analog data into digital values for input and convert digital value inputs to analog values outputs. These signals are used by controllers for control purposes. The Allen-Bradley 5069-IF8 module uses Removal Terminal Blocks in order to connect field-side wiring. This device is equipped with an open-type enclosure and 8 LEDs. This product has a maximum current of 75 milliamperes. The operating temperature range of this device is 0 to 60 degrees Celsius.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 5069-IF8 is an analog input module for Compact I/O. It features a total of eight differential input channels. The producer-consumer network communication paradigm is used in this module. This sort of communication is intelligent in the sense that it exchanges data between modules and other connected devices, with each module producing data without being polled first. When this module is operated by users with the Logix 5000 control system, the owner-controller stores configuration data for each of its modules, which is then backed up in a location beside the 5069 Compact Input or Output system, and also transfers the configuration data of the Input or Output module to define the behavior of the module and start running. The 5069-AEN2TR Ethernet/IP adapter supplies system and field power to the 5069-IF8 Compact I/O system. The 5069 I/O module requires system-side power to transport data and perform logic. Furthermore, the 5069 Compact Input or Output system requires field-side current to power up the field-side devices linked to the 5069 Compact Input or Output system. The drive includes 8 LEDs in an open-type housing. The voltage for the 5069-IF8 bus power module is 18 to 32 volts direct current (DC). It has a maximum current of 75 milliamperes. The field power range of the 5069-IF8 is 18 to 32 volts DC, while the pass-through voltage range is 0 to 32 volts DC. The maximum power dissipation for the 5069-IF8 is 2.1 watts in voltage mode and 2.4 watts in current mode. The rated thermal dissipation for the 5069-IF8 is 7.2 BTU/hr in voltage mode and 8.2 BTU/hr in current mode. This module has an operating temperature that ranges from 0 to 60 degrees Celsius.
Question: Does Automation Stop offer repairs on the 5069-IF8?
Answer: Yes. We offer repairs for the 5069-IF8 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 5069-IF8?
Answer: If you buy the 5069-IF8 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 5069-IF8 online?
Answer: Yes. Automation Stop sells the 5069-IF8 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 5069-IF8?
Answer: The 5069-IF8 is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 5069-IF8?
Answer: The 5069-IF8 is part of the CompactLogix 5069 series.
For additional information about 5069-IF8 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 5069-IF8.
Revision Part # | Also Known As | Availability |
---|---|---|
5069-IF8/A | 5069-IF8 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.