GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440G-TZS21UPLH |
Series: | 440G |
Description:
This 440G-TZS21UPLH is a guard locking switch manufactured by Allen-Bradley, and it is part of the Guardmaster safety relays series. This switch operates on a solenoid voltage of 24 volts AC/DC. The 440G-TZS21UPLH has a maximum target distance of 13 mm (0.51 in) and a 4 mm (0.16 in) maximum clearance between the actuator base and switch door. All outputs on this locking switch have a maximum output current of 200 mA.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This 440G-TZS21UPLH is a guard locking switch, and it is manufactured by Allen-Bradley. This locking switch is part of the Guardmaster TLS-ZR-GD2 line. This switch is designed to provide high-tech data and safety interlock solutions. This switch operates at a voltage of 24 volts DC. This switch is available with one PNP auxiliary contact and two PNP safety contacts. This guard locking switch is intended for the application of the guard locking system, and it will help to achieve the intended performance. This switch system includes RFID door targets along with the existing mechanical configuration. It is easy to mount this locking switch on a fully flexible actuator. This switch system is available with integral microprocessor technology along with two OSSD outputs and a locking and unlocking mechanism that works out on the entire signal input. This guard locking switch and guardmaster TLS-ZR-GD2 product includes the feature of having an RFID door target provide internal microprocessor information on the door position, and it indicates that if in case there is a missing or broken actuator key immediately, the microprocessor shuts the OSSD safety outputs. Each switch contains semiconductor OSSD safety outputs, and it can be connected in a series with the other safety components that are having OSSD solid-state outputs like the SensaGuard range of contactless switches. In this locking switch, there is a stainless actuator guide that destroys the damage that may be caused by the guard wear or poor guard alignment. This module has a maximum target distance of 13 mm (0.51 in.).
Question: Does Automation Stop offer repairs on the 440G-TZS21UPLH?
Answer: Yes. We offer repairs for the 440G-TZS21UPLH and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440G-TZS21UPLH?
Answer: If you buy the 440G-TZS21UPLH through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440G-TZS21UPLH online?
Answer: Yes. Automation Stop sells the 440G-TZS21UPLH online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440G-TZS21UPLH?
Answer: The 440G-TZS21UPLH is made by Allen Bradley - Miscellaneous.
For additional information about 440G-TZS21UPLH check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440G-TZS21UPLH.
Revision Part # | Also Known As | Availability |
---|---|---|
440G-TZS21UPLH/A | 440G-TZS21UPLH Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.