GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 5069-IB8SK |
Series: | 5069 |
Description:
The Allen-Bradley 5069-IB8SK input module is a safety sinking input module that belongs to the CompactLogix 5069 series. This safety input module uses a DC voltage in the range between 18 to 32 volts DC. The 5069-IB8SK has eight sinking input channels. The 5069-IB8SK has an input rating of 2.5 mA per channel and a power dissipation rate of 3.5 watts. This module comes with one module status indicator light, one power status indicator light, and twelve I/O status indicator lights.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This 5069-IB8SK module is a safety input/output module from the Allen-Bradley CompactLogix 5069 series. The module is available with eight sinking inputs. The 5069-IB8SK is considered a safety input module, and it is conformally coated to prevent corrosion. This safety module operates with DC power with a rated voltage range of 18 to 32 volts DC. This safety input module also supports the different wiring setups, and it can be wired for applications in Categories 1, 2, 3, and 4. The user can select the input delay times anywhere between zero to fifty milliseconds for both the off-to-on delay and on-to-off delay. This safety input module has on-state voltage ratings of 10 volts DC minimum, 24 volts DC nominal, and 32 volts DC maximum. This safety input module belongs to CompactLogix 5069 series, and it can support the on-state current levels of 1.8 mA minimum, 2 mA nominal, and 2.2 mA maximum. In addition to the eight sinking output channels, this module has two test output channels. The maximum power dissipation rate is 3.5 watts, and the maximum thermal dissipation rate is 4 watts. This module isolation voltage rate is 250 volts for the insulation type. This module has one slot width. This module can be mounted on a DIN rail or removable terminal block. This input module can operate in the temperature range from 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) and a storage temperature range between -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).
Question: Does Automation Stop offer repairs on the 5069-IB8SK?
Answer: Yes. We offer repairs for the 5069-IB8SK and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 5069-IB8SK?
Answer: If you buy the 5069-IB8SK through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 5069-IB8SK online?
Answer: Yes. Automation Stop sells the 5069-IB8SK online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 5069-IB8SK?
Answer: The 5069-IB8SK is made by Allen Bradley - Miscellaneous.
For additional information about 5069-IB8SK check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 5069-IB8SK.
Revision Part # | Also Known As | Availability |
---|---|---|
5069-IB8SK/A | 5069-IB8SK Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.