GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 440E-LL5SE5 |
Series: | 440E |
Description:
This 440E-LL5SE5 is a Lifeline 5 cable pull switch, and it is manufactured by Allen-Bradley/Rockwell Automation. This Allen-Bradley cable pull switch features e-stop capability and comes with two OSSD outputs and one auxiliary output. This cable pull switch has a 5-pin micro connection and a 5-pin micro to ArmorBlock Guard input/output connection. The 440E-LL5SE5 has a voltage rating of 24 volts DC. The 440E-LL5SE5 has a response time (off) of 60 ms, with 5 ms added for every additional switch connected.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
This 440E-LL5SE5 is a Lifeline 5 cable pull switch that is manufactured by Allen-Bradley/Rockwell Automation. This switch is available with two OSSD outputs as well as single auxiliary output. In addition to this, the switch also contains a 440E-LL5SE5 cable-pull switch that provides a 5-pin micro connection & a 5-pin micro to ArmorBlock Guard I/O connection. This cable pull switch comes outfitted with the optional e-stop feature. The 440E-LL5SE5 has an operating voltage rating of 24 volts DC. This cable pull switch has a response time for an off-state condition of 60 ms. The cable length of the pull switch is 100 meters, and it will be used to connect the cables with catalog numbers 889D-F5AC-5 & 889D-F4ACDM-2. The 440E-LL5SE5 is housed in an aluminum casing that has a washdown rating of IP66. The operating temperature range of this Lifeline 5 cable pull switch is -20 to 75 degrees Celsius (-4 to 167 degrees Fahrenheit). The operating torque and lockout torque of these switches are 135 N-m (30.35 lb-in) and 195 N-m (43.84 lb-in), respectively. The frequency of this switch operating cycle is 0.25 Hz, and the off-state current output is less than 0.5 mA (milliamps). The 440E-LL5SE5 cable pull switch output has a no-load supply current rating of less than 50 mA, the maximum load current is 200 milliamps, and the voltage drop is less than two volts. This switch has an enclosure that will carry an IP66 protection rating. This switch device is manufactured according to safety standards.
Question: Does Automation Stop offer repairs on the 440E-LL5SE5?
Answer: Yes. We offer repairs for the 440E-LL5SE5 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 440E-LL5SE5?
Answer: If you buy the 440E-LL5SE5 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 440E-LL5SE5 online?
Answer: Yes. Automation Stop sells the 440E-LL5SE5 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 440E-LL5SE5?
Answer: The 440E-LL5SE5 is made by Allen Bradley - Miscellaneous.
For additional information about 440E-LL5SE5 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 440E-LL5SE5.
Revision Part # | Also Known As | Availability |
---|---|---|
440E-LL5SE5/A | 440E-LL5SE5 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.