GE / IP FANUC Series 90/30 In Stock
Manufacturer: | Allen Bradley - Miscellaneous |
Product Type: | Automation Product |
Part Number: | 2198-S160-ERS3 |
Series: | Kinetix 5700 |
UPC: | 887172714627 |
Description:
The Allen-Bradley produced 2198-S160-ERS3 has a continuous output power of 60.1 kilowatts, a torque value of 22-40 lb*in (2.5-4.5 N*m), and an internal capacitance of 1120 microfarad. The 2198-S160-ERS3 has an operating heat dissipation related to the inverter's percentage rated output power of 270 watts at 20 percent, 420 watts at 40 percent, 570 watts at 60 percent, 760 watts at 80 percent, and 950 watts at 100 percent consumption of output power. It measures about 252 millimeters x 478 millimeters x 100 millimeters.
Automation Stop is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with Automation Stop's 1-year warranty.
We accept credit cards from all major providers, as well as PayPal.
We offer worldwide shipping with UPS and DHL.
We proudly offer a one year Automation Stop warranty on most products.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Allen-Bradley's 2198-S160-ERS3 Kinetix 5700 series inverter component is a single-axis inverter device utilized in a variety of integrated motion control applications. The inverter has a loop bandwidth of 400 hertz, or 100 hertz, and a control (Pulse width modulation) frequency of 4000 hertz. This device has output supply ratings of 85 amperes rms, 120.2 amperes (0-pk) with a maximum of 160 amperes rms, and 226.2 amperes (0-pk). The 2198-S160-ERS3 provides a 3-phase power output of 60.1 kilowatts, a capacitance of 1120 microfarad on the internal circuit, and a 458 to 747 volts DC. The input current of this device is 92.3 amperes. This 2198-S160-ERS3 inverter has a controlling current in the range of 4.6 amperes once the servo motor is connected to a 24 volts DC power source, and a controlling current in the range of 9.6 amperes at a voltage of 24 volts DC when this servo motor is provided with a brake for safety reasons. Four (4) amperes inrush current is required at 24 volts DC.
Motor and auxiliary feedback are delivered using the universal feedback connection (with 15 pins), as well as the motors feedback connection with two pins, both of which are pre-installed with an Ethernet network networking interface. This module also has an operating temperature range that varies between 0 and 50 degrees Celsius at a maximum humidity level of 95% non-condensing, as well as a storage temperature of -40 to 70 degrees Celsius. It can endure an operating shock of 15G and vibration of 2G at 55 to 500 hertz. This product was designed to operate at altitudes up to, but not exceeding, 1500 meters, or the equivalent of 4921 feet without de-rating. The 2198-S160-ERS3 weighs around 6.8 kilograms.
Question: Does Automation Stop offer repairs on the 2198-S160-ERS3?
Answer: Yes. We offer repairs for the 2198-S160-ERS3 and it comes with our 1 Year Automation Stop Warranty.
Question: What type of warranty comes with the Allen Bradley - Miscellaneous and 2198-S160-ERS3?
Answer: If you buy the 2198-S160-ERS3 through Automationstop.com it comes with our 1 Year Warranty and no other warranties.
Question: Can I buy the 2198-S160-ERS3 online?
Answer: Yes. Automation Stop sells the 2198-S160-ERS3 online and you can check out for the quantity and condition listed available above.
Question: What is the manufacturer for the 2198-S160-ERS3?
Answer: The 2198-S160-ERS3 is made by Allen Bradley - Miscellaneous.
Question: What type of product is the 2198-S160-ERS3?
Answer: The 2198-S160-ERS3 is part of the Kinetix 5700 series.
Question: What amperage does the Allen Bradley - Miscellaneous 2198-S160-ERS3 have?
Answer: The 2198-S160-ERS3 has a amperage of 65.
For additional information about 2198-S160-ERS3 check the data sheet or manual. Also check the manual PDF for all wiring diagrams, compatibility, troubleshooting, specifications, installation instructions, and accessories (such as batteries, terminal blocks, or cables) regarding 2198-S160-ERS3.
Revision Part # | Also Known As | Availability |
---|---|---|
2198-S160-ERS3/A | 2198-S160-ERS3 Ser A, Series A, Rev A | Request a Quote |
Common Misspellings:
Automation Stop sells used surplus products. Automation Stop is not an authorized distributor, affiliate, or representative for the brands we carry. Products sold by Automation Stop come with Automation Stop’s 1-year warranty and do not come with the original manufacturer’s warranty. Designated trademarks, brand names and brands appearing herein are the property of their respective owners. This website is not sanctioned or approved by any manufacturer or tradename listed.
Rockwell Disclaimer: The product is used surplus. Automation Stop is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Automation Stop is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Automation Stop also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Automation Stop also makes no representations as to your right to install any such firmware on the product. Automation Stop will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.