GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 500-GOD930 |
Series: | 500 |
Description:
The Allen Bradley's 500-GOD930 is an AC Contactor from bulletin 500 NEMA contractors by Rockwell Automation. It has a NEMA size of 6, which allows a continuous ampere rating of 540 amperes. It consists of 3 power poles, coil voltages of 110 Vac @ 50 hertz and 120 Vac @ 60 hertz. It is an open-type, top wire contractor. It can be wired for 3 phase applications only. It is only available factory assembled.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The 500-GOD930 is an open-type AC (alternating current) contractor, which belongs to the bulletin, 500 contractors. It features top wiring connections to provide ease for wiring. And it is only applicable for three-phase applications. It does not offer the feasibility of ordering individual components as it is factory assembled product. It is UL as well as a CSA-certified product.
The 500-GOD930 features NEMA size 6. It has a continuous current rating and service limit current rating of 540 and 621 amperes, respectively. It has the following maximum power rating (in horsepower) corresponding to 3 phase motor loads voltages; 150 hp @ 200 Volts, 200 hp @ 230 Volts, 300 hp @ 380 Volts, 400 hp @ 460 - 575 Volts. It has a maximum rated inrush current of 6326 amperes on circuit closing including offset. It has a rated capacitor switching of 160 kVAR at 230 Volts, 320 kVAR at 460 volts, and 400 kVAR at 575 Volts. It includes a coil with the following electrical ratings; 110 Volts AC (alternating current) at a frequency of 50 hertz and 120 Volts AC at a frequency of 60 hertz.
It has a mechanical life of 5 million operations. It offers a maximum of 4 auxiliary contacts, which are normally open contacts (N.O). It has an average pick-up and drop-out operating time (in milliseconds) of 25 - 70 and 10 - 22. Its power contacts are made up of silver alloy, and the material for auxiliary contacts is silver. It is operated in a horizontal position.
Question: Does Automation Stop offer repairs on the 500-GOD930?
Answer: Yes. We offer repairs for the 500-GOD930 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 500-GOD930?
Answer: If you buy the 500-GOD930 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 500-GOD930 online?
Answer: Yes. Automation Stop sells the 500-GOD930 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 500-GOD930?
Answer: The 500-GOD930 is made by Allen Bradley - Miscellaneous.
Question: What voltage is included with the 500-GOD930?
Answer: The 500-GOD930 by Allen Bradley - Miscellaneous has a voltage of 600.
For additional information about 500-GOD930 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 500-GOD930.
Revision Part # | Also Known As | Availability |
---|---|---|
500-GOD930/A | 500-GOD930 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.