GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 500-EOD930 |
Series: | 500 |
Description:
Designed and manufactured by Allen Bradley, part number 500-EOD930 is an AC motor contactor. This product belongs to the Bulletin 500 series of products. This contactor has a NEMA size of 4. It has a voltage rating of 110 to 120 volts AC with a frequency range of 50 to 60 hertz. The maximum current load of this contactor is rated at 135 amperes. This device has an output power rating of 100 horsepower (Hp). This contactor does not have an enclosure.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Part number 500-EOD930, which was designed and manufactured by Allen Bradley / Rockwell Automation, is an AC motor contactor from the Bulletin 500 series of products. The 500 series is home to many powerful auxiliary units and assembly kits for most NEMA sizes. This contactor has a rated NEMA size of 4. When it comes to the power requirements of this contactor, there are a wide variety of them. This contactor has a nominal coil voltage of 110 volts to 120 volts for its three-phase operations. Additionally, this device operates at a frequency range of 50 hertz to 60 hertz. In addition, it can load 135 amperes of maximum current while it generates a full 100 horsepower (Hp) rating at 480 volts to 575 volts AC voltage range. Besides that, this contactor's power rating at 200 volts AC is 40 horsepower, and 50 horsepower at 230 volts AC. Furthermore, its voltage and current ratings support one auxiliary contact. This device is equipped with three (3) power poles that are used for contact configuration. The Allen Bradley 500-EOD930 contactor does not have an enclosure. This means that this device is that of an open type. This contactor should only be operated by trained personnel to ensure the safety of the unit and the underlying hardware systems, as well as the safety of all personnel and operators involved. This contactor has an operating temperature that ranges from -25 to +65 degrees Celsius, or the equivalent range of -13 to +149 degrees Fahrenheit.
Question: Does Automation Stop offer repairs on the 500-EOD930?
Answer: Yes. We offer repairs for the 500-EOD930 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 500-EOD930?
Answer: If you buy the 500-EOD930 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 500-EOD930 online?
Answer: Yes. Automation Stop sells the 500-EOD930 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 500-EOD930?
Answer: The 500-EOD930 is made by Allen Bradley - Miscellaneous.
Question: What can I expect the voltage included with the 500-EOD930 to be?
Answer: The Allen Bradley - Miscellaneous 500-EOD930 includes a voltage of 120.
For additional information about 500-EOD930 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 500-EOD930.
Revision Part # | Also Known As | Availability |
---|---|---|
500-EOD930/A | 500-EOD930 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.